10-K
Table of Contents

 

 

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

 

 

FORM 10-K

 

 

 

x ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(D) OF THE SECURITIES EXCHANGE ACT OF 1934

For the fiscal year ended December 31, 2015

OR

 

¨ TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(D) OF THE SECURITIES EXCHANGE ACT OF 1934

Commission file number 000-01227

 

 

CHICAGO RIVET & MACHINE CO.

(Exact name of registrant as specified in its charter)

 

 

 

ILLINOIS   36-0904920
(State of incorporation)  

(I.R.S. Employer

Identification Number)

901 Frontenac Road,

Naperville, Illinois

  60563
(Address of principal executive offices)   (Zip Code)

Registrant’s telephone number, including area code: (630) 357-8500

Securities registered pursuant to Section 12(b) of the Act:

 

Title of Each Class

 

Name of Each Exchange on Which Registered

Common Stock - $1.00 Par Value   NYSE MKT
  (Trading privileges only, not registered)

Securities registered pursuant to Section 12(g) of the Act: None

 

 

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act.    Yes  ¨    No  x

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act.    Yes  ¨    No  x

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.    Yes  x    No  ¨

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§ 232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files).    Yes  x    No  ¨

Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K is not contained herein, and will not be contained, to the best of registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K.  x

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company. See the definitions of “large accelerated filer”, “accelerated filer” and “smaller reporting company” in Rule 12b-2 of the Exchange Act. (Check one):

 

Large accelerated filer   ¨    Accelerated filer   ¨
Non-accelerated filer   ¨  (Do not check if smaller reporting company)    Smaller reporting company   x

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Act).    Yes  ¨    No  x

The aggregate market value of common stock held by non-affiliates of the Company as of June 30, 2015 was $21,996,744.

As of March 16, 2016, there were 966,132 shares of the Company’s common stock outstanding.

Documents Incorporated By Reference

(1) Portions of the Company’s Annual Report to Shareholders for the year ended December 31, 2015 (the “2015 Report”) are incorporated by reference in Parts I and II of this report.

(2) Portions of the Company’s definitive Proxy Statement which is to be filed with the Securities and Exchange Commission in connection with the Company’s 2016 Annual Meeting of Shareholders are incorporated by reference in Part III of this report.

 

 

 


Table of Contents

CHICAGO RIVET & MACHINE CO.

YEAR ENDING DECEMBER 31, 2015

 

Item
No.

       Page
No.
 
Part I   
1.  

Business

     3   
1A.  

Risk Factors

     4   
1B.  

Unresolved Staff Comments

     6   
2.  

Properties

     6   
3.  

Legal Proceedings

     6   
4.  

Mine Safety Disclosures

     6   
Part II   
5.  

Market for Registrant’s Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities

     8   
6.  

Selected Financial Data

     8   
7.  

Management’s Discussion and Analysis of Financial Condition and Results of Operations

     8   
7A.  

Quantitative and Qualitative Disclosures About Market Risk

     11   
8.  

Financial Statements and Supplementary Data

     12   
9.  

Changes in and Disagreements with Accountants on Accounting and Financial Disclosure

     12   
9A.  

Controls and Procedures

     12   
Part III   
10.  

Directors, Executive Officers and Corporate Governance

     13   
11.  

Executive Compensation

     13   
12.  

Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters

     13   
13.  

Certain Relationships and Related Transactions, and Director Independence

     13   
14.  

Principal Accountant Fees and Services

     13   
Part IV   
15.  

Exhibits and Financial Statement Schedules

     14   

 

2


Table of Contents

PART I

ITEM 1 – Business

Chicago Rivet & Machine Co. (the “Company”) was incorporated under the laws of the State of Illinois in December 1927, as successor to the business of Chicago Rivet & Specialty Co. The Company operates in two segments of the fastener industry: fasteners and assembly equipment. The fastener segment consists of the manufacture and sale of rivets, cold-formed fasteners and parts and screw machine products. The assembly equipment segment consists primarily of the manufacture of automatic rivet setting machines, automatic assembly equipment and parts and tools for such machines. For further discussion regarding the Company’s operations and segments, see Note 6 of the financial statements which appears on page 10 of the Company’s 2015 Annual Report to Shareholders. The 2015 Annual Report is filed as an exhibit to this report.

The principal market for the Company’s products is the North American automotive industry. Sales are solicited by employees and by independent sales representatives.

The segments in which the Company operates are characterized by active and substantial competition. No single company dominates the industry. The Company’s competitors include both larger and smaller manufacturers, and segments or divisions of large, diversified companies with substantial financial resources. Principal competitive factors in the market for the Company’s products are price, quality and service.

The Company serves a variety of customers. Revenues are primarily derived from sales to customers involved, directly or indirectly, in the manufacture of automobiles and automotive components. Information concerning backlog of orders is not considered material to the understanding of the Company’s business due to relatively short production cycles. The level of business activity for the Company is closely related to the overall level of industrial activity in the United States. During 2015, sales to two customers exceeded 10% of the Company’s consolidated revenues. Sales to TI Group Automotive Systems, LLC accounted for approximately 21% and 20% of the Company’s consolidated revenues in 2015 and 2014, respectively. Sales to Fisher & Company accounted for approximately 12% and 13% of the Company’s consolidated revenues in 2015 and 2014, respectively.

The Company’s business has historically been stronger during the first half of the year.

The Company purchases raw material from a number of sources, primarily within the United States. There are numerous sources of raw material, and the Company does not have to rely on a single source for any of its requirements.

Patents, trademarks, licenses, franchises and concessions are not of significant importance to the business of the Company.

The Company does not engage in significant research activities, but rather in ongoing product improvement and development. The amounts spent on product development activities in the last two years were not material.

At December 31, 2015, the Company employed 234 people.

The Company has no foreign operations, and sales to foreign customers represent less than 10% of the Company’s total sales.

 

3


Table of Contents

ITEM 1A – Risk Factors

Our business is subject to a number of risks and uncertainties. If any of the events contemplated by the following risks actually occur, then our business, financial condition or results of operations could be materially adversely affected. Additional risks and uncertainties not currently known to us or that we currently deem to be immaterial may also materially and adversely affect our business, financial condition and results of operations.

We are dependent on the domestic automotive industry.

Demand for our products is directly related to conditions in the domestic automotive industry, which is highly cyclical and is affected by a variety of factors, including regulatory requirements, international trade policies, and consumer spending and preferences. The domestic automotive industry is characterized by fierce competition, and has undergone major restructuring in recent years in response to overcapacity, narrowing profit margins, significant pension and health care liabilities and excess debt. Conditions in the domestic automotive industry declined significantly during 2008, and worsened further in 2009 as the global recession took hold, resulting in a substantial decline in vehicle sales. Overall, automotive production in the United States declined approximately 50 percent between 2000 and 2009, before rebounding in 2010. Although automotive production and sales have increased in 2010 through 2015, any decline in the domestic automotive industry could have a material adverse effect on our business, results of operations and financial condition.

We face intense competition.

We compete with a number of other manufacturers and distributors that produce and sell products similar to ours. Price, quality and service are the primary elements of competition. Our competitors include a large number of independent domestic and international suppliers. We are not as large as a number of these companies and do not have as many financial or other resources. The competitive environment has also changed dramatically over the past several years as our customers, faced with intense international competition and pressure to reduce costs, have expanded their worldwide sourcing of components. As a result, we have experienced competition from suppliers in other parts of the world that enjoy economic advantages, such as lower labor costs, lower health care costs and fewer regulatory burdens. There can be no assurance that we will be able to compete successfully with existing or new competitors. Increased competition could have a material adverse effect on our business, results of operations and financial condition.

We rely on sales to two major customers.

Our sales to two customers constituted approximately 33% of our consolidated revenues in 2015 and 2014. Sales to TI Group Automotive Systems, LLC accounted for approximately 21% and 20% of the Company’s consolidated revenues in 2015 and 2014, respectively. Sales to Fisher & Company accounted for approximately 12% and 13% of the Company’s consolidated revenues in 2015 and 2014, respectively. The loss of any significant portion of our sales to these customers could have a material adverse effect on our business, results of operations and financial condition.

We are subject to risks related to export sales.

Our export sales have increased in recent years, and we are working to continue to expand our business relationships with customers outside of the United States. Export sales are subject to various risks, including risks related to changes in local economic, social and political conditions (particularly in emerging markets) and foreign currency exchange rate fluctuations, which could have a material adverse effect on our business, results of operations and financial condition.

 

4


Table of Contents

Increases in our raw material costs or difficulties with our suppliers could negatively affect us.

While we currently maintain alternative sources for raw materials, our business is subject to the risk of price fluctuations and periodic delays in the delivery of certain raw materials. At various times in recent years, we have been adversely impacted by increased costs for steel, our principal raw material, which we have been unable to wholly mitigate, as well as increases in other materials prices. Any continued fluctuation in the price or availability of our raw materials could have a material adverse impact on our business, results of operations and financial condition.

We may be adversely affected by labor relations issues.

Although none of our employees are unionized, the domestic automakers and many of their suppliers, including many of our customers, have unionized work forces. Work stoppages or slow-downs experienced by automakers or their suppliers could result in slow-downs or closures of assembly plants where our products are included in assembled components. In the event that one or more of our customers or their customers experiences a material labor relations issue, our business, results of operations and financial condition could be materially adversely affected.

We may incur losses as a result of product liability, warranty or other claims that may be brought against us.

We face risk of exposure to warranty and product liability claims in the event that our products fail to perform as expected or result, or are alleged to have resulted, in bodily injury, property damage or other losses. In addition, if any of our products are or are alleged to be defective, then we may be required to participate in a product recall. We may also be involved from time to time in legal proceedings and commercial or contractual disputes. Any losses or other liabilities related to these exposures could have a material adverse effect on our business, results of operations and financial condition.

We could be adversely impacted by environmental laws and regulations.

Our operations are subject to environmental laws and regulations. Currently, environmental costs and liabilities with respect to our operations are not material, but there can be no assurance that we will not be adversely impacted by these costs and liabilities in the future either under present laws and regulations or those that may be adopted or imposed in the future.

We could be adversely impacted by the loss of the services of key employees.

Successful operations depend, in part, upon the efforts of executive officers and other key employees. Our future success will depend, in part, upon our ability to attract and retain qualified personnel. Loss of the services of any of our key employees, or the inability to attract or retain employees could have a material adverse affect upon our business, financial condition and results of operations.

The price of our common stock is subject to volatility, and our stock is thinly traded.

Various factors, such as general economic changes in the financial markets, announcements or significant developments with respect to the automotive industry, actual or anticipated variations in our or our competitors’ quarterly or annual financial results, the introduction of new products or technologies by us or our

 

5


Table of Contents

competitors, changes in other conditions or trends in our industry or in the markets of any of our significant customers, changes in governmental regulation, or changes in securities analysts’ estimates of our competitors or our industry, could cause the market price of our common stock to fluctuate substantially.

Our common stock is traded on the NYSE MKT (not registered, trading privileges only). The average daily trading volume for our common stock during 2015 was less than 7,500 shares per day. As a result, you may have difficulty selling shares of our common stock, and the price of our common stock may vary significantly based on trading volume.

ITEM 1B – Unresolved Staff Comments

None.

ITEM 2 – Properties

The Company’s headquarters is located in Naperville, Illinois. It conducts its manufacturing and warehousing operations at three additional facilities. All of these facilities are described below. Each facility is owned by the Company and considered suitable and adequate for its present use. The Company also maintains a small sales and engineering office in Pembroke, Massachusetts in a leased office.

Of the properties described below, the Madison Heights, Michigan facility is used entirely in the fastener segment. The Albia, Iowa facility is used exclusively in the assembly equipment segment. The Tyrone, Pennsylvania and the Naperville, Illinois facilities are utilized in both operating segments.

Plant Locations and Descriptions

 

Naperville, Illinois

Brick, concrete block and partial metal construction with metal roof.

 

Tyrone, Pennsylvania

Concrete block with small tapered beam type warehouse.

 

Albia, Iowa

Concrete block with prestressed concrete roof construction.

 

Madison Heights, Michigan

Concrete, brick and partial metal construction with metal roof.

ITEM 3 – Legal Proceedings

The Company is, from time to time involved in litigation, including environmental claims, in the normal course of business. While it is not possible at this time to establish the ultimate amount of liability with respect to contingent liabilities, including those related to legal proceedings, management is of the opinion that the aggregate amount of any such liabilities, for which provision has not been made, will not have a material adverse effect on the Company’s financial position.

ITEM 4 – Mine Safety Disclosures

Not applicable.

 

6


Table of Contents

Executive Officers of the Registrant

The names, ages and positions of all executive officers of the Company, as of March 16, 2016, are listed below. Officers are elected annually by the Board of Directors at the meeting of the directors immediately following the Annual Meeting of Shareholders. There are no family relationships among these officers, nor any arrangement or understanding between any officer and any other person pursuant to which the officer was selected.

 

Name and Age of Officer

            

Position

   Years an Officer

John A. Morrissey

       80         Chairman, Chief Executive Officer        35  

Michael J. Bourg

       53         President, Chief Operating Officer and Treasurer        17  

 

  Mr. Morrissey has been Chairman of the Board of Directors of the Company since November 1979, and Chief Executive Officer since August 1981. He has been a director of the Company since 1968.

 

  Mr. Bourg has been President, Chief Operating Officer and Treasurer of the Company since May 2006. Prior to that, he served in various executive roles since joining the Company in December 1998. He has been a director of the Company since May 2006.

 

7


Table of Contents

PART II

ITEM 5 – Market for Registrant’s Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities

The Company’s common stock is traded on the NYSE MKT (trading privileges only, not registered). As of March 4, 2016 there were approximately 160 shareholders of record of such stock. The information on the market price of, and dividends paid with respect to, the Company’s common stock, set forth in the section entitled “Information on Company’s Common Stock” which appears on page 12 of the 2015 Annual Report is incorporated herein by reference. The 2015 Annual Report is filed as an exhibit to this report. See Item 7 – “Management’s Discussion and Analysis of Financial Condition and Results of Operations – Dividends,” for additional information about the Company’s dividend policy.

Under the terms of a stock repurchase authorization originally approved by the Board of Directors of the Company in February of 1990, as amended, the Company is authorized to repurchase up to an aggregate of 200,000 shares of its common stock, in the open market or in private transactions, at prices deemed reasonable by management. Cumulative purchases under the repurchase authorization have amounted to 162,996 shares at an average price of $15.66 per share. The Company has not purchased any shares of its common stock since 2002.

ITEM 6 – Selected Financial Data

As a Smaller Reporting Company as defined in Rule 12b-2 of the Exchange Act and in item 10(f)(1) of Regulation S-K, we have elected scaled disclosure reporting obligations with respect to this item and therefore are not required to provide the information requested by this Item 6.

ITEM 7 – Management’s Discussion and Analysis of Financial Condition and Results of Operations

Forward-Looking Statements

This discussion contains certain “forward-looking statements” which are inherently subject to risks and uncertainties that may cause actual events to differ materially from those discussed herein. Factors which may cause such differences in events include those disclosed above under “Risk Factors” and elsewhere in this Form 10-K. As stated elsewhere in this filing, such factors include, among other things: conditions in the domestic automotive industry, upon which we rely for sales revenue, the intense competition in our markets, the concentration of our sales to two major customers, risks related to export sales, the price and availability of raw materials, labor relations issues, losses related to product liability, warranty and recall claims, costs relating to environmental laws and regulations, and the loss of the services of our key employees. Many of these factors are beyond our ability to control or predict. Readers are cautioned not to place undue reliance on these forward-looking statements. We undertake no obligation to publish revised forward-looking statements to reflect events or circumstances after the date hereof or to reflect the occurrence of unanticipated events.

RESULTS OF OPERATIONS

Financial results for 2015 were positive, though mixed, with an 18.7% increase in assembly equipment segment revenues offset by a 4.5% decline in the larger fastener segment. The strength in assembly equipment segment sales was evident in

 

8


Table of Contents

all major product categories, while the decline in the fastener segment sales was primarily due to lower export sales and the transition period where certain parts reached the end of their normal production life before newer parts started shipping in full production quantities. Overall, net sales in 2015 were $36,174,604 compared to $37,135,207 in 2014, a decline of 2.6%. Net income for 2015 was $1,687,641, or $1.75 per share, compared to $1,951,889, or $2.02 per share, in 2014.

2015 Compared to 2014

Fastener segment revenues were $7,759,833 in the fourth quarter of 2015, a decline of $208,203, or 2.6%, from $7,968,036 in the fourth quarter of 2014. Fastener segment sales for the full year were $32,590,015 in 2015, compared with $34,116,301 in 2014, a decline of $1,526,286, or 4.5%. This breaks a string of five consecutive years of fastener segment sales growth. Our fastener segment, which relies on the automotive sector for the majority of its revenues, was supported by another year of growth in domestic automobile and light truck sales, however, our sales to certain export markets experienced significant declines. Shipments to China were down approximately $700,000 as their economy went through a significant slowdown in 2015. Also contributing to the decline in sales were certain automotive parts that reached the end of their regular production lives during the year. The decrease in net sales was the primary factor contributing to lower fastener segment margins during 2015. Although we experienced favorable raw material prices during the year and reduced our tooling expense by $396,000, the lower production volume negatively impacted our labor efficiency while our health insurance expense increased approximately $101,000 during the year, resulting in a net reduction in gross margin for the fastener segment of $98,106 in the fourth quarter of 2015 and $651,598 for the full year of 2015 compared to 2014.

Assembly equipment segment revenues were $906,534 in the fourth quarter of 2015, an increase of $186,290, or 25.9%, compared to the fourth quarter of 2014, when revenues were $720,244. For the full year, 2015 assembly equipment segment revenues were $3,584,589, an increase of $565,683, or 18.7%, compared to $3,018,906 reported in 2014. The increase in fourth quarter and full year sales was the result of an increase in the number of machines shipped compared to the year earlier periods and an increase in the sale of tools and machine parts. The increase in sales in the fourth quarter and the full year resulted in an improvement in segment margins of $25,015 and $241,910, respectively.

Selling and administrative expenses were $5,408,281 in 2015, a decrease of $31,274, or 0.6%, compared to the 2014 total of $5,439,555. The change is primarily due to a reduction in profit sharing expense of $40,917, related to lower operating profit. As a percentage of net sales, selling and administrative expenses were 15% in 2015 compared to 14.6% in 2014.

Other income was $44,443 in 2015 compared to $41,280 in 2014. Both interest income and other miscellaneous income increased slightly in 2015 compared to the prior year.

The Company’s effective income tax rates were 33.3% and 32.9% in 2015 and 2014, respectively. Rates were lower than the U.S. federal statutory rate primarily due to the Domestic Production Activities Deduction allowed under Internal Revenue Code Section 199.

DIVIDENDS

In determining to pay dividends, the Board considers current profitability, the outlook for longer-term profitability, known and potential cash requirements and the overall financial condition of the Company. The Company paid four regular quarterly dividends totaling $.72 per share during 2015. In addition, an extra dividend of

 

9


Table of Contents

$.25 per share was paid during the first quarter, bringing the total distribution for the year to $.97 per share. On February 15, 2016, the Board of Directors declared a regular quarterly dividend of $.18 per share, payable March 18, 2016 to shareholders of record on March 4, 2016. This continues the uninterrupted record of consecutive quarterly dividends paid by the Company to its shareholders that extends over 82 years. At that same meeting, the Board also declared an extra dividend of $.25 per share payable March 18, 2016 to shareholders of record on March 4, 2016.

PROPERTY, PLANT AND EQUIPMENT

Capital expenditures during 2015 totaled $2,104,267, of which $1,545,533 related to investments in our fastener operations. The expansion of our H & L Tool manufacturing plant, undertaken to increase capacity and improve production efficiency, totaled $696,246. Cold heading and screw machine equipment comprised $416,268 of the fastener segment additions, $333,395 was expended for equipment used in performing secondary operations on parts and quality control and the remaining $99,624 relates to general plant equipment. Assembly equipment segment additions totaled $455,139, primarily for the installation of a new state-of-the-art horizontal machining center. Additional investments of $103,595 for technology upgrades and building improvements were made in 2015 that benefit both operating segments.

Total capital expenditures in 2014 were $1,735,041. Fastener segment additions accounted for $1,667,248 of the total, including $801,139 for cold heading and screw machine equipment and $201,901 for secondary processing equipment. Inspection equipment comprised $325,133 of the fastener segment additions, while the remaining additions of $339,075 were for various general plant equipment and facilities improvements. Assembly equipment segment additions in 2014 were $42,411, for production equipment. Investments for the benefit of both operating segments, primarily for building improvements, totaled $25,382 during 2014.

Depreciation expense amounted to $1,261,446 in 2015 and $1,262,725 in 2014.

LIQUIDITY AND CAPITAL RESOURCES

Working capital at December 31, 2015 was approximately $16.1 million, an increase of $.1 million from the beginning of the year. Contributing to the change was a $.6 million reduction in inventory which was only partially offset by a $.4 million increase in unearned revenue. The Company’s holdings in cash, cash equivalents and certificates of deposit amounted to $7.4 million at the end of 2015, an increase of $1.1 million. The Company’s investing activities in 2015 consisted primarily of capital expenditures of $2.1 million. The only financing activity during 2015 was the payment of $.9 million in dividends.

Management believes that current cash, cash equivalents and operating cash flow will be sufficient to provide adequate working capital for the next twelve months.

Off-Balance Sheet Arrangements

The Company has not entered into, and has no current plans to enter into, any off-balance sheet financing arrangements.

APPLICATION OF CRITICAL ACCOUNTING POLICIES

The preparation of financial statements and related disclosures in conformity with accounting principles generally accepted in the United States of America requires management to make estimates and assumptions that affect the reported amounts of assets and liabilities at the date of the financial statements and the amounts of revenue and expenses during the reporting period. A summary of critical accounting policies can be found in Note 1 of the financial statements.

 

10


Table of Contents

NEW ACCOUNTING STANDARDS

The Company’s financial statements and financial condition were not, and are not expected to be, materially impacted by new, or proposed, accounting standards. A summary of recent accounting pronouncements can be found in Note 1 of the financial statements.

OUTLOOK FOR 2016

U.S. auto and light truck sales are forecast to remain at record levels in 2016 due to the improving job market, favorable financing rates and lower gasoline prices. This is favorable to our fastener segment, as the majority of that segment’s revenue comes from the automotive sector. However, there is expected to be continuing weakness in certain foreign markets we serve.

The near-term outlook for our assembly equipment segment remains favorable based on current order backlog, but a cautious sentiment for capital expenditures is a concern in looking at the second half of the year as the overall economy is expected to continue the tepid growth rate of recent years.

During the past year, we benefited from declining commodity prices and lower fuel costs, but along with lower volume, increases in certain other expenses, especially health insurance, partially offset these lower costs and resulted in fractionally lower margins overall. Increased costs can be difficult to recover in our market, as many of our customers expect prices to be held constant over the life of a part. As in the past, we will continue our efforts to improve operational efficiency as a means to improve margins.

Our profitable results in recent years have allowed us to consistently make investments in our operations which we consider necessary to remain competitive. Over the last five years, we have invested $10.1 million on such upgrades. The investments we made in 2015 in our facilities and equipment have expanded our production capacity and should result in more efficient operations. We believe these investments are necessary to allow us to take advantage of opportunities that may improve revenue and profitability in the future. In the upcoming year, we will continue to make investments designed to further improve operations. We will continue our efforts to foster new customer relationships and build on existing ones in all the markets we serve by emphasizing value over price and by focusing our efforts on producing more complex parts for which our expertise, quality and customer service are important factors in purchasing decisions.

The positive results in the past year would not have been possible without the dedicated efforts of our employees, who consistently work to meet the daily challenges of today’s manufacturing environment. We are grateful for their contributions as well as the loyalty of our customers, who have placed their confidence in us to help them achieve their goals. We also take this opportunity to acknowledge our shareholders for their support.

ITEM 7A Quantitative and Qualitative Disclosures About Market Risk

As a Smaller Reporting Company as defined in Rule 12b-2 of the Exchange Act and in item 10(f)(1) of Regulation S-K, we are electing scaled disclosure reporting obligations with respect to this item and therefore are not required to provide the information requested by this Item 7A.

 

11


Table of Contents

ITEM 8 – Financial Statements and Supplementary Data

See the section entitled “Consolidated Financial Statements” which appears on page 16 of this report.

ITEM 9 – Changes in and Disagreements with Accountants on Accounting and Financial Disclosure

None.

ITEM 9A – Controls and Procedures

Disclosure Controls and Procedures.

The Company’s management, with the participation of the Company’s Chief Executive Officer and President, Chief Operating Officer and Treasurer (the Company’s principal financial officer), has evaluated the effectiveness of the Company’s disclosure controls and procedures (as such term is defined in Rules 13a-15(e) and 15d-15(e) under the Securities Exchange Act of 1934, as amended (the “Exchange Act”)) as of the end of the period covered by this report. Based on such evaluation, the Company’s Chief Executive Officer and Chief Financial Officer have concluded that, as of the end of such period, the Company’s disclosure controls and procedures are effective in recording, processing, summarizing and reporting, on a timely basis, information required to be disclosed by the Company in the reports that it files or submits under the Exchange Act.

Management’s Report on Internal Control Over Financial Reporting.

The Company’s management is responsible for establishing and maintaining adequate internal control over financial reporting, as that term is defined in Exchange Act Rules 13a-15(f) and 15d-15(f). The Company’s management, with the participation of the Company’s Chief Executive Officer and President, Chief Operating Officer and Treasurer (the Company’s principal financial officer), assessed the effectiveness of the Company’s internal control over financial reporting as of December 31, 2015, based on the 2013 criteria established in Internal Control – Integrated Framework, issued by the Committee of Sponsoring Organizations of the Treadway Commission (“COSO”). Based on this assessment, the Company’s management has concluded that the Company’s internal controls over financial reporting are effective as of December 31, 2015.

Management’s assessment of internal control has not been audited, as the attestation report requirement for non-accelerated filers was permanently removed from the Sarbanes-Oxley Act by Section 989C of the Dodd-Frank Act as adopted by the SEC.

Changes in Internal Control Over Financial Reporting.

There have not been any changes in the Company’s internal control over financial reporting (as such term is defined in Rules 13a-15(f) and 15d-15(f) under the Exchange Act) during the quarter ended December 31, 2015 that have materially affected, or are reasonably likely to materially affect, the Company’s internal control over financial reporting.

 

12


Table of Contents

PART III

ITEM 10 – Directors, Executive Officers and Corporate Governance

The information in the Company’s 2016 Proxy Statement (i) with respect to the Board of Directors’ nominees for directors that is not related to security ownership in “Security Ownership of Management” (ii) in the third paragraph in “Additional Information Concerning the Board of Directors and Committees” and (iii) in “Section 16(a) Beneficial Ownership Reporting Compliance” is incorporated herein by reference. The 2016 Proxy Statement is to be filed with the Securities and Exchange Commission in connection with the Company’s 2016 Annual Meeting of Shareholders. The information called for with respect to executive officers of the Company is included in Part I of this Report on Form 10-K under the caption “Executive Officers of the Registrant.”

The Company has adopted a code of ethics for its principal executive officer, chief operating officer and senior financial officers. A copy of this code of ethics was filed as Exhibit 14 to the Company’s Annual Report on Form 10-K dated March 29, 2005.

ITEM 11 – Executive Compensation

The information set forth in the Company’s 2016 Proxy Statement in “Compensation of Directors and Executive Officers” is incorporated herein by reference.

The Compensation Committee of the Board of Directors currently consists of Directors Edward L. Chott and William T. Divane, Jr.

ITEM 12 – Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters

The information set forth in the Company’s 2016 Proxy Statement in “Principal Shareholders” and the information with respect to security ownership of the Company’s directors and officers set forth in “Security Ownership of Management” is incorporated herein by reference.

The Company does not have any equity compensation plans or arrangements.

ITEM 13 – Certain Relationships and Related Transactions, and Director Independence

The information set forth in the Company’s 2016 Proxy Statement in (i) “Additional Information Concerning the Board of Directors and Committees – Policy Regarding Related Person Transactions” and (ii) the first paragraph under “Additional Information Concerning the Board of Directors and Committees” is incorporated herein by reference.

ITEM 14 – Principal Accountant Fees and Services

The information set forth in the Company’s 2016 Proxy Statement in “Ratification of Selection of Independent Auditor – Audit and Non-Audit Fees” is incorporated herein by reference.

 

13


Table of Contents

PART IV

ITEM 15 – Exhibits and Financial Statement Schedules

 

  (a) The following documents are filed as a part of this report:

 

  1. Financial Statements:

See the section entitled “Consolidated Financial Statements” which appears on page 16 of this report.

 

  2. Financial Statement Schedules:

Financial statement schedules and supplementary information has been omitted because they are not applicable or the required information is shown in the consolidated financial statements or notes thereto.

 

  3. Exhibits:

See the section entitled “Exhibits” which appears on page 17 of this report.

 

14


Table of Contents

SIGNATURES

Pursuant to the requirements of Section 13 or 15(d) of the Securities Exchange Act of 1934, Chicago Rivet & Machine Co. has duly caused this report to be signed on its behalf by the undersigned, thereunto duly authorized.

 

Chicago Rivet & Machine Co.
By   /s/Michael J. Bourg
Michael J. Bourg
President and Chief Operating Officer

Pursuant to the requirements of the Securities Exchange Act of 1934, this report has been signed below by the following persons on behalf of the registrant and in the capacities and on the dates indicated:

 

/s/John A. Morrissey

John A. Morrissey

  

Chairman of the Board of Directors, Chief Executive Officer (Principal Executive Officer) and Member of the Executive Committee

March 21, 2016

/s/Michael J. Bourg

Michael J. Bourg

  

President, Chief Operating Officer, Treasurer (Principal Financial and Accounting Officer), Director and Member of the Executive Committee

March 21, 2016

/s/Edward L. Chott

Edward L. Chott

  

Director, Member of the Audit Committee

March 21, 2016

/s/Kent H. Cooney

Kent H. Cooney

  

Director, Member of the Audit Committee

March 21, 2016

/s/William T. Divane, Jr.

William T. Divane

  

Director, Member of the Audit Committee

March 21, 2016

/s/Walter W. Morrissey

Walter W. Morrissey

  

Director, Member of the Executive Committee

March 21, 2016

/s/John L. Showel

John L. Showel

  

Director

March 21, 2016

 

15


Table of Contents

CHICAGO RIVET & MACHINE CO.

CONSOLIDATED FINANCIAL STATEMENTS

The consolidated financial statements, together with the notes thereto and the report thereon of Crowe Horwath LLP dated March 21, 2016, appearing on pages 4 to 11 of the accompanying 2015 Annual Report, are incorporated herein by reference. With the exception of the aforementioned information and the information incorporated in Items 1, 5 and 8 herein, the 2015 Annual Report is not to be deemed filed as part of this Form 10-K Annual Report.

Consolidated Financial Statements from 2015 Annual Report (Exhibit 13 hereto):

Consolidated Balance Sheets (page 4 of 2015 Annual Report)

Consolidated Statements of Income (page 5 of 2015 Annual Report)

Consolidated Statements of Retained Earnings (page 5 of 2015 Annual Report)

Consolidated Statements of Cash Flows (page 6 of 2015 Annual Report)

Notes to Consolidated Financial Statements (pages 7, 8, 9, and 10 of 2015 Annual Report)

Report of Independent Registered Public Accounting Firm (page 11 of 2015 Annual Report)

 

16


Table of Contents

CHICAGO RIVET & MACHINE CO.

EXHIBITS

 

Exhibit
Number

    
    3.1    Articles of Incorporation, as last amended August 18, 1997. Incorporated by reference to the Company’s report on Form 10-K, dated March 27, 1998. File number 0000-01227
    3.2    Amended and Restated By-Laws, as amended through February 15, 2016.
  13*    Annual Report to Shareholders for the year ended December 31, 2015.
  14    Code of Ethics for Principal Executive and Senior Financial Officers. Incorporated by reference to the Company’s report on Form 10K, dated March 29, 2005. File number 0000-01227
  21    Subsidiaries of the Registrant.
  31.1    Certification of Principal Executive Officer Pursuant to Rule 13a-14(a) or 15d-14(a) as Adopted Pursuant to Section 302 of the Sarbanes-Oxley Act of 2002.
  31.2    Certification of Principal Financial Officer Pursuant to Rule 13a-14(a) or 15d-14(a) as Adopted Pursuant to Section 302 of the Sarbanes-Oxley Act of 2002.
  32.1    Certification of Principal Executive Officer Pursuant to 18 U.S.C. Section 1350, as Adopted Pursuant to Section 906 of the Sarbanes-Oxley Act of 2002.
  32.2    Certification of Principal Financial Officer Pursuant to 18 U.S.C. Section 1350, as Adopted Pursuant to Section 906 of the Sarbanes-Oxley Act of 2002.
101    Interactive Data File. Includes the following financial and related information from Chicago Rivet & Machine Co.’s Annual Report on Form 10-K for the year ended December 31, 2015 formatted in Extensible Business Reporting Language (XBRL):(1) Consolidated Balance Sheets, (2) Consolidated Statements of Income, (3) Consolidated Statements of Retained Earnings, (4) Consolidated Statements of Cash Flows, and (5) Notes to Consolidated Financial Statements.

 

* Only the portions of this exhibit which are specifically incorporated herein by reference shall be deemed to be filed herewith.

 

17