================================================================================

                                  UNITED STATES
                       SECURITIES AND EXCHANGE COMMISSION
                             WASHINGTON, D.C. 20549

                                    FORM 10-K

[X]   ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(D) OF THE SECURITIES EXCHANGE
      ACT OF 1934

For the fiscal year ended December 31, 2007

OR

[ ]   TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(D) OF THE SECURITIES
      EXCHANGE ACT OF 1934

                          Commission file number 0-1227

                           CHICAGO RIVET & MACHINE CO.
             (Exact name of registrant as specified in its charter)

            ILLINOIS                                     36-0904920
    (State of incorporation)             (I.R.S. Employer Identification Number)

901 FRONTENAC ROAD, NAPERVILLE, ILLINOIS                   60563
(Address of principal executive offices)                 (Zip Code)

       Registrant's telephone number, including area code: (630) 357-8500

Securities registered pursuant to Section 12(b) of the Act:

       Title of Each Class            Name of Each Exchange on Which Registered
  ------------------------------      -----------------------------------------
  Common Stock - $1.00 Par Value               American Stock Exchange
(including Preferred Stock Purchase   (Trading privileges only, not registered)
            Rights)

        Securities registered pursuant to Section 12(g) of the Act: None

Indicate by check mark if the registrant is a well-known seasoned issuer, as
defined in Rule 405 of the Securities Act. Yes [ ] No [X]

Indicate by check mark if the registrant is not required to file reports
pursuant to Section 13 or Section 15(d) of the Act. Yes [ ] No [X]

Indicate by check mark whether the registrant (1) has filed all reports required
to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during
the preceding 12 months (or for such shorter period that the registrant was
required to file such reports), and (2) has been subject to such filing
requirements for the past 90 days. Yes [X] No [ ]

Indicate by check mark if disclosure of delinquent filers pursuant to Item 405
of Regulation S-K is not contained herein, and will not be contained, to the
best of registrant's knowledge, in definitive proxy or information statements
incorporated by reference in Part III of this Form 10-K or any amendment to this
Form 10-K. [X]

Indicate by check mark whether the registrant is a large accelerated filer, an
accelerated filer, a non-accelerated filer, or a smaller reporting company. See
the definitions of "large accelerated filer","accelerated filer" and "smaller
reporting company" in Rule 12b-2 of the Exchange Act. (Check one):

          Large accelerated filer [ ]          Accelerated Filer [ ]

            Non-accelerated filer [ ]          Smaller reporting company [X]
(Do not check if a smaller reporting company)

Indicate by check mark whether the registrant is a shell company (as defined in
Rule 12b-2 of the Act). Yes [ ] No [X]

The aggregate market value of common stock held by non-affiliates of the Company
as of June 30, 2007 was $19,978,273.

As of March 18, 2008 966,132 shares of the Company's common stock were
outstanding.

                      DOCUMENTS INCORPORATED BY REFERENCE

(1) Portions of the Company's Annual Report to Shareholders for the year ended
December 31, 2007 (the "2007 Report") are incorporated by reference in Parts I
and II of this report.

(2) Portions of the Company's definitive Proxy Statement which is to be filed
with the Securities and Exchange Commission in connection with the Company's
2008 Annual Meeting of Shareholders are incorporated by reference in Part III of
this report.

================================================================================


                           CHICAGO RIVET & MACHINE CO.
                         PERIOD ENDING DECEMBER 31, 2007



Item                                                                        Page
 No.                                                                         No.
----                                                                        ----
                                                                      
                                     Part I

1.     Business                                                               3
1A.    Risk Factors                                                           4
1B.    Unresolved Staff Comments                                              6
2.     Properties                                                             6
3.     Legal Proceedings                                                      6
4.     Submission of Matters to a Vote of Security Holders                    7

                                     Part II

5.     Market for Registrant's Common Equity, Related Stockholder
          Matters and Issuer Purchases of Equity Securities                   9
6.     Selected Financial Data                                                9
7.     Management's Discussion and Analysis of Financial Condition and
          Results of Operations                                               9
7A.    Quantitative and Qualitative Disclosures About Market Risk            12
8.     Financial Statements and Supplementary Data                           13
9.     Changes in and Disagreements with Accountants on Accounting and
          Financial Disclosure                                               13
9A.    Controls and Procedures                                               13

                                    Part III

10.    Directors, Executive Officers and Corporate Governance                14
11.    Executive Compensation                                                14
12.    Security Ownership of Certain Beneficial Owners and Management
          and Related Stockholder Matters                                    14
13.    Certain Relationships and Related Transactions, and Director
          Independence                                                       14
14.    Principal Accountant Fees and Services                                14

                                     Part IV

15.    Exhibits and Financial Statement Schedules                            15



                                       2



                                     PART I

ITEM 1 - BUSINESS

     Chicago Rivet & Machine Co. (the "Company") was incorporated under the laws
of the State of Illinois in December 1927, as successor to the business of
Chicago Rivet & Specialty Co. The Company operates in two segments of the
fastener industry: fasteners and assembly equipment. The fastener segment
consists of the manufacture and sale of rivets, cold-formed fasteners and parts
and screw machine products. The assembly equipment segment consists primarily of
the manufacture of automatic rivet setting machines, automatic assembly
equipment, parts and tools for such machines, and the leasing of automatic rivet
setting machines. For further discussion regarding the Company's operations and
segments, see Note 8 of the financial statements which appears on page 9 of the
Company's 2007 Annual Report to Shareholders. The 2007 Annual Report is filed as
an exhibit to this report.

     The principal market for the Company's products is the North American
automotive industry. Sales are solicited by employees and by independent sales
representatives.

     The segments in which the Company operates are characterized by active and
substantial competition. No single company dominates the industry. The Company's
competitors include both larger and smaller manufacturers, and segments or
divisions of large, diversified companies with substantial financial resources.
Principal competitive factors in the market for the Company's products are
price, quality and service.

     The Company serves a variety of customers. Revenues are primarily derived
from sales to customers involved, directly or indirectly, in the manufacture of
automobiles and automotive components. Information concerning backlog of orders
is not considered material to the understanding of the Company's business due to
relatively short production cycles. The level of business activity for the
Company is closely related to the overall level of industrial activity in the
United States. During 2007, sales to two customers exceeded 10% of the Company's
consolidated revenues. Sales to Fisher & Company accounted for approximately 29%
and 28% of the Company's consolidated revenues in 2007 and 2006, respectively.
Sales to TI Group Automotive Systems Corporation accounted for approximately 14%
and 13% of the Company's consolidated revenues in 2007 and 2006.

     The Company's business has historically been stronger during the first half
of the year.

     The Company purchases raw material from a number of sources, primarily
within the United States. There are numerous sources of raw material, and the
Company does not have to rely on a single source for any of its requirements.
Beginning early in 2004, the cost of raw materials used in the manufacture of
fasteners escalated sharply due to increased global demand, primarily in Asia.
While prices for ferrous materials have been relatively stable during the last
two years, the price of non-ferrous materials continued to increase
significantly during the same period.

     Patents, trademarks, licenses, franchises and concessions are not of
significant importance to the business of the Company.

     The Company does not engage in significant research activities, but rather
in ongoing product improvement and development. The amounts spent on product
development activities in the last two years were not material.

     At December 31, 2007, the Company employed 252 people.


                                       3



     The Company has no foreign operations, and sales to foreign customers
represent only a minor portion of the Company's total sales.

ITEM 1A - RISK FACTORS

     Our business is subject to a number of risks and uncertainties. If any of
the events contemplated by the following risks actually occur, then our
business, financial condition or results of operations could be materially
adversely affected. Additional risks and uncertainties not currently known to us
or that we currently deem to be immaterial may also materially and adversely
affect our business, financial condition and results of operations.

WE ARE DEPENDENT ON THE DOMESTIC AUTOMOTIVE INDUSTRY.

     Demand for our products is directly related to conditions in the domestic
automotive industry, which is highly cyclical and is affected by a variety of
factors, including regulatory requirements, international trade policies, and
consumer spending and preferences. The domestic automotive industry is
characterized by significant overcapacity, fierce competition and significant
pension and health care liabilities, and automotive production in the United
States has declined between 1999 and 2007. Certain domestic automakers and
component suppliers, including several of our customers, are financially
distressed or may become financially distressed. In recent years, our gross
margins have been negatively impacted in part due to the declines in domestic
automotive production, and we have experienced increased accounts receivable
write-offs as a result of bankruptcy filings by some of our customers. Any
further decline in the domestic automotive industry could have a material
adverse effect on our business, results of operations and financial condition.

WE FACE INTENSE COMPETITION.

     We compete with a number of other manufacturers and distributors that
produce and sell products similar to ours. Price, quality, and service are the
primary elements of competition. Our competitors include a large number of
independent domestic and international suppliers. We are not as large as a
number of these companies and do not have as many financial or other resources.
The competitive environment has also changed dramatically over the past several
years as our customers, faced with intense international competition and
pressure to reduce costs, have expanded their worldwide sourcing of components.
As a result, we have experienced competition from suppliers in other parts of
the world that enjoy economic advantages, such as lower labor costs and lower
health care costs. There can be no assurance that we will be able to compete
successfully with existing or new competitors. Increased competition could have
a material adverse effect on our business, results of operations and financial
condition.

WE RELY ON SALES TO TWO MAJOR CUSTOMERS.

     Our sales in 2007 to two customers constituted approximately 43% of our
consolidated revenues. Sales to Fisher & Company accounted for approximately 29%
and 28% of the Company's consolidated revenues in 2007 and 2006, respectively.
Sales to TI Group Automotive Systems Corporation accounted for approximately 14%
and 13% of the Company's consolidated revenues in 2007 and 2006. The loss of any
significant portion of our sales to these customers could have a material
adverse effect on our business, results of operations and financial condition.


                                       4



INCREASES IN OUR RAW MATERIAL COSTS OR DIFFICULTIES WITH OUR SUPPLIERS COULD
NEGATIVELY AFFECT US.

     While we currently maintain alternative sources for raw materials, our
business is subject to the risk of price fluctuations and periodic delays in the
delivery of certain raw materials. In recent years, we have been adversely
impacted by increased costs for steel, our principal raw material, which we have
been unable to wholly mitigate, as well as increases in other materials prices.
Any continued fluctuation in the price or availability of our raw materials
could have a material adverse impact on our business, results of operations and
financial condition.

WE MAY BE ADVERSELY AFFECTED BY LABOR RELATIONS ISSUES.

     Although none of our employees are unionized, the domestic automakers and
many of their suppliers, including many of our customers, have unionized work
forces. Work stoppages or slow-downs experienced by automakers or their
suppliers could result in slow-downs or closures of assembly plants where our
products are included in assembled components. In the event that one or more of
our customers or their customers experiences a material labor relations issue,
our business, results of operations and financial condition could be materially
adversely affected.

WE MAY INCUR LOSSES AS A RESULT OF PRODUCTS LIABILITY, WARRANTY OR OTHER CLAIMS
THAT MAY BE BROUGHT AGAINST US.

     We face risk of exposure to warranty and product liability claims in the
event that our products fail to perform as expected or result, or are alleged to
have resulted, in bodily injury, property damage or other losses. In addition,
if any of our products are or are alleged to be defective, then we may be
required to participate in a product recall. We may also be involved from time
to time in legal proceedings and commercial or contractual disputes. Any losses
or other liabilities related to these exposures could have a material adverse
effect on our business, results of operations and financial condition.

WE COULD BE ADVERSELY IMPACTED BY ENVIRONMENTAL LAWS AND REGULATIONS.

     Our operations are subject to environmental laws and regulations.
Currently, environmental costs and liabilities with respect to our operations
are not material, but there can be no assurance that we will not be adversely
impacted by these costs and liabilities in the future either under present laws
and regulations or those that may be adopted or imposed in the future.

WE COULD BE ADVERSELY IMPACTED BY THE LOSS OF THE SERVICES OF KEY EMPLOYEES.

     Successful operations depend, in part, upon the efforts of executive
officers and other key employees. Our future success will depend, in part, upon
our ability to attract and retain qualified personnel. Loss of the services of
any of our key employees, or the inability to attract or retain employees could
have a material adverse affect upon our business, financial condition and
results of operations.

WE COULD BE ADVERSELY IMPACTED BY OUR FAILURE TO COMPLY WITH SECTION 404 OF THE
SARBANES-OXLEY ACT

     As a public company we are required to comply with the reporting
obligations of the Exchange Act and will be required to comply with Section 404
of the Sarbanes-Oxley Act of 2002. If we fail to comply with the reporting
obligations of the Exchange Act and Section 404 of the Sarbanes-Oxley Act, or if
we fail to achieve and maintain adequate internal controls over financial
reporting, our business, results of operations and financial condition, and
investors' confidence in us, could be materially adversely affected.


                                       5



THE PRICE OF OUR COMMON STOCK IS SUBJECT TO VOLATILITY, AND OUR STOCK IS THINLY
TRADED.

     Various factors, such as general economic changes in the financial markets,
announcements or significant developments with respect to the automotive
industry, actual or anticipated variations in our or our competitors' quarterly
or annual financial results, the introduction of new products or technologies by
us or our competitors, changes in other conditions or trends in our industry or
in the markets of any of our significant customers, changes in governmental
regulation, or changes in securities analysts' estimates of our competitors or
our industry, could cause the market price of our common stock to fluctuate
substantially.

     Our common stock is traded on the American Stock Exchange (not registered,
trading privileges only). The average daily trading volume for our common stock
on the American Stock Exchange is currently less than 2,000 shares per day, and
on some days we have zero volume. As a result, you may have difficulty selling
shares of our common stock, and the price of our common stock may vary
significantly based on trading volume.

ITEM 1B - UNRESOLVED STAFF COMMENTS

     Not applicable.

ITEM 2 - PROPERTIES

     The Company's headquarters is located in Naperville, Illinois. It conducts
its manufacturing and warehousing operations at three additional facilities. All
of these facilities are described below. Each facility is owned by the Company
and considered suitable and adequate for its present use. The Company currently
maintains a small sales and engineering office in Norwell, Massachusetts in a
leased facility. The Company also owns a facility in Jefferson, Iowa, that was
formerly used in the fastener segment.

     Of the properties described below, the Madison Heights, Michigan facility
is used entirely in the fastener segment. The Albia, Iowa facility is used
exclusively in the assembly equipment segment. The Tyrone, Pennsylvania and the
Naperville, Illinois facilites are utilized in both operating segments.

                        Plant Locations and Descriptions


                         
Naperville, Illinois        Brick, concrete block and partial metal construction
                            with metal roof.

Tyrone, Pennsylvania        Concrete block with small tapered beam type
                            warehouse.

Albia, Iowa                 Concrete block with prestressed concrete roof
                            construction.

Madison Heights, Michigan   Concrete, brick and partial metal construction with
                            metal roof.


ITEM 3 - LEGAL PROCEEDINGS

     The Company is, from time to time involved in litigation, including
environmental claims, in the normal course of business. While it is not possible
at this time to establish the ultimate amount of liability with respect to
contingent


                                       6



liabilities, including those related to legal proceedings, management is of the
opinion that the aggregate amount of any such liabilities, for which provision
has not been made, will not have a material adverse effect on the Company's
financial position.

ITEM 4 - SUBMISSION OF MATTERS TO A VOTE OF SECURITY HOLDERS

     No matter was submitted to a vote of the Company's shareholders during the
fourth quarter of 2007.


                                       7



                      Executive Officers of the Registrant

     The names, ages and positions of all executive officers of the Company, as
of March 14, 2008, are listed below. Officers are elected annually by the Board
of Directors at the meeting of the directors immediately following the Annual
Meeting of Shareholders. There are no family relationships among these officers,
nor any arrangement or understanding between any officer and any other person
pursuant to which the officer was selected.



Name and Age of Officer        Position                                           Years an Officer
-----------------------        --------                                           ----------------
                                                                         
John A. Morrissey         72   Chairman, Chief Executive Officer                         27

Michael J. Bourg          45   President, Chief Operating Officer and Treasurer           9

Kimberly A. Kirhofer      49   Secretary                                                 17

Nirendu Dhar              66   General Manager, H & L Tool Company, Inc.                  7


-    Mr. Morrissey has been Chairman of the Board of Directors of the Company
     since November 1979, and Chief Executive Officer since August 1981. He has
     been a director of the Company since 1968.

-    Mr. Bourg has been President, Chief Operating Officer and Treasurer of the
     Company since May 2006. He was Corporate Controller from December 1998 to
     November 2005. He became Vice President - Finance in November 2005 and was
     named Executive Vice President in February 2006. He has been a director of
     the Company since May 2006.

-    Mrs. Kirhofer has been Secretary of the Company since August 1991, and was
     Assistant Secretary of the Company from February 1991 through August 1991.
     Prior to that, she held various administrative positions with the Company
     since May 1983.

-    Mr. Dhar has been employed as General Manager of the Company's subsidiary,
     H & L Tool Company, Inc., since 1996. Mr. Dhar was employed as Plant
     Manager and Chief Engineer of H & L Tool Company, Inc. prior to the
     Company's acquisition of H & L Tool Company, Inc. for more than five years.
     He has been a director of the Company since May 2001. In February 2008, Mr.
     Dhar notified the Company of his intention to retire from his position as
     General Manager of H & L Tool effective as of April 30, 2009. In connection
     with his decision to retire, Mr. Dhar resigned as a director of the Company
     effective as of the 2008 Annual Meeting of Shareholders of the Company.


                                        8



                                     PART II

ITEM 5 - MARKET FOR REGISTRANT'S COMMON EQUITY, RELATED STOCKHOLDER MATTERS AND
ISSUER PURCHASES OF EQUITY SECURITIES

     The Company's common stock is traded on the American Stock Exchange
(trading privileges only, not registered). As of February 15, 2008 there were
approximately 240 shareholders of record of such stock. The information on the
market price of, and dividends paid with respect to, the Company's common stock,
set forth in the section entitled "Information on Company's Common Stock" which
appears on page 12 of the 2007 Annual Report is incorporated herein by
reference. The 2007 Annual Report is filed as an exhibit to this report. See
Item 7 - "Management's Discussion and Analysis of Financial Condition and
Results of Operations - Dividends," for additional information about the
Company's dividend policy.

     Under the terms of a stock repurchase authorization originally approved by
the Board of Directors of the Company in February of 1990, as amended, the
Company is authorized to repurchase up to an aggregate of 200,000 shares of its
common stock, in the open market or in private transactions, at prices deemed
reasonable by management. Cumulative purchases under the repurchase
authorization have amounted to 162,996 shares at an average price of $15.66 per
share. The Company has not purchased any shares of its common stock since 2002.

ITEM 6 - SELECTED FINANCIAL DATA

     As a Smaller Reporting Company as defined in Rule 12b-2 of the Exchange Act
and in item 10(f)(1) of Regulation S-K, we are electing scaled disclosure
reporting obligations with respect to this item and therefore are not required
to provide the information requested by this Item 6.

ITEM 7 - MANAGEMENT'S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS
OF OPERATIONS

FORWARD-LOOKING STATEMENTS

This discussion contains certain "forward-looking statements" which are
inherently subject to risks and uncertainties that may cause actual events to
differ materially from those discussed herein. Factors which may cause such
differences in events include those disclosed above under "Risk Factors" and
elsewhere in this Form 10-K. As stated elsewhere in this filing, such factors
include, among other things: conditions in the domestic automotive industry,
upon which we rely for sales revenue, the intense competition in our markets,
the concentration of our sales to two major customers, the price and
availability of raw materials, labor relations issues, losses related to product
liability, warranty and recall claims, costs relating to environmental laws and
regulations, and the loss of the services of our key employees. Many of these
factors are beyond our ability to control or predict. Readers are cautioned not
to place undue reliance on these forward-looking statements. We undertake no
obligation to publish revised forward-looking statements to reflect events or
circumstances after the date hereof or to reflect the occurrence of
unanticipated events.

RESULTS OF OPERATIONS

     Net income in 2007 was $1.31 per share compared with $1.16 per share in
2006. Although net revenues declined 6.4 percent, from $40,369,977 in 2006 to
$37,776,264 in 2007, lower operating expenses and the absence of significant
plant closing expenses in 2007 helped achieve improved bottom line results.


                                       9



2007 COMPARED TO 2006

     The decline in revenues in 2007 affected both the fastener and assembly
equipment segments. Fastener segment revenues amounted to $33,083,907 during the
year, compared to $34,421,398 in 2006. Throughout the year we experienced
reduced overall demand from our automotive customers as domestic automobile
manufacturers, who are the end users for a large portion of our automotive
customer base, reduced production in response to import brand market share gains
while also attempting to reduce their reliance on less profitable fleet sales.
Increases in sales to certain non-automotive customers during 2007 allowed us to
limit the net fastener segment sales decline to 3.9 percent. The impact of lower
net sales was offset by reductions in certain operating expenses. Tooling
expenses for the year were $163,000 lower than in 2006 due to higher than normal
tooling associated with new parts incurred in 2006. Due to a change in product
mix, as well as investments in equipment during the last year that have expanded
our capabilities, certain machining and parts sorting procedures that were
formerly outsourced are now being performed internally, contributing to a
$571,000 reduction in these outside production costs compared to last year. We
also benefited from the reduction in certain fixed overhead items as fastener
segment depreciation declined $510,323, due to certain equipment becoming fully
depreciated in 2006, and expediting and rejection expenses declined $55,000. The
most notable increase incurred during 2007 related to higher prices for
non-ferrous metals used in some of the parts we manufacture. The transfer of
production activities from Jefferson, Iowa to Tyrone, Pennsylvania that began in
the third quarter of 2006 resulted in expense reductions due to the elimination
of certain costs in the current year. The net decline in operating expenses
during 2007 effectively offset the revenue decline, resulting in an improvement
in the fastener segment gross margin to $5,788,153 compared with $5,583,254
reported in 2006.

     Assembly equipment segment revenues were $4,692,357 in 2007, a decline of
$1,256,222, or 21.1 percent, compared to the $5,948,579 recorded in 2006. Demand
for our products in this segment continues to be weak, and we have taken steps
to reduce and control expenses wherever possible, including reductions in both
staffing levels and work schedules. The cumulative effect of these actions did
not fully offset the effects of reduced volume and, as a result, the assembly
equipment segment gross margin declined to $1,572,312 from $2,257,258 last year.

     Selling and administrative expenses for 2007 were $5,816,802, a decline of
$216,897, or 3.6 percent, compared with 2006. Salaries and related benefits
account for approximately $94,000 of the net decline due to reduced headcount.
Legal fees declined $47,000, primarily due to services in 2006 related to the
Jefferson plant closing. Profit sharing expense declined $24,000 as a result of
lower profits in the current year, after taking the plant closing expenses into
consideration, and sales commissions declined $25,000 due to the lower sales
level in 2007. The balance of the net reduction is made up of a variety of
smaller expense items.

     In May of 2006, the closing of our Jefferson, Iowa fastener operation and
transfer of production activities to our facility in Tyrone, Pennsylvania, was
announced. The move was made to better utilize available manufacturing capacity.
During the fourth quarter of 2006, manufacturing activities in Jefferson
concluded. Total charges of $422,934 were recorded in 2006 related to the plant
closing. During 2007, additional charges of $20,337 were recorded.

DIVIDENDS

     In determining to pay dividends, the Board considers current profitability,
the outlook for longer-term profitability, known and potential cash requirements
and the overall financial condition of the Company. The Company paid four
regular quarterly dividends of $.18 per share during 2007, for a total dividend
distribution of $.72 per share for the year. On February 18, 2008, your Board of
Directors declared a regular quarterly dividend of $.18 per share, payable March
20, 2008 to shareholders


                                       10



of record on March 5, 2008. This continues the uninterrupted record of
consecutive quarterly dividends paid by the Company to its shareholders that
extends over 74 years. At that same meeting, the Board also declared an extra
dividend of $.15 per share to be paid April 18, 2008 to shareholders of record
on April 4, 2008.

PROPERTY, PLANT AND EQUIPMENT

     Total capital expenditures in 2007 were $424,509. Of the total, $390,258
was invested in fastener segment additions, including $123,000 for cold-heading
equipment upgrades, $93,000 for secondary equipment, $61,000 for inspection and
other equipment, and $113,000 for certain buildings and grounds improvements.
Assembly equipment segment additions totaled $34,251, with approximately $25,000
expended for building heating units and the balance for a riveting machine used
for lease purposes.

     Capital expenditures during 2006 totaled $1,451,756, of which $1,374,009
was invested in equipment for our fastener operations. Approximately $680,000
was spent on cold-heading equipment to expand our capabilities to make larger
parts and approximately $233,000 was spent on equipment for performing secondary
operations, such as grinding and shaving of parts. Additionally, approximately
$346,000 was spent on inspection equipment. The remaining additions were for
computer hardware and other equipment not specifically assigned to a single
segment.

     Depreciation expense amounted to $1,136,806 in 2007 and $1,659,834 in 2006.

LIQUIDITY AND CAPITAL RESOURCES

     The Company's working capital increased approximately $1.2 million between
December 31, 2006 and December 31, 2007. The Company's holdings in cash, cash
equivalents and certificates of deposit amounted to approximately $7.5 million
at the end of 2007, an increase of $1.8 million compared with the prior
year-end. The increase was mainly due to a $900,000 reduction in capital outlays
during 2007 compared to 2006 and a $300,000 reduction in income tax payments.
Inventories were reduced by nearly $.5 million in 2007, as stock on hand was
adjusted due to reduced demand. Accounts receivable decreased $.6 million
compared with the prior year-end, primarily due to the lower level of sales
during the year. Accrued expenses declined $.2 million compared to the prior
year, primarily due to the payment of accrued plant closing expenses. The
Company's investing activities in 2007 primarily consisted of capital
expenditures of $.4 million and the net investment in certificates of deposit of
$1.5 million. The only financing activity during 2007 was the payment of $.7
million in dividends. The Company has a $1.0 million line of credit, which
expires May 31, 2008. This line of credit remains unused.

OFF-BALANCE SHEET ARRANGEMENTS

     The Company has not entered into, and has no current plans to enter into,
any off-balance sheet financing arrangements.

     Management believes that current cash, cash equivalents, operating cash
flow and available line of credit will be sufficient to provide adequate working
capital for the foreseeable future.

APPLICATION OF CRITICAL ACCOUNTING POLICIES

     The preparation of financial statements and related disclosures in
conformity with accounting principles generally accepted in the United States of
America requires management to make estimates and assumptions that affect the
reported amounts of assets and liabilities at the date of the financial
statements and the amounts of revenue and expenses during the reporting period.
A summary of critical accounting policies can be found in Note 1 of the
financial statements.


                                       11



NEW ACCOUNTING STANDARDS

     The Company's financial statements and financial condition were not, and
are not expected to be, materially impacted by new, or proposed, accounting
standards. A summary of new accounting pronouncements can be found in Note 1 of
the financial statements.

PERSONNEL

     On February 18, 2008, Nirendu Dhar, General Manager of H & L Tool Company,
Inc. and member of the Company's Board of Directors, notified the Company of his
intention to retire. Mr. Dhar's retirement from his position as General Manager
of H & L Tool will be effective April 30, 2009. In connection with his decision
to retire, Mr. Dhar also resigned from the Board effective as of the 2008 Annual
Meeting of Shareholders of the Company.

OUTLOOK FOR 2008

     We began 2007 on a cautious note as demand from our automotive customers
was expected to be restrained, due to production cuts that began in the second
half of 2006, and was not expected to rebound significantly. This caution was
well founded as 2007 saw further reductions in domestic automobile production.
As we begin 2008, end-users of our products are planning additional production
cuts for the first half of the year due to ongoing restructurings and the
general economic outlook which currently provides for little growth. While we
did achieve greater sales to customers in certain non-automotive markets, which
partially offset our automotive declines, our concentration in the automotive
market resulted in the net decline in fastener segment sales discussed above.

     The assembly equipment segment, which recorded a modest increase in sales
in 2006 on lower unit volume, recorded lower sales in 2007 on a further drop in
volume. The economic data currently available provides no reason to expect any
significant improvement in this segment in the near-term. We will continue to
concentrate on cost controls while pursuing profitable opportunities in this
segment.

     The outlook for 2008 is more challenging than a year ago. With the
possibility of a recession that would likely affect all the markets we serve, we
expect customers will continue to demand higher quality and lower prices as
their operations cope with a difficult economic environment. Our ability to
increase revenues while diversifying our customer base will be significant
factors determining our future success.

     Given the challenging circumstances we face, we will continue our efforts
to increase our sales revenues in all markets by emphasizing value over price
and will focus on more complex products for which our expertise, service and
unsurpassed quality are important factors in our customers' purchasing
decisions. At the same time, we will continue to pursue solutions that help
improve our operations at all levels.

     Our future success is dependent on many factors. We believe that the
valuable contributions of our employees and our sound financial condition will
help us face the challenges ahead in 2008. While many of our customers are
facing the same challenges, we would like to thank them for their loyalty, and
also thank our shareholders for their continued support.

ITEM 7A QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK

     As a Smaller Reporting Company as defined in Rule 12b-2 of the Exchange Act
and in item 10(f)(1) of Regulation S-K, we are electing scaled disclosure
reporting obligations with respect to this item and therefore are not required
to provide the information requested by this Item 7A.


                                       12



ITEM 8 - FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA

     See the sections entitled "Consolidated Financial Statements" and
"Financial Statement Schedule" which appear on pages 17 through 20 of this
report.

ITEM 9 - CHANGES IN AND DISAGREEMENTS WITH ACCOUNTANTS ON ACCOUNTING AND
FINANCIAL DISCLOSURE

     Not applicable.

ITEM 9A - CONTROLS AND PROCEDURES

     (a) Disclosure Controls and Procedures. The Company's management, with the
participation of the Company's Chief Executive Officer and President, Chief
Operating Officer and Treasurer (the Company's principal financial officer), has
evaluated the effectiveness of the Company's disclosure controls and procedures
(as such term is defined in Rules 13a-15(e) and 15d-15(e) under the Securities
Exchange Act of 1934, as amended (the "Exchange Act")) as of the end of the
period covered by this report. Based on such evaluation, the Company's Chief
Executive Officer and Chief Financial Officer have concluded that, as of the end
of such period, the Company's disclosure controls and procedures are effective
in recording, processing, summarizing and reporting, on a timely basis,
information required to be disclosed by the Company in the reports that it files
or submits under the Exchange Act.

Management's Report On Internal Control Over Financial Reporting.

     The Company's management is responsible for establishing and maintaining
adequate internal control over financial reporting, as that term is defined in
Exchange Act Rules 13a-15(f) and 15d-15(f) of the Exchange Act. The Company's
management, with the participation of the Company's Chief Executive Officer and
President, Chief Operating Officer and Treasurer (the Company's principal
financial officer), assessed the effectiveness of the Company's internal control
over financial reporting as of December 31, 2007, based on criteria established
in Internal Control--Integrated Framework, issued by the Committee of Sponsoring
Organizations of the Treadway Commission ("COSO"). Based on this assessment, the
Company's management has concluded that the Company's internal controls over
financial reporting is effective as of December 31, 2007.

     This annual report does not include an attestation report of the Company's
registered public accounting firm regarding internal control over financial
reporting. Management's report was not subject to attestation by the Company's
registered public accounting firm pursuant to temporary rules of the Securities
and Exchange Commission that permit the Company to provide only management's
report in this annual report.

     (b) Internal Control Over Financial Reporting. There have not been any
changes in the Company's internal control over financial reporting (as such term
is defined in Rules 13a-15(f) and 15d-15(f) under the Exchange Act) during the
quarter ended December 31, 2007 that have materially affected, or are reasonably
likely to materially affect, the Company's internal control over financial
reporting.


                                       13



                                    PART III

ITEM 10 - DIRECTORS, EXECUTIVE OFFICERS AND CORPORATE GOVERNANCE

     The information in the Company's 2008 Proxy Statement (i) with respect to
the Board of Directors' nominees for directors that is not related to security
ownership in "Security Ownership of Management" (ii) in the third paragraph in
"Additional Information Concerning the Board of Directors and Committees" and
(iii) in "Section 16(a) Beneficial Ownership Reporting Compliance" is
incorporated herein by reference. The 2008 Proxy Statement is to be filed with
the Securities and Exchange Commission in connection with the Company's 2008
Annual Meeting of Shareholders. The information called for with respect to
executive officers of the Company is included in Part I of this Report on Form
10-K under the caption "Executive Officers of the Registrant."

     The Company has adopted a code of ethics for its principal executive
officer, chief operating officer and senior financial officers. A copy of this
code of ethics was filed as Exhibit 14 to the Company's Annual Report on Form
10-K dated March 29, 2005.

ITEM 11 - EXECUTIVE COMPENSATION

     The information set forth in the Company's 2008 Proxy Statement in
"Compensation of Directors and Executive Officers" is incorporated herein by
reference.

     The Compensation Committee of the Board of Directors currently consists of
Directors Edward L. Chott, William T. Divane, Jr., George P. Lynch and John R.
Madden.

ITEM 12 - SECURITY OWNERSHIP OF CERTAIN BENEFICIAL OWNERS AND MANAGEMENT AND
RELATED STOCKHOLDER MATTERS

     The information set forth in the Company's 2008 Proxy Statement in
"Principal Shareholders" and the information with respect to security ownership
of the Company's directors and officers set forth in "Security Ownership of
Management" is incorporated herein by reference.

     The Company does not have any equity compensation plans or arrangements.

ITEM 13 - CERTAIN RELATIONSHIPS AND RELATED TRANSACTIONS, AND DIRECTOR
INDEPENDENCE

     The information set forth the Company's 2008 Proxy Statement in (i)
"Additional Information Concerning the Board of Directors and Committees -
Policy Regarding Related Person Transactions" and (ii) the first paragraph under
"Additional Information Concerning the Board of Directors and Committees" is
incorporated herein by reference.

ITEM 14 - PRINCIPAL ACCOUNTANT FEES AND SERVICES

     The information set forth in the Company's 2008 Proxy Statement in (i)
"Independent Registered Public Accounting Firm - Fee Table" and (ii) the last
paragraph under "Independent Registered Public Accounting Firm" is incorporated
herein by reference.


                                       14



                                     PART IV

ITEM 15 - EXHIBITS AND FINANCIAL STATEMENT SCHEDULES

     (a)  The following documents are filed as a part of this report:

          1.   Financial Statements:

               See the section entitled "Consolidated Financial Statements"
               which appears on page 17 of this report.

          2.   Financial statement schedule and supplementary information
               required to be submitted:

               See the section entitled "Financial Statement Schedule" which
               appears on pages 18 through 20 of this report.

          3.   Exhibits:

               See the section entitled "Exhibits" which appears on page 21 of
               this report.


                                       15



                                   SIGNATURES

     Pursuant to the requirements of Section 13 or 15(d) of the Securities
Exchange Act of 1934, Chicago Rivet & Machine Co. has duly caused this report to
be signed on its behalf by the undersigned, thereunto duly authorized.

                                        Chicago Rivet & Machine Co.


                                        By /s/ Michael J. Bourg
                                           -------------------------------------
                                        Michael J. Bourg
                                        President and Chief Operating Officer

     Pursuant to the requirements of the Securities Exchange Act of 1934, this
report has been signed below by the following persons on behalf of the
registrant and in the capacities and on the dates indicated:


                                     


/s/ John A. Morrissey                   Chairman of the Board of Directors,
-------------------------------------   Chief Executive Officer (Principal
John A. Morrissey                       Executive Officer) and Member of the
                                        Executive Committee
                                        March 20, 2008


/s/ Michael J. Bourg                    President, Chief Operating Officer,
-------------------------------------   Treasurer (Principal Financial and
Michael J. Bourg                        Accounting Officer), Member of the
                                        Executive Committee and Director
                                        March 20, 2008


/s/ Edward L. Chott                     Director, Member of the Audit Committee
-------------------------------------   March 20, 2008
Edward L. Chott


/s/ Kent H. Cooney                      Director, Member of the Audit Committee
-------------------------------------   March 20, 2008
Kent H. Cooney


/s/ Nirendu Dhar                        Director
-------------------------------------   March 20, 2008
Nirendu Dhar


/s/ William T. Divane, Jr.              Director, Member of the Audit Committee
-------------------------------------   March 20, 2008
William T. Divane


/s/ George P. Lynch                     Director
-------------------------------------   March 20, 2008
George P. Lynch


/s/ John R. Madden                      Director, Member of the Executive
-------------------------------------   Committee and the Audit Committee
John R. Madden                          March 20, 2008


/s/ Walter W. Morrissey                 Director, Member of the Executive Committee
-------------------------------------   March 20, 2008
Walter W. Morrissey



                                       16



                           CHICAGO RIVET & MACHINE CO.

                        CONSOLIDATED FINANCIAL STATEMENTS

     The consolidated financial statements, together with the notes thereto and
the report thereon of Grant Thornton LLP dated March 14, 2008, appearing on
pages 4 to 11 of the accompanying 2007 Annual Report, are incorporated herein by
reference. With the exception of the aforementioned information and the
information incorporated in Items 1, 5 and 8 herein, the 2007 Annual Report is
not to be deemed filed as part of this Form 10-K Annual Report.

Consolidated Financial Statements from 2007 Annual Report (Exhibit 13 hereto):

Consolidated Balance Sheets (page 4 of 2007 Annual Report)

Consolidated Statements of Income (page 5 of 2007 Annual Report)

Consolidated Statements of Retained Earnings (page 5 of 2007 Annual Report)

Consolidated Statements of Cash Flows (page 6 of 2007 Annual Report)

Notes to Consolidated Financial Statements (pages 7, 8, 9, and 10 of 2007 Annual
Report)

Report of Independent Registered Public Accounting Firm (page 11 of 2007 Annual
Report)


                                       17



                          FINANCIAL STATEMENT SCHEDULE

                                  2007 AND 2006

     The following financial statement schedule should be read in conjunction
with the consolidated financial statements and the notes thereto in the 2007
Annual Report. Financial statement schedules not included herein have been
omitted because they are not applicable or the required information is shown in
the consolidated financial statements or notes thereto.



                                                                            Page
                                                                            ----
                                                                         
Financial Statement Schedule:

Valuation and Qualifying Accounts (Schedule II)                              19

Report of Independent Registered Public Accounting Firm on Financial
   Statement Schedule                                                        20



                                       18



                           CHICAGO RIVET & MACHINE CO.
                 SCHEDULE II - VALUATION AND QUALIFYING ACCOUNTS
                 FOR THE YEARS ENDED DECEMBER 31, 2007 AND 2006



                                   Balance at    Additions                   Balance at
                                    Beginning   Charged to                       End
Classification                       of Year     Expenses    Deductions(1)     of Year
--------------                     ----------   ----------   -------------   ----------
                                                                 
2007

Allowance for doubtful accounts,
   returns and allowances           $150,000     $ (7,242)      $ 47,758      $ 95,000
Reserve for inventory
   obsolescence                     $456,000     $334,246       $315,246      $475,000

2006

Allowance for doubtful accounts,
   returns and allowances           $210,000     $ (5,688)      $ 54,312      $150,000
Reserve for inventory
   obsolescence                     $510,000     $220,559       $274,559      $456,000


(1)  Accounts receivable written off are net of recoveries.


                                       19



           Report of Independent Registered Public Accounting Firm on
                          Financial Statement Schedule

To the Board of Directors
of Chicago Rivet & Machine Co.

      We have audited in accordance with the standards of the Public Company
Accounting Oversight Board (United States) the consolidated financial
statements of Chicago Rivet & Machine Co. and subsidiary referred to in our
report dated March 14, 2008, which is included in the 2007 Annual Report to
Shareholders. Our audits of the basic financial statements included the
financial statement schedule listed in the index appearing under Item 15(a)(2),
which is the responsibility of the Company's management. In our opinion, this
financial statement schedule, when considered in relation to the basic
financial statements taken as a whole, presents fairly, in all material
respects, the information set forth therein.

Grant Thornton LLP
Chicago, Illinois
March 14, 2008


                                       20



CHICAGO RIVET & MACHINE CO.

                                    EXHIBITS

                                INDEX TO EXHIBITS



Exhibit
 Number                                                                    Page
-------                                                                  -------
                                                                   
3.1       Articles of Incorporation, as last amended August 18, 1997.
          Incorporated by reference to the Company's report on Form
          10-K, dated March 27, 1998. File number 0000-01227

3.2       Amended and Restated By-Laws, as amended through
          December 28, 2007                                              22 - 46

4.1       Rights Agreement, dated November 22, 1999, between the
          Company and First Chicago Trust Company of New York as
          Rights Agent. Incorporated by reference to the Company's
          report on Form 10-K, dated March 29, 2000. File
          number 0000-01227

13*       Annual Report to Shareholders for the year ended
          December 31, 2007.                                             47 - 60

14        Code of Ethics for Principal Executive and Senior Financial
          Officers. Incorporated by reference to the Company's report
          on Form 10K, dated March 29, 2005. File number 0000-01227

21        Subsidiaries of the Registrant.                                     61

31.1      Certification of Principal Executive Officer Pursuant to
          Rule 13a-14(a) or 15d-14(a) as Adopted Pursuant to Section
          302 of the Sarbanes-Oxley Act of 2002.                              62

31.2      Certification of Principal Financial Officer Pursuant to
          Rule 13a-14(a) or 15d-14(a) as Adopted Pursuant to Section
          302 of the Sarbanes-Oxley Act of 2002.                              63

32.1      Certification of Principal Executive Officer Pursuant to
          18 U.S.C. Section 1350, as Adopted Pursuant to Section 906
          of the Sarbanes-Oxley Act of 2002.                                  64

32.2      Certification of Principal Financial Officer Pursuant to
          18 U.S.C. Section 1350, as Adopted Pursuant to Section 906
          of the Sarbanes-Oxley Act of 2002.                                  65


*    Only the portions of this exhibit which are specifically incorporated
     herein by reference shall be deemed to be filed herewith.


                                       21