Form 10-K
Table of Contents

 

 

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

WASHINGTON, D.C. 20549

 

 

FORM 10-K

 

 

 

x ANNUAL REPORT PURSUANT TO SECTION 13 or 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the fiscal year ended December 31, 2010

or

 

¨ TRANSITION REPORT PURSUANT TO SECTION 13 or 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the transition period from                      to                     

Commission File Number: 000-30269

 

 

PIXELWORKS, INC.

(Exact name of registrant as specified in its charter)

 

 

 

Oregon   91-1761992

(State or other jurisdiction of

incorporation or organization)

 

(I.R.S. Employer

Identification No.)

224 Airport Parkway, Suite 400, San Jose, CA   95110
(Address of principal executive offices)   (Zip Code)

408-200-9200

(Registrant’s telephone number, including area code)

Securities registered pursuant to Section 12(b) of the Act:

 

Title of each class

 

Name of each exchange on which registered

Common Stock   NASDAQ Global Market

Securities registered pursuant to Section 12(g) of the Act:

None

 

 

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act.    Yes  ¨    No  x

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or 15(d) of the Act.     Yes  ¨    No  x

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or Section 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.    Yes  x    No  ¨

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§ 232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files).    Yes  ¨    No  ¨

Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K (§229.405 of this chapter) is not contained herein, and will not be contained, to the best of the registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K.    ¨

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer or a smaller reporting company. See definitions of “large accelerated filer,” “accelerated filer,” and “smaller reporting company” in Rule 12b-2 of the Exchange Act.

 

Large accelerated filer   ¨    Accelerated filer   ¨
Non-accelerated filer   ¨    Smaller reporting company   x

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Act).    Yes  ¨    No  x

Aggregate market value of voting Common Stock held by non-affiliates of the registrant at June 30, 2010: $32,875,160. For purposes of this calculation, executive officers and directors are considered affiliates.

Number of shares of Common Stock outstanding as of February 28, 2011: 13,630,558.

 

 

Documents Incorporated by Reference

Part III incorporates information by reference to the registrant’s definitive proxy statement, to be filed with the Securities and Exchange Commission within 120 days after the close of the fiscal year ended December 31, 2010.

 

 

 


Table of Contents

PIXELWORKS, INC.

FORM 10-K

FOR THE YEAR ENDED DECEMBER 31, 2010

TABLE OF CONTENTS

 

PART I

Item 1.

   Business.    4

Item 1A.

   Risk Factors.    12

Item 1B.

   Unresolved Staff Comments.    26

Item 2.

   Properties.    26

Item 3.

   Legal Proceedings.    26

Item 4.

   (Removed and Reserved).    26
PART II

Item 5.

   Market for Registrant’s Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities.    27

Item 6.

   Selected Financial Data.    29

Item 7.

   Management’s Discussion and Analysis of Financial Condition and Results of Operation.    30

Item 7A.

   Quantitative and Qualitative Disclosures About Market Risk.    41

Item 8.

   Financial Statements and Supplementary Data.   

41

Item 9.

   Changes in and Disagreements With Accountants on Accounting and Financial Disclosure.   

68

Item 9A.

   Controls and Procedures.   

68

Item 9B.

   Other Information.   

71

PART III

Item 10.

   Director, Executive Officers and Corporate Governance.   

71

Item 11.

   Executive Compensation.   

71

Item 12.

   Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters.   

71

Item 13.

   Certain Relationships and Related Transactions, and Director Independence.   

71

Item 14.

   Principal Accounting Fees and Services.   

71

PART IV

Item 15.

   Exhibits, Financial Statement Schedules.   

71

SIGNATURES


Table of Contents

Forward-looking Statements

This Annual Report on Form 10-K, including Management’s Discussion and Analysis of Financial Condition and Results of Operation in Part II, Item 7, contains “forward-looking statements” that are based on current expectations, estimates, beliefs, assumptions and projections about our business. Words such as “expects,” “anticipates,” “intends,” “plans,” “believes,” “seeks,” “estimates” and variations of such words and similar expressions are intended to identify such forward-looking statements. These statements are not guarantees of future performance and involve numerous risks, uncertainties and assumptions that are difficult to predict. Actual results could vary materially from those contained in forward looking statements due to many factors, including, without limitation: our ability to deliver new products in a timely fashion; our new product yield rates; changes in estimated product costs; product mix; supply of products from third-party foundries; failure or difficulty in achieving design wins; timely customer transition to new product designs; competitive factors, such as rival chip architectures, introduction or traction by competing designs, or pricing pressures; the success of our products in expanded markets; current global economic challenges; levels of inventory at distributors and customers; changes in the digital display and projection markets; changes in customer ordering patterns or lead times; seasonality in the consumer electronics market; our efforts to achieve profitability from operations; insufficient, excess or obsolete inventory and variations in inventory valuation; litigation related to our intellectual property rights; our lower cash position as a result of our prior and any future debt repurchases, and other risks identified in the risk factors contained in Part I, Item 1A of this Annual Report on Form 10-K. These forward-looking statements speak only as of the date on which they are made, and we do not undertake any obligation to update any forward-looking statement to reflect events or circumstances after the date of this Annual Report on Form 10-K. If we do update or correct one or more forward-looking statements, you should not conclude that we will make additional updates or corrections with respect thereto or with respect to other forward-looking statements. Except where the context otherwise requires, in this Annual Report on Form 10-K, the terms “Pixelworks,” the “Company,” “we,” “us” and “our” mean Pixelworks, Inc., an Oregon corporation, and its wholly-owned subsidiaries.

 

3


Table of Contents

PART I

 

Item 1. Business.

Overview

We are an innovative designer, developer and marketer of video and pixel processing semiconductors and software for high-end digital video applications and hold 138 patents related to the visual display of digital image data. Our solutions enable manufacturers of digital display and projection devices, such as large-screen flat panel televisions and digital front projectors, to manufacture their products with a consistently high level of video quality, regardless of the content’s source or format. Our core technology leverages unique proprietary techniques for intelligently processing video signals from a variety of sources to ensure that all resulting images are optimized. Additionally, our products help our customers reduce costs and differentiate their display and projection devices, an important factor in industries that experience rapid innovation. Pixelworks was founded in 1997 and is incorporated under the laws of the state of Oregon.

Pixelworks’ flexible design architecture enables our technology to produce outstanding image quality in our customers’ products with a range of single-purpose integrated circuits (“ICs”), to system-on-chip (“SoC”) ICs that integrate microprocessor, memory and image processing functions. Additionally, we provide full solutions, including a software development environment and operating system, which enable our customers to more quickly develop and customize their display products, thus reducing their time to market and allowing them to incorporate differentiated features and functions.

Our primary target markets are liquid crystal display (“LCD”) large-screen televisions and 3LCD and digital light processing (“DLP”) digital front projectors, however we also target other segments within the flat panel display market, including digital signage.

We have adopted a product strategy that leverages our core competencies in video processing to address the evolving needs of the advanced flat panel display, digital projection and other markets that require superior image quality. We focus our product investments on developing video enhancement solutions for these markets, with particular focus on adding increased performance and functionality. Additionally, we look for ways to leverage our research and development investment into products that address other high-value markets where our innovative proprietary technology provides differentiation for us and our customers. We continually seek to expand our technology portfolio through internal development, co-development with business partners and evaluation of acquisition opportunities.

Digital Video Technology Trends

Over the course of the last several years, video technology has moved rapidly from analog technology, which utilizes waveform signals, to a new generation of digital technologies that utilize a grid of thousands of tiny picture elements, or pixels. Consequently, digital display devices have rapidly evolved to incorporate higher pixel counts and faster rates of screen refresh, both of which contribute to a sharper, clearer image. At the same time, digital display devices have increased in size and begun to incorporate newer video capabilities such as high-definition and, most recently, 3D. Accordingly, the video image processors that drive newer displays have had to increase their capabilities as well to keep pace with the ever growing needs for greater resolution, size and speed that digital technology affords.

The number and variety of digital video applications is increasing rapidly, and video is expanding to play a pervasive role across many aspects of business and personal lifestyle. Digital video content is being delivered from an increasing array of sources that vary dramatically in quality—on Blu-ray DVDs, via cable and satellite, across the Internet and on cell phones and smart devices. The sources and quality of video content range from very high-resolution programming produced by network or movie studios to very poor quality clips created by individuals.

 

4


Table of Contents

Regardless of the source or quality, increasingly, consumers are sharing video with others and viewing video on a growing array of form factors—from handheld devices to large screen displays. At the same time, the consumer expectation for ever higher quality video continues to rise, driven by higher display resolutions on larger TVs. These trends place new demands on video signal and pixel processing technology to enable display and projection devices to provide the best viewing experience possible across multiple display formats. For example, content created for one type of display device, such as a PC, must be scaled up or down to play back clearly on a different device, such as a television. On larger, higher-resolution TV screens, image quality deteriorates significantly, and must be compensated for with video processing technology that restores or even creates higher video quality.

The latest generations of advanced digital display devices enhance image performance in a number of ways, chief among them being increasing the size of the display, increasing the display resolution and increasing the number of times per second the image is refreshed. Premium displays currently feature “full HD” resolutions of 1920 columns by 1080 rows of pixels progressively scanned (“1080p”), display frame rates of 240Hz or more, are 3D ready and measure from 32 inches to 70 inches or more diagonally. In addition to the need for image enhancement, various applications, such as digital signage, Internet- enabled televisions and connected classroom environments, are creating a need for new networking capabilities that can enable the sharing of video across display devices and display environments.

Large-Screen Flat Panel Display Market

The market for flat panel displays has risen rapidly over the past decade and is projected to be worth more than $100 billion in sales annually by 2012, according to the industry research firm DisplaySearch. Key segments of growth within the flat panel display industry are consumer applications, such as PC monitors and digital televisions. Digital TVs in particular have transformed the flat panel market, as consumers have enthusiastically embraced advanced television displays that offer sharper and more lifelike images on larger and thinner screens. Increasingly, commercial applications such as public-space advertising, a form of digital signage, are also contributing to the growth of the flat panel market and the drive to improve the image and video quality of the panels themselves.

Flat panel display technologies include LCD, plasma display, rear-projection using LCDs, digital micro-mirror, and newer technologies, such as liquid crystal on silicon (“LCoS”) and organic light emitting diodes (“OLED”). Within flat panel displays, LCD and plasma have emerged as the preferred digital display technologies, with LCD leading the market in growth. The digital TV market and its high volume penetration with consumers has helped to secure the dominance of LCD technology. Shipments of LCD TVs are expected to account for around 77% of all TVs sold and grow from 190 million units in 2010 to 215 million units in 2011, according to DisplaySearch.

A large consumer market has pressured flat panel manufacturers to continually improve the quality of their displays, and as a result LCDs and other flat panel displays continue to increase in resolution and size. 1080p resolution is now the high-end standard, and larger flat panel displays are shifting rapidly from refresh rates of 50/60Hz to faster rates of 100/120Hz, 200/240Hz and even 400/480Hz. The shift to large, high-resolution flat panel displays combined with the transition to 1080p content and higher refresh rates is driving the need for high performance processor solutions to meet the enhanced video quality requirements of next generation display products. As flat panel display resolution and size increase, the challenge of “judder” becomes more of an issue. Judder occurs when content recorded at one rate of frames per second for film content must be converted to faster video rates, and as a result there is a jerkiness, or judder in the resulting video performance. This problem is intensified in larger displays and can be a problem regardless of the panel technology being used.

In addition to judder, LCD panels also suffer from blur in motion images as a result of the way the human brain processes the longer frame durations produced by an LCD panel. In the past, LCD panel manufacturers have tried to reduce blur by increasing the refresh rate of the panel to higher rates and inserting an extra “black” frame to

 

5


Table of Contents

reduce frame duration. But the black frame insertion method has had drawbacks—one of which was to make LCD screens seem less bright. Newer motion estimation/motion compensation (“MEMC”) technology uses the insertion of interpolated frames based on complex mathematical algorithms to shorten the duration of the video frame and create a clearer, crisper picture. MEMC also provides de-judder processing that smoothes out the jerkiness often apparent with large screen displays.

In recent years TV manufacturers have added new design elements and performance features to differentiate their products and slow price declines. Among these are the adoption of light emitting diode (“LED”) backlighting, an emphasis on lower power consumption, Internet connectivity and the development of 3D-enabled TVs. All of these trends are driving the need for high performance processor solutions to meet the enhanced video quality requirements of next generation display products.

LED backlighting enables higher contrast images in more advanced TVs. Manufacturers can use either dynamic color LEDs that are positioned behind the panel and allow for local area dimming, which provides higher contrast on selected sections of the screen; or white edge-LEDs positioned around the rim of the screen, which use a special diffusion panel to spread the light evenly behind the screen. LED backlighting also serves as a critical enabler of reduced power consumption. Because of its advantages, LED backlighting is expected to surpass traditional backlights that use fluorescent tubes by 2011 and achieve 74% penetration in 2013, according to DisplaySearch. LED backlighting requires a video processing control mechanism that determines when certain LEDs are lit, and how brightly, based on the video being displayed.

The combination of LED backlighting and 200/240 Hz technologies provides an enabling platform for new feature developments in LCD TVs, particularly 3D technology, which is an area of intense interest to television manufacturers and consumers alike. DisplaySearch forecasts that worldwide 3D TV shipments will rise from 3.2 million in 2010 to more than 91 million in 2014.

Consumers’ desire to use their televisions to view Internet content ranging from YouTube videos to downloaded high definition movies from Netflix and other vendors is driving TV manufacturers to incorporate Internet connectivity into their products. In addition to simple connectivity, these devices must also be able to scale and enhance Internet content so as to be optimally viewed on a large flat panel display. Limitations in bandwidth, latency, noise and content resolution create significant challenges, and video processors must be able to scale poorer quality video, reduce signal noise inherent to networks and enhance image quality in order to ensure optimal video performance. DisplaySearch estimates that approximately 45 million units, or 21% of all TVs shipped in 2010 were Internet enabled, and the number of connected TVs is expected to grow to more than 122 million in 2014.

Increasing screen sizes, higher frame rates, the desire to view Internet content on high-resolution displays, LED backlighting, 3D and other trends all present video performance challenges that must be addressed and are exacerbated with each new cycle of additional features. To differentiate their products, advanced flat panel manufacturers must implement video processing technologies that address these video performance issues as rapidly, as fully and as cost effectively as possible. Additionally, the interplay of performance, features, cost and power consumption is a key area of differentiation for digital television manufacturers. Most features and performance improvements carry cost premiums and increased power consumption, but intelligent design and utilization of appropriate video processing technologies can enable simultaneous improvements.

Digital Projection Market

Increasingly affordable price points are driving continued adoption of digital projectors in business and education, as well as among consumers. Technology improvements are helping reduce the size and weight of projection devices and increasing their performance. Projector models range from larger units designed to be permanently installed in a conference hall or other venue, to ultra portable devices weighing less than two pounds for maximum portability. According to Pacific Media Associates (PMA), the worldwide front projector market grew to a total of 8.49 million units sold in 2010 from 6.33 million units in 2009.

 

6


Table of Contents

Currently, the largest segment of the installed front projector market consists of business users who employ multimedia projectors to display both still and video presentation materials from PCs or other sources. Requirements for the business market include portability, compatibility with multiple software and hardware applications and features that ensure simple operation. In educational environments from elementary schools to university campuses, projectors help teachers integrate media-rich instruction into classrooms. Growth in overall projector sales is expected to come both from the business sector and the education market. Tiny, battery powered “pico” projectors embedded in a cell phone or PC, or available as independent devices weighing less than a pound, also are beginning to take hold in the consumer and business markets, fueled by their capability to display video content at high resolutions.

Consistent with the trends of other consumer products, digital projectors are increasingly incorporating networking capabilities that enable the sharing of video and other content among multiple devices. This in turn is enabling new use models for digital projection in both the education and business environments. For example, one teacher can present the same material simultaneously in multiple classrooms, and students in different classrooms can display and discuss their work. Such connectivity allows instant access to content and sharing of content, which promotes interaction and collaboration among dispersed groups. In the business setting, this connectivity enables teleconferencing and the seamless sharing of content for more effective meetings.

Additional Markets

In addition to the large-screen flat panel display and digital projection markets, other sectors are also taking advantage of the trend towards higher performance and connectivity in digital video technology. Some of the applications expected to grow as a result of enhanced video quality include digital signage, video conferencing and specialty monitors.

Worldwide, the emerging economies of Brazil, Russia, India and China, commonly referred to collectively as “BRIC,” are expected to be a leading driver of demand for information technology of all kinds, including projectors for business, education and the consumer sectors.

Our Core Technologies and Products

We have developed a portfolio of advanced video algorithms and intellectual property (“IP”) to address a broad range of challenges in digital video. Our technologies can dramatically improve video quality and are increasingly important as screen size and resulting quality issues increase. Our products are designed with a flexible architecture that allows us to combine algorithms and functional blocks of digital and mixed signal circuitry. Accordingly, our technologies can be implemented across multiple products and in powerful combinations within single products. The majority of our products include one or more technologies to provide high-quality video solutions to our customers.

Some of our proprietary core technologies include:

 

   

MEMC (motion estimation/motion compensation). Our proprietary MEMC technology significantly improves the performance and viewing experience of large advanced LCD panels by solving problems such as motion blur and judder. It also supports significant digital TV trends such as 3D, LED backlight local dimming (both edge-lit and full array) and 240Hz and higher frame rates. Additionally, our MEMC technology improves video performance in non-TV applications such as video conferencing, 3D gaming and projection.

 

   

Networking. Our networking technology enables the same video stream to be networked across multiple displays, for applications such as connected video projection and digital signage.

 

   

Digital keystone correction. Our technology provides enhanced keystone and image correction performance for digital projection systems, particularly for “short throw” projectors which must project clearly at severe angles due to space limitations.

 

7


Table of Contents

Our product development strategy is to leverage our expertise in video processing to address the evolving needs of the advanced flat panel display, digital projection and other markets that require superior image quality. We plan to continue to focus our development resources to maintain our market lead and provide leading edge solutions for the advanced LCD and DLP in the digital projection market and to enhance our video processing solutions for advanced flat panel displays and other markets. Additionally, we look for ways to leverage our research and development investment into products that address high-value markets where our innovative proprietary technology provides differentiation for us and our customers. We deliver our technology in a variety of offerings, which take the form of single-purpose chips, highly integrated SoCs that incorporate specialized software, and full solutions incorporating software and other tools.

Our primary product categories include the following:

 

   

ImageProcessor ICs. Our ImageProcessor ICs include embedded microprocessors, digital signal processing technology and software that control the operations and signal processing within high-end display systems such as projectors and high-resolution flat panels. ImageProcessor ICs were our first product offerings and continue to comprise the majority of our business. We have continued to refine the architectures for optimal performance, manufacturing our products on process technologies that align with our customers’ requirements. Additionally, we provide a software development environment and operating system that enables our customers to more quickly develop and customize the “look and feel” of their products.

 

   

Video Co-Processor ICs. Products in this category work in conjunction with an image processor to post-process video signals in order to enhance the performance or feature set of the overall video solution (for example, by significantly reducing judder and motion blur). Our video co-processor ICs can be used with our ImageProcessor ICs or with image processing solutions from other manufacturers, and in most cases can be incorporated by a display manufacturer without assistance from the supplier of the base image processor. This flexibility enables manufacturers to augment their existing or new designs to enhance their video display products.

 

   

Networked Display ICs. Our Networked Display ICs allow the same video stream to be networked across multiple displays, for example to connect projectors in different classrooms or to enable networked streaming of video in digital signage applications. Our Networked Display IC combines video sharing capabilities with video image processing, wireless connectivity and Internet connection to ensure high quality, multi-source video output and enhanced value to our projection display customers.

Customers, Sales and Marketing

The key focus of our global sales and marketing strategy is to achieve design wins with industry leading branded manufacturers in targeted markets and to continue building strong customer relationships. Once a design win has been achieved, sales and marketing efforts are focused on building long-term mutually beneficial business relationships with our customers by providing superior technology and reducing their costs, which complements our customers’ product development objectives and meets their expectations for price-performance and time to market. Marketing efforts are focused on building market-leading brand awareness and preference for our solutions.

We utilize direct sales and marketing resources in the U.S., China, Taiwan, Japan and Korea as well as indirect resources in several regions. In addition to sales and marketing representatives, we have field application engineers who provide technical expertise and assistance to manufacturing customers on final product development.

Our global distribution channel is multi-tiered and involves both direct and indirect distribution channels, as described below:

 

   

Distributors. Distributors are resellers in local markets who provide engineering support and stock our semiconductors in direct relation to specific manufacturing customer orders. Our distributors

 

8


Table of Contents
 

often have valuable and established relationships with our end customers, and in certain countries it is customary to sell to distributors. While distributor payment to us is not dependent upon the distributor’s ability to resell the product or to collect from the end customer, our distributors may provide longer payment terms to end customers than those we would offer. Sales to distributors accounted for 61%, 51% and 53% of revenue in 2010, 2009 and 2008, respectively.

Our largest distributor, Tokyo Electron Device Ltd. (“TED”), is located in Japan. TED represented 44%, 35% and 32% of revenue in 2010, 2009 and 2008, respectively, and accounted for 45% and 22% of accounts receivable at December 31, 2010 and 2009, respectively. No other distributor accounted for more than 10% of revenue in 2010, 2009 and 2008.

We also have distributor relationships in Taiwan, China, Korea, Europe, Southeast Asia and the U.S.

 

   

Direct Relationships. We have established direct relationships with companies that manufacture high-end display systems. Some of our direct relationships are supported by commission-based manufacturers’ representatives, who are independent sales agents that represent us in local markets and provide engineering support but do not carry inventory. Revenue through direct relationships accounted for 39%, 49% and 47% of total revenue in 2010, 2009 or 2008, respectively.

We have direct relationships with companies falling into the following three classifications:

 

   

Integrators. Integrators are original equipment manufacturers who build display devices based on specifications provided by branded suppliers.

 

   

Branded Manufacturers. Branded manufacturers are globally recognized manufacturers who develop display device specifications, and manufacture, market and distribute display devices either directly or through resellers to end-users.

 

   

Branded Suppliers. Branded suppliers are globally recognized suppliers who develop display device specifications and then source them from integrators, typically in Asia, and distribute them either directly or through resellers to end-users.

Revenue attributable to our top five end customers represented 58%, 56% and 55% of revenue in 2010, 2009 and 2008, respectively. End customers include customers who purchase directly from us as well as customers who purchase products indirectly through distributors. Sales to Seiko Epson Corporation represented more than 10% of revenue in 2010, 2009, and 2008. Sales to SANYO Electric Co., Ltd. represented more than 10% of revenue in 2010 and 2009. Sales to Hitachi represented more than 10% of revenue in 2010. No other end customer accounted for more than 10% of revenue in 2010, 2009 or 2008.

Seasonality

Our business is subject to seasonality related to the markets we serve and the location of our customers. We have historically experienced higher revenue from the multimedia projector market in the third quarter of the year, and lower revenue in the first quarter of the year, as our Japanese customers reduce inventories in anticipation of their March 31 fiscal year end. Additionally, holiday demand for consumer electronics, including high-end televisions, has sometimes contributed to increased revenue in the second half of the year. Our sales in 2010, 2009 and 2008, however, did not follow our historical trends due in part to the global crisis in the credit and financial markets, continued economic uncertainty and reductions in consumer spending. As a result, it is extremely difficult for us to predict when or if historical trends are likely to resume.

Geographic Distribution of Sales

Sales outside the U.S. accounted for approximately 96%, 97% and 95% of our revenue in 2010, 2009 and 2008, respectively.

 

9


Table of Contents

Financial information regarding our domestic and foreign operations is presented in Note 11 of the Notes to Consolidated Financial Statements included in Item 8. Financial Statements and Supplementary Data.

Backlog

Our sales are made pursuant to customer purchase orders for delivery of standard products. The volume of product actually purchased by our customers, as well as shipment schedules, are subject to frequent revisions that reflect changes in both the customers’ needs and product availability. Our entire order backlog is cancelable, with a portion subject to cancellation fees. In light of industry practice and our own experience, we do not believe that backlog as of any particular date is indicative of future results.

Competition

In general, the semiconductor industry is intensely competitive. The markets for higher performance display and projection devices, including the markets for advanced flat panel display televisions, multimedia projectors and other applications demanding high quality video, are characterized by rapid technological change, evolving industry standards, compressed product life cycles and declining average selling prices. We believe the principal competitive factors in our markets are product performance, time to market, cost, functional versatility provided by software, customer relationships and reputation, patented innovative designs, levels of product integration, compliance with industry standards and system design cost.

Our current products face competition from specialized display controller developers and in-house display controller ICs designed by our customers and potential customers. Additionally, new alternative display processing technologies and industry standards may emerge that directly compete with technologies that we offer.

We compete with specialized and diversified electronics and semiconductor companies that offer display processors or scaling components. Some of these include Broadcom Corporation, i-Chips Technologies Inc., Integrated Device Technology, Inc., MediaTek Inc., MStar Semiconductor, Inc., Realtek Semiconductor Corp., Renesas Technology Corp., Sigma Designs, Inc., Silicon Image, Inc., STMicroelectronics N.V., Sunplus Technology Co., Ltd., Trident Microsystems, Inc., Zoran Corporation and other companies. Potential and current competitors may include diversified semiconductor manufacturers and the semiconductor divisions or affiliates of some of our customers, including Intel Corporation, LG Electronics, Inc., Matsushita Electric Industrial Co., Ltd., Mitsubishi Digital Electronics America, Inc., National Semiconductor Corporation, NEC Corporation, NVIDIA Corporation, NXP Semiconductors, N.V., Samsung Electronics Co., Ltd., SANYO Electric Co., Ltd., Seiko Epson Corporation, Sharp Electronics Corporation, Sony Corporation, Texas Instruments Incorporated and Toshiba America, Inc. In addition, start-up companies may seek to compete in our markets.

Research and Development

Our internal research and development efforts are focused on the development of our solutions for the multimedia projector and high-end television markets. Our development efforts are focused on pursuing higher levels of video performance, integration and new features in order to provide our customers with solutions that enable them to introduce market leading products and help lower final systems costs for our customers.

We have invested, and expect to continue to invest, significant resources in research and development activities. Our research and development expense was $22.8 million, $20.1 million and $26.5 million in 2010, 2009 and 2008, respectively.

Manufacturing

Within the semiconductor industry we are known as a “fabless” company, meaning that we do not manufacture the semiconductors that we design and develop, but instead contract with four third-party foundries for wafer fabrication and other manufacturers for packaging, assembly and testing of our products. The fabless approach allows us to concentrate our resources on product design and development where we believe we have greater competitive advantages.

 

10


Table of Contents

See “Risk Factors” in Part I, Item 1A of this Annual Report on Form 10-K for information on risks related to our manufacturing strategy and processes.

Intellectual Property

We rely on a combination of nondisclosure agreements and patent, copyright, trademark and trade secret laws to protect the algorithms, design and architecture of our technology. Currently, we hold 138 patents and have 31 patent applications pending, which relate generally to improvements in the visual display of digital image data including, but not limited to, improvements in image scaling, image correction, automatic image optimization and video signal processing for digital displays. Our U.S. and foreign patents are generally enforceable for 20 years from the date they were filed. Accordingly, our issued patents have from approximately 7 to 16 years remaining in their respective term, depending on their filing date. We believe that the remaining term of our patents is adequate relative to the expected lives of our related products.

We intend to seek patent protection for other significant technologies that we have already developed and expect to seek patent protection for future products and technologies as necessary. Patents may not be issued as a result of any pending applications and any claims allowed under issued patents may be insufficiently broad to protect our technology. Existing or future patents may be invalidated, diluted, circumvented, challenged or licensed to others. Furthermore, the laws of certain foreign countries in which our products are or may be developed, manufactured or sold, including various countries in Asia, may not protect our products or intellectual property rights to the same extent as do the laws of the United States and, thus, make the possibility of piracy of our technology and products more likely in these countries.

The semiconductor industry is characterized by vigorous protection of intellectual property rights, which have resulted in significant and often protracted and expensive litigation. We, our customers or our foundries from time to time may be notified of claims that we may be infringing patents or other intellectual property rights owned by third parties. Litigation by or against us relating to patent infringement or other intellectual property matters could result in significant expense to us and divert the efforts of our technical and management personnel, whether or not such litigation results in a determination favorable to us. In the event of an adverse result in any such litigation, we could be required to pay substantial damages, cease the manufacture, use and sale of infringing products, expend significant resources to develop non-infringing technology, discontinue the use of certain processes or obtain licenses to the infringing technology. We may not be able to settle any alleged patent infringement claim through a cross-licensing arrangement. In the event any third party made a valid claim against us, our customers or our foundries, and a license was not made available to us on terms that are acceptable to us or at all, we would be adversely affected.

See “Risk Factors” in Part I, Item 1A, and “Note 7: Commitments and Contingencies” in Part II, Item 8 of this Annual Report on Form 10-K for information on risks related to intellectual property.

Environmental Matters

Environmental laws and regulations are complex, change frequently and have tended to become more stringent over time. We have incurred, and may continue to incur, significant expenditures to comply with these laws and regulations and we may incur additional capital expenditures and asset impairments to ensure that our products and our vendors’ products are in compliance with these regulations. We would be subject to significant penalties for failure to comply with these laws and regulations.

See “Risk Factors” in Part I, Item 1A of this Annual Report on Form 10-K for information on environmental risks.

 

11


Table of Contents

Employees

As of December 31, 2010, we had a total of 243 employees compared to 222 employees as of December 31, 2009. We consider our relations with our employees to be good.

Availability of Securities and Exchange Commission Filings

We make available through our website our annual report on Form 10-K, quarterly reports on Form 10-Q, current reports on Form 8-K and amendments to those reports free of charge as soon as reasonably practicable after we electronically file such material with the Securities and Exchange Commission. Our Internet address is www.pixelworks.com. The content on, or that can be accessed through, our website is not incorporated by reference into this filing.

 

Item 1A. Risk Factors.

Investing in our shares of common stock involves a high degree of risk, and investors should carefully consider the risks described below before making an investment decision. If any of the following risks occur, the market price of our shares of common stock could decline and investors could lose all or part of their investment. Additional risks that we currently believe are immaterial may also impair our business operations. In assessing these risks, investors should also refer to the other information contained or incorporated by reference in this Annual Report on Form 10-K for the year ended December 31, 2010, including our consolidated financial statements and related notes, and our other filings made from time to time with the Securities and Exchange Commission.

Company Specific Risks

Our product strategy, which is targeted at markets demanding superior video and image quality, may not lead to new design wins or significantly increased revenue in a timely manner or at all, which could materially adversely affect our results of operations and limit our ability to grow.

We have adopted a product strategy that focuses on our core competencies in pixel processing and delivering high levels of video and image quality. With this strategy, we continue to make further investments in the development of our ImageProcessor architecture for the digital projector market, with particular focus on adding increased performance and functionality. For the advanced television market, our strategy focuses on implementing our intellectual property (“IP”) to improve the video performance of our customers’ image processors through the use of our Motion Estimation Motion Compensation (“MEMC”) co-processor integrated circuits (“ICs”). This strategy is designed to address the needs of the large-screen, high-resolution, high-quality segment of the television market. Although our product strategy is developed to take advantage of market trends, such markets may not develop or may take longer to develop than we expect. We cannot assure you that the products we are developing will adequately address the demands of our target customers, or that we will be able to produce our new products at costs that enable us to price these products competitively.

Even if our product strategy is properly targeted, we cannot assure you that the products we are developing will lead to a significant increase in revenue from new design wins. To achieve design wins, we must design and deliver cost-effective, innovative and integrated semiconductors that overcome the significant costs associated with qualifying a new supplier and which make developers reluctant to change component sources. Additionally, potential developers may be less likely or unwilling to select our products due to concerns over our financial strength. Further, design wins do not necessarily result in developers ordering large volumes of our products. Developers can choose at any time to discontinue using our products in their designs or product development efforts. A design win is not a binding commitment by a developer to purchase our products, but rather a decision by a developer to use our products in its design process. Even if our products are chosen to be incorporated into a developer’s products, we may still not realize significant revenue from the developer if its products are not commercially successful or it chooses to qualify, or incorporate the products, of a second source. Additionally,

 

12


Table of Contents

even if our product strategy is successful at achieving design wins and increasing our revenue, we may continue to incur operating losses due to the significant research and development costs that are required to develop competitive products for the advanced television market.

We have incurred indebtedness as a result of the sale of convertible debentures. We anticipate that we must repay or refinance the debentures by May 2011. We may be unable to meet this, or other, future capital requirements.

As of December 31, 2010, $15.8 million of our 1.75% convertible subordinated debentures (the “debentures”) were outstanding. Although the debentures are not due until 2024, the holders have the right to require us to purchase all or a portion of the debentures at each of the following dates: May 15, 2011, May 15, 2014 and May 15, 2019. Since the market price of our common stock is significantly below the conversion price of the debentures, we expect the holders to exercise their put option on May 15, 2011. We may not be able to refinance the debentures at terms that are as favorable as those currently contained in the debentures, or at terms that are acceptable to us, or at all. While we believe that our existing working capital, as well as funds available under our short-term line of credit will be sufficient to meet our capital requirements for the next twelve months, we cannot assure you that we will be able to maintain sufficient cash and marketable security balances to refinance or pay off the debentures when and if the put option is exercised, or that such a repurchase would not result in cash reserves too low for us to continue our business as a going concern. We may need, or could elect to seek, additional funding through public or private equity or debt financing, which we may not be able to obtain. If we issue equity securities, our shareholders may experience additional dilution or the new equity securities may have rights, preferences or privileges senior to those of our common stock.

We may not be able to borrow funds under our credit facility or secure future financing.

In December 2010, we entered into a Loan and Security Agreement with Silicon Valley Bank to provide for a secured, working capital-based, revolving line of credit. We view this line of credit as a source of available liquidity to fund fluctuations in our working capital requirements. For example, if we experience an increase in order activity from our customers, our cash balance may decrease due to the need to purchase inventories to fulfill those orders. If this occurs, we may have to draw on this facility in order to maintain our liquidity. As of December 31, 2010, we had borrowed $3.0 million on this line of credit.

This facility contains various conditions, covenants and representations with which we must be in compliance in order to borrow funds. We cannot assure you that we will be in compliance with these conditions, covenants and representations in the future when we may need to borrow funds under this facility. In addition, this facility expires on December 21, 2012 after which time we may need to secure new financing to continue funding fluctuations in our working capital requirements. We cannot assure you that we will be able to secure new financing, or financing on terms that are acceptable to us.

Dependence on a limited number of sole-source, third-party manufacturers for our products exposes us to shortages based on low manufacturing yield, errors in manufacturing, uncontrollable lead-times for manufacturing, capacity allocation, price increases with little notice, volatile inventory levels and delays in product delivery, which could result in delays in satisfying customer demand, increased costs and loss of revenue.

We do not own or operate a semiconductor fabrication facility and do not have the resources to manufacture our products internally. We rely on four third-party foundries to produce all of our wafers and three assembly and test vendors for completion of finished products. The wafers used in any one of our products are fabricated by only one foundry. Sole sourcing each product increases our dependence on our suppliers.

We have limited control over delivery schedules, quality assurance, manufacturing yields, potential errors in manufacturing and production costs. We do not have long-term supply contracts with our third-party manufacturers, so they are not obligated to supply us with products for any specific period of time, quantity or

 

13


Table of Contents

price, except as may be provided in a particular purchase order. Our suppliers can increase the prices of the products we purchase from them with little notice, which may cause us to increase the prices to our customers and harm our competitiveness. Because our requirements represent only a small portion of the total production capacity of our contract manufacturers, they could reallocate capacity to other customers even during periods of high demand for our products, as they have done in the past. We expect this may occur again in the future.

Establishing a relationship with a new contract manufacturer in the event of delays or increased prices would be costly and burdensome. The lead time to make such a change would be at least nine months, and the estimated time for us to adapt a product’s design to a particular contract manufacturer’s process is at least four months. Additionally, we have, and may continue to choose new foundries to manufacture our wafers which may require us to modify our design methodology flow for the process technology and intellectual property cores of the new foundry. If we have to qualify a new foundry or packaging, assembly and testing supplier for any of our products or if we are unable to obtain our products from our contract manufacturers on schedule, at costs that are acceptable to us, or at all, we could incur significant delays in shipping products, our ability to satisfy customer demand could be harmed, our revenue from the sale of products may be lost or delayed and our customer relationships and ability to obtain future design wins could be damaged.

We may fail to retain or attract the specialized technical and management personnel required to successfully operate our business.

Our success depends on the continued services of our executive officers and other key management, engineering, and sales and marketing personnel and on our ability to continue to attract, retain and motivate qualified personnel. Competition for skilled engineers and management personnel is intense within our industry, and we may not be successful in hiring and retaining qualified individuals. The loss of, or inability to hire, key personnel could limit our ability to develop new products and adapt existing products to our customers’ requirements, and may result in lost sales and a diversion of management resources. We have experienced, and may continue to experience difficulty in hiring and retaining qualified engineering personnel in our Shanghai design center.

We may be unable to successfully manage any future growth, including the integration of any future acquisition or equity investment, which could disrupt our business and severely harm our financial condition.

We may determine that it is beneficial to increase our capacity to develop new and enhanced products in the future. If we fail to effectively manage internal growth, our operating expenses may increase more rapidly than our revenue, adversely affecting our financial condition and results of operations. To manage any future growth effectively in a rapidly evolving market, we must be able to maintain and improve our operational and financial systems, train and manage our employee base and attract and retain qualified personnel with relevant experience. We must also manage multiple relationships with customers, business partners, contract manufacturers, suppliers and other third parties. We could spend substantial amounts of time and money in connection with expansion efforts for which we may not realize any profit. Our systems, procedures, controls or financial resources may not be adequate to support our operations and we may not be able to grow quickly enough to exploit potential market opportunities.

In addition, we may not be able to successfully integrate the businesses, products, technologies or personnel of any entity that we might acquire in the future, and any failure to do so could disrupt our business and seriously harm our financial condition. Our operation of any acquired business would involve numerous risks, including, but not limited to:

 

   

problems combining the acquired operations, technologies or products;

 

   

unanticipated costs;

 

   

diversion of management’s attention from existing operations;

 

   

adverse effects on existing business relationships with customers;

 

   

risks associated with entering markets in which we have no or limited prior experience;

 

14


Table of Contents
   

potential loss of key employees, particularly those of the acquired organizations; and

 

   

risks associated with implementing adequate internal control, management, financial and operating reporting systems.

Any future acquisitions and investments could also result in any of the following negative events, among others:

 

   

issuance of stock that dilutes current shareholders’ percentage ownership;

 

   

incurrence of debt;

 

   

assumption of liabilities;

 

   

amortization expenses related to acquired intangible assets;

 

   

impairment of goodwill;

 

   

large and immediate write-offs or other charges;

 

   

loss of investment; and

 

   

decreases in cash and marketable securities that could otherwise serve as working capital.

Because of our long product development process and sales cycles, we may incur substantial costs before we earn associated revenue and ultimately may not sell as many units of our products as we originally anticipated.

We develop products based on anticipated market and customer requirements and incur substantial product development expenditures, which can include the payment of large up-front, third-party license fees and royalties, prior to generating associated revenue. Our work under these projects is technically challenging and places considerable demands on our limited resources, particularly on our most senior engineering talent. Because the development of our products incorporates not only our complex and evolving technology but also our customers’ specific requirements, a lengthy sales process is often required before potential customers begin the technical evaluation of our products. Our customers typically perform numerous tests and extensively evaluate our products before incorporating them into their systems. The time required for testing, evaluation and design of our products into a customer’s system can take up to nine months or more. It can take an additional nine months or longer before a customer commences volume shipments of systems that incorporate our products. We cannot assure you that the time required for the testing, evaluation and design of our products by our customers would not be significantly longer than nine months.

Because of the lengthy development and sales cycles, we will experience delays between the time we incur expenditures for research and development, sales and marketing and inventory and the time we generate revenue, if any, from these expenditures. Additionally, if actual sales volumes for a particular product are substantially less than originally anticipated, we may experience large write-offs of capitalized license fees, software development tools, product masks, inventories or other capitalized or deferred product-related costs, or increased amortization of non-cancelable prepaid royalties, any of which would negatively affect our operating results. For example, our provisions for obsolete inventory and lower of cost or market write–downs were $1.6 million, $1.2 million and $1.5 million in 2010, 2009 and 2008, respectively.

If we are not profitable in the future, we may be unable to continue our operations.

We have incurred operating losses since 2004. If and when we achieve profitability depends upon a number of factors, including our ability to develop and market innovative products, accurately estimate inventory needs, contract effectively for manufacturing capacity and maintain sufficient funds to finance our activities. If we are not profitable in the future, we may be unable to continue our operations.

 

15


Table of Contents

A significant amount of our revenue comes from a limited number of customers and distributors, exposing us to increased credit risk and subjecting our cash flow to the risk that any of our customers or distributors could decrease or cancel its orders.

The display manufacturing market is highly concentrated and we are, and will continue to be, dependent on a limited number of customers and distributors for a substantial portion of our revenue. Sales to our top distributor represented 44%, 35% and 32% of revenue in 2010, 2009 and 2008, respectively. Revenue attributable to our top five end customers represented 58%, 56% and 55% of revenue in 2010, 2009 and 2008, respectively. As of December 31, 2010 we had two accounts that represented 10% or more of accounts receivable. As of December 31, 2009, we had three accounts that each represented 10% or more of accounts receivable. All of the orders included in our backlog are cancelable. A reduction, delay or cancellation of orders from one or more of our significant customers, or a decision by one or more of our significant customers to select products manufactured by a competitor or to use its own internally-developed semiconductors, would significantly impact our revenue. Further, the concentration of our accounts receivable with a limited number of customers increases our credit risk. The failure of these customers to pay their balances, or any customer to pay future outstanding balances, would result in an operating expense and reduce our cash flows.

Our dependence on selling to distributors and integrators increases the complexity of managing our supply chain and may result in excess inventory or inventory shortages.

Selling to distributors and original equipment manufacturers (“OEMs”) that build display devices based on specifications provided by branded suppliers, also referred to as integrators, reduces our ability to forecast sales accurately and increases the complexity of our business. Our sales are made on the basis of customer purchase orders rather than long-term purchase commitments. Our distributors, integrators and customers may cancel or defer purchase orders at any time but we must order wafer inventory from our contract manufacturers three to four months in advance.

The estimates we use for our advance orders from contract manufacturers are based, in part, on reports of inventory levels and production forecasts from our distributors and integrators, which act as intermediaries between us and the companies using our products. This process requires us to make numerous assumptions concerning demand and to rely on the accuracy of the reports and forecasts of our distributors and integrators, each of which may introduce error into our estimates of inventory requirements. Our failure to manage this challenge could result in excess inventory or inventory shortages that could materially impact our operating results or limit the ability of companies using our semiconductors to deliver their products. For example, we overestimated demand for certain of our products which led to significant charges for obsolete inventory in 2010, 2009 and 2008. On the other hand, if we underestimate demand, we would forego revenue opportunities, lose market share and damage our customer relationships.

International sales account for almost all of our revenue, and if we do not successfully address the risks associated with international sales, our revenue could decrease.

Sales outside the U.S. accounted for approximately 96%, 97% and 95% of revenue in 2010, 2009 and 2008, respectively. We anticipate that sales outside the U.S. will continue to account for a substantial portion of our revenue in future periods. In addition, customers who incorporate our products into their products sell a substantial portion of their products outside of the U.S., and all of our products are manufactured outside of the U.S. We are, therefore, subject to many international risks, including, but not limited to:

 

   

increased difficulties in managing international distributors and manufacturers due to varying time zones, languages and business customs;

 

   

compliance with U.S. laws affecting operations outside of the U.S., such as the Foreign Corrupt Practices Act;

 

   

foreign currency exchange fluctuations in the currencies of Japan, the People’s Republic of China (“PRC”), Taiwan or Korea;

 

16


Table of Contents
   

reduced or limited protection of our IP, particularly in software, which is more prone to design piracy;

 

   

difficulties in collecting outstanding accounts receivable balances;

 

   

changes in tax laws and the interpretation of those laws;

 

   

difficulties regarding timing and availability of export and import licenses;

 

   

political and economic instability, particularly in the PRC, Japan, Taiwan, or Korea;

 

   

difficulties in maintaining sales representatives outside of the U.S. that are knowledgeable about our industry and products;

 

   

changes in the regulatory environment in the PRC, Japan, Taiwan and Korea that may significantly impact purchases of our products by our customers; and

 

   

outbreaks of health epidemics in the PRC or other parts of Asia.

In addition, jurisdictions in which we do business could impose more or new tariffs, quotas, trade barriers and similar trade restrictions on our sales. Moreover, economic changes, geopolitical conflicts, territory activity, political unrest, civil strife, acts of war, public corruption and other economic and political uncertainties could interrupt and negatively affect our business operations. All of these factors could result in increased costs or decreased revenues, and could materially affect our product sales, financial condition and results of operations.

The concentration of our employees, manufacturers and customers in the PRC, Japan, Korea, Taiwan and Singapore increases our risk that a natural disaster, work stoppage or economic or political instability in the region could disrupt our operations or increase .

Most of our current manufacturers and customers are located in the PRC, Japan, Korea, Taiwan or Singapore. In addition, a majority of our employees are located in this region. Disruptions from natural disasters, health epidemics and political, social and economic instability may affect the region and would have a negative impact on our results of operations. In addition, the economy of the PRC differs from the economies of many countries in respects such as structure, government involvement, level of development, growth rate, capital reinvestment, allocation of resources, self-sufficiency, rate of inflation, foreign currency flows and balance of payments position, among others. We cannot be assured that the PRC’s economic policies will be consistent or effective. Our results of operations and financial position may be harmed by changes in the PRC’s political, economic or social conditions.

In addition, the risk of earthquakes in the Pacific Rim region is significant due to the proximity of major earthquake fault lines in the area. Common consequences of earthquakes include power outages and disruption or impairment of production capacity. Earthquakes, fire, flooding, power outages and other natural disasters in the Pacific Rim region, or political unrest, labor strikes or work stoppages in countries where our manufacturers and customers are located, would likely result in the disruption of our manufacturers’ and customers’ operations. Any disruption resulting from extraordinary events could cause significant delays in shipments of our products until we are able to shift our manufacturing from the affected contractor to another third-party vendor. There can be no assurance that alternative capacity could be obtained on favorable terms, or in a timely manner, if at all.

Our operations in certain foreign and developing markets expose us to political, economic and regulatory risks.

Our growth strategy depends in part on our ability to expand our operations in developing markets, including Brazil, Russia, India, China and Southeast Asia. However, some developing markets have greater political and economic volatility and greater vulnerability to infrastructure and labor disruptions than established markets. In many foreign countries, particularly in those with developing economies, it is common to engage in business practices that are prohibited by laws and regulations applicable to us, such as the Foreign Corrupt Practices Act or similar local anti-bribery laws. These laws generally prohibit companies and their agents or intermediaries from making improper payments to government officials for the purpose of obtaining or retaining business. Failure to comply with these laws could subject us to civil and criminal penalties that could materially and adversely impact our financial condition and results of operations.

 

17


Table of Contents

Additionally, we have employees located in offices in Japan, Taiwan, Korea and the PRC and as such, a portion of our operating expenses as well as foreign income taxes payable are denominated in foreign currencies. Accordingly, our operating results are affected by changes in the exchange rate between the U.S. dollar and those currencies. Any future strengthening of those currencies against the U.S. dollar could negatively impact our operating results by increasing our operating expenses as measured in U.S. dollars. We analyze our exposure to foreign currency fluctuations and may engage in financial hedging techniques in the future to attempt to minimize the effect of these potential fluctuations; however, foreign currency exchange rate fluctuations may adversely affect our financial results in the future.

We may be unable to successfully implement new products or enhancements to our current products due to our prior or any potential future restructuring actions, which could adversely affect our future sales and financial condition.

We initiated restructuring plans in November 2006 and December 2008 which were completed in December 2008 and June 2009, respectively. These restructuring plans included consolidation and closure of certain offices, reductions in headcount and significant write-offs of assets. Although our restructuring plans were intended to improve efficiency and return the Company to profitability, these restructuring plans and any future restructuring actions may slow our development of new or enhanced products by limiting our research and development and engineering activities. If we are unable to successfully introduce new or enhanced products, our sales and financial condition will be adversely affected.

Continued compliance with regulatory and accounting requirements will be challenging and will require significant resources.

We spend a significant amount of management time and external resources to comply with changing laws, regulations and standards relating to corporate governance and public disclosure, including evolving Securities and Exchange Commission rules and regulations, NASDAQ Global Market rules, the Dodd-Frank Wall Street Reform and Consumer Protection Act and the Sarbanes-Oxley Act of 2002, which requires management’s annual review and evaluation of internal control over financial reporting. If we are unable to maintain an effective system of internal controls, our shareholders could lose confidence in the accuracy and completeness of our financial reports which in turn could cause our stock price to decline.

Additionally, one of the covenants of the indenture governing the debentures could possibly be interpreted such that if we are late with any of our required filings under the Securities Exchange Act of 1934, as amended (“Exchange Act”), and if we fail to affect a cure within 60 days, the holders of the debentures can put the debentures back to the Company, whereby the debentures become immediately due and payable. As a result of our restructuring efforts, we have fewer employees to perform day-to-day controls, processes and activities and, additionally, certain functions have been transferred to new employees who are not as familiar with our procedures. These changes increase the risk that we will be unable to make timely filings in accordance with the Exchange Act. Any resulting default under our debentures would have a material adverse effect on our cash position and operating results.

Our net operating loss carryforwards may be limited or they may expire before utilization

As of December 31, 2010, we had U.S. federal tax net operating loss carryforwards of approximately $173.1 million, which expire at various dates from 2011 through 2027. These net operating loss carryforwards may be used to offset future taxable income and thereby reduce our U.S. federal income taxes otherwise payable. Section 382 of the Internal Revenue Code of 1986, as amended (“the Code”), imposes an annual limit on the ability of a corporation that undergoes an “ownership change” to use its net operating loss carry forwards to reduce its tax liability. In the event of certain changes in our shareholder base, we may at some point in the future experience an “ownership change” as defined in Section 382 of the Code. Accordingly, our use of the net operating loss carryforwards may be limited by the annual limitations described in Section 382 of the Code. In addition, all or a portion of these net operating loss carryforwards may expire unutilized.

 

18


Table of Contents

Our effective income tax rate is subject to unanticipated changes in, or different interpretations of tax rules and regulations and forecasting our effective income tax rate is complex and subject to uncertainty.

As a global company, we are subject to taxation by a number of taxing authorities and as such, our tax rates vary among the jurisdictions in which we operate. Unanticipated changes in our tax rates could affect our future results of operations. Our effective tax rates could be adversely affected by changes in the mix of earnings in countries with differing statutory tax rates, changes in tax laws or the interpretation of tax laws either in the United States or abroad, or by changes in the valuation of our deferred tax assets and liabilities. The ultimate outcomes of any future tax audits are uncertain, and we can give no assurance as to whether an adverse result from one or more of them would have a material effect on our operating results and financial position.

The computation of income tax expense is complex as it is based on the laws of numerous tax jurisdictions and requires significant judgment on the application of complicated rules governing accounting for tax provisions under U.S. generally accepted accounting principles. Income tax expense for interim quarters is based on a forecast of our global tax rate for the year, which includes forward looking financial projections, including the expectations of profit and loss by jurisdiction, and contains numerous assumptions. For these reasons, our global tax rate may be materially different than our forecast.

Company Risks Related to the Semiconductor Industry and Our Markets

Our highly integrated products and high-speed mixed signal products are difficult to manufacture without defects and the existence of defects could result in increased costs, delays in the availability of our products, reduced sales of products or claims against us.

The manufacture of semiconductors is a complex process and it is often difficult for semiconductor foundries to produce semiconductors free of defects. Because many of our products are more highly integrated than other semiconductors and incorporate mixed signal analog and digital signal processing, multi-chip modules and embedded memory technology, they are even more difficult to produce without defects. Defective products can be caused by design or manufacturing difficulties. Therefore, identifying quality problems can occur only by analyzing and testing our semiconductors in a system after they have been manufactured. The difficulty in identifying defects is compounded because the process technology is unique to each of the multiple semiconductor foundries we contract with to manufacture our products. Despite testing by both our customers and us, errors or performance problems may be found in existing or new semiconductors.

Failure to achieve defect-free products may result in increased costs and delays in the availability of our products. Additionally, customers could seek damages from us for their losses and shipments of defective products may harm our reputation with our customers. We have experienced field failures of our semiconductors in certain customer applications that required us to institute additional testing. As a result of these field failures, we have incurred warranty costs due to customers returning potentially affected products and have experienced reductions in revenues due to delays in production. Our customers have also experienced delays in receiving product shipments from us that resulted in the loss of revenue and profits. In 2010, for example, we incurred higher than expected yield losses due to defective third party IP incorporated into certain of our products, which resulted in higher direct material cost and a temporary inability to meet our customer’s requested demand. Although we were able to resolve the issue without incurring material losses and have implemented additional processes to control this type of risk, similar issues may occur again in the future. Additionally, shipments of defective products could cause us to lose customers or to incur significant replacement costs, either of which would harm our business.

The development of new products is extremely complex and we may be unable to develop our new products in a timely manner and without defects, errors or bugs, or at all, which would result in a failure to obtain new design wins and/or maintain our current revenue levels.

The manufacture of semiconductors is a complex process and many of our products are highly integrated and incorporate mixed analog and digital signal processing, multichip modules and embedded memory technology,

 

19


Table of Contents

further complicating the development process. In addition to the inherent difficulty of designing complex ICs, product development delays may result from:

 

   

difficulties in hiring and retaining necessary technical personnel;

 

   

difficulties with contract manufacturers;

 

   

difficulties in reallocating engineering resources and overcoming resource limitations;

 

   

changes to product specifications and customer requirements;

 

   

changes to market or competitive product requirements; and

 

   

unanticipated engineering complexities.

Even if we are able to meet our customers’ design windows, the highly complex products we provide to our customers may contain defects, errors and bugs when they are first introduced. We have in the past and may in the future experience these defects, errors and bugs. In addition, if any of our products do contain defects, errors or bugs when first introduced, we may be unable to correct the problems at an acceptable cost or at all. Consequently, our reputation may be damaged and customers may be reluctant to buy our products, which could harm our ability to retain existing customers and to attract new customers. In addition, any defects, errors or bugs could interrupt or delay sales of our new products to our customers. If we are not successful in development of new products, our financial results will be adversely affected.

We use a customer-owned tooling process for manufacturing most of our products which exposes us to the possibility of poor yields and unacceptably high product costs.

We build most of our products on a customer-owned tooling basis, also known in the semiconductor industry as COT, whereby we directly contract the manufacture of our products, including wafer production, assembly and test. As a result, we are subject to increased risks arising from wafer manufacturing yields and risks associated with coordination of the manufacturing, assembly and testing process. Poor product yields result in higher product costs, which could make our products less competitive if we increase our prices to compensate for our higher costs, or could result in lower gross profit margins if we do not increase our prices.

Intense competition in our markets may reduce sales of our products, reduce our market share, decrease our gross profit and result in large losses.

We compete with specialized and diversified electronics and semiconductor companies that offer display processors or scaling components. Some of these include Broadcom Corporation, i-Chips Technologies Inc., Integrated Device Technology, Inc., Intersil Corporation, MediaTek Inc., MStar Semiconductor, Inc., Realtek Semiconductor Corp., Renesas Electronics America, Sigma Designs, Inc., Silicon Image, Inc., STMicroelectronics N.V., Sunplus Technology Co., Ltd., Trident Microsystems, Inc., Zoran Corporation and other companies. Potential and current competitors may include diversified semiconductor manufacturers and the semiconductor divisions or affiliates of some of our customers, including Intel Corporation, LG Electronics, Inc., Matsushita Electric Industrial Co., Ltd., Mitsubishi Digital Electronics America, Inc., NEC Corporation, NVIDIA Corporation, Samsung Electronics Co., Ltd., SANYO Electric Co., Ltd., Seiko Epson Corporation, Sharp Electronics Corporation, Sony Corporation, Texas Instruments Incorporated and Toshiba America, Inc. In addition, start-up companies may seek to compete in our markets.

Many of our competitors have longer operating histories and greater resources to support development and marketing efforts than we do. Some of our competitors operate their own fabrication facilities. These competitors may be able to react more quickly and devote more resources to efforts that compete directly with our own. Our current or potential customers have developed, and may continue to develop, their own proprietary technologies and become our competitors. Increased competition from both competitors and our customers’ internal development efforts could harm our business, financial condition and results of operations by, for example,

 

20


Table of Contents

increasing pressure on our profit margin or causing us to lose sales opportunities. In 2010, for example, frame rate conversion technology similar to that used in our line of MEMC co-processors continued to be integrated into the SoC products of our competitors, particularly in lower refresh rate television products. We cannot assure you that we can compete successfully against current or potential competitors.

If we are not able to respond to the rapid technological changes and evolving industry standards in the markets in which we compete, or seek to compete, our products may become less desirable or obsolete.

The markets in which we compete or seek to compete are subject to rapid technological change and miniaturization capabilities, frequent new product introductions, changing customer requirements for new products and features and evolving industry standards. The introduction of new technologies and emergence of new industry standards could render our products less desirable or obsolete, which could harm our business and significantly decrease our revenue. Examples of changing industry standards include the growing use of broadband to deliver video content, increased display resolution and size, faster screen refresh rates, video capability such as high definition and 3D, the proliferation of new display devices and the drive to network display devices together. Our products are incorporated into our customers’ products, which have different parts and specifications and utilize multiple protocols that allow them to be compatible with specific computers, video standards and other devices. If our customers’ products are not compatible with these protocols and standards, consumers will return, or not purchase, these products and the markets for our customers’ products could be significantly reduced. Additionally, if the technology used by our customers becomes less competitive due to cost, customer preferences or other factors relative to alternative technologies, sales of our products could decline.

Our developed software may be incompatible with industry standards and challenging and costly to implement, which could slow product development or cause us to lose customers and design wins.

We provide our customers with software development tools and with software that provides basic functionality for our ICs and enables enhanced connectivity of our customers’ products. Software development is a complex process and we are dependent on software development languages and operating systems from vendors that may limit our ability to design software in a timely manner. Also, as software tools and interfaces change rapidly, new software languages introduced to the market may be incompatible with our existing systems and tools, requiring significant engineering efforts to migrate our existing systems in order to be compatible with those new languages. Software development disruptions could slow our product development or cause us to lose customers and design wins. The integration of software with our products adds complexity, may extend our internal development programs and could impact our customers’ development schedules. This complexity requires increased coordination between hardware and software development schedules and increases our operating expenses without a corresponding increase in product revenue. This additional level of complexity lengthens the sales cycle and may result in customers selecting competitive products requiring less software integration.

The competitiveness and viability of our products could be harmed if necessary licenses of third-party technology are not available to us on terms that are acceptable to us or at all.

We license technology from independent third parties that is incorporated into our products or product enhancements. Future products or product enhancements may require additional third-party licenses that may not be available to us on terms that are acceptable to us or at all. In addition, in the event of a change in control of one of our licensors, it may become difficult to maintain access to its licensed technology. If we are unable to obtain or maintain any third-party license required to develop new products and product enhancements, we may have to obtain substitute technology with lower quality or performance standards, or at greater cost, either of which could seriously harm the competitiveness of our products.

 

21


Table of Contents

Our limited ability to protect our IP and proprietary rights could harm our competitive position by allowing our competitors to access our proprietary technology and to introduce similar products.

Our ability to compete effectively with other companies will depend, in part, on our ability to maintain the proprietary nature of our technology, including our semiconductor designs and software code. We provide the computer programming code for our software to customers in connection with their product development efforts, thereby increasing the risk that customers will misappropriate our proprietary software. We rely on a combination of patent, copyright, trademark and trade secret laws, as well as nondisclosure agreements and other methods, to help protect our proprietary technologies. We hold 138 patents and have 31 patent applications pending for protection of our significant technologies. Competitors in both the U.S. and foreign countries, many of whom have substantially greater resources than we do, may apply for and obtain patents that will prevent, limit or interfere with our ability to make and sell our products, or they may develop similar technology independently or design around our patents. Effective patent, copyright, trademark and trade secret protection may be unavailable or limited in foreign countries.

We cannot assure you that the degree of protection offered by patent or trade secret laws will be sufficient. Furthermore, we cannot assure you that any patents will be issued as a result of any pending applications or that any claims allowed under issued patents will be sufficiently broad to protect our technology. In addition, it is possible that existing or future patents may be invalidated, diluted, circumvented, challenged or licensed to others.

Others may bring infringement actions against us that could be time consuming and expensive to defend.

We may become subject to claims involving patents or other IP rights. IP claims could subject us to significant liability for damages and invalidate our proprietary rights. In addition, IP claims may be brought against customers that incorporate our products in the design of their own products. These claims, regardless of their success or merit and regardless of whether we are named as defendants in a lawsuit, would likely be time consuming and expensive to resolve and would divert the time and attention of management and technical personnel. Additionally, certain of our customer agreements include limited indemnification provisions for claims from third-parties related to our IP. Any IP litigation or claims also could force us to do one or more of the following:

 

   

stop selling products using technology that contains the allegedly infringing IP;

 

   

attempt to obtain a license to the relevant IP, which may not be available on terms that are acceptable to us or at all;

 

   

attempt to redesign those products that contain the allegedly infringing IP; or

 

   

pay damages for past infringement claims that are determined to be valid or which are arrived at in settlement of such litigation or threatened litigation.

If we are forced to take any of the foregoing actions, we may incur significant additional costs or be unable to manufacture and sell our products, which could seriously harm our business. In addition, we may not be able to develop, license or acquire non-infringing technology under reasonable terms. These developments could result in an inability to compete for customers or otherwise adversely affect our results of operations.

We are dependent on manufacturers of our semiconductor products not only to respond to changes in technology and industry standards but also to continue the manufacturing processes on which we rely.

To respond effectively to changes in technology and industry standards, we are dependent on our foundries to implement advanced semiconductor technologies and our operations could be adversely affected if those technologies are unavailable, delayed or inefficiently implemented. In order to increase performance and functionality and reduce the size of our products, we are continuously developing new products using advanced technologies that further miniaturize semiconductors and we are dependent on our foundries to develop and provide access to the advanced processes that enable such miniaturization. We cannot be certain that future

 

22


Table of Contents

advanced manufacturing processes will be implemented without difficulties, delays or increased expenses. Our business, financial condition and results of operations could be materially adversely affected if advanced manufacturing processes are unavailable to us, substantially delayed or inefficiently implemented.

Creating the capacity for new technological changes may cause manufacturers to discontinue older manufacturing processes in favor of newer ones. We must then either retire the affected part or develop a new version of the part that can be manufactured with a newer process. In the event that a manufacturing process is discontinued, our current suppliers may be unwilling or unable to manufacture our current products. We may not be able to place last time buy orders for the old technology or find alternate manufacturers of our products to allow us to continue to produce products with the older technology while we expend the significant costs for research and development and time to migrate to new, more advanced processes. For instance, we also utilize 0.18um and 0.15um standard logic processes, which may only be available for the next five to seven years. Additionally, a portion of our products use 0.11um technology for memory die, which is being phased out in favor of 65nm memory die to increase yields and decrease cost. Because of this transition, our customers must re-qualify the affected parts.

Shortages of materials used in the manufacturing of our products and other key components of our customers’ products may increase our costs, impair our ability to ship our products on time and delay our ability to sell our products.

From time to time, shortages of components and materials that are critical to the manufacture of our products and our customers’ products may occur. Such critical components and materials include semiconductor wafers and packages, double data rate memory die, display components, analog-to-digital converters, digital receivers, video decoders and voltage regulators. If material shortages occur, we may incur additional costs or be unable to ship our products to our customers in a timely fashion, both of which could harm our business and adversely affect our results of operations.

Our products are characterized by average selling prices that decline over relatively short periods of time, which will negatively affect our financial results unless we are able to reduce our product costs or introduce new products with higher average selling prices.

Average selling prices for our products decline over relatively short periods of time, while many of our product costs are fixed. When our average selling prices decline, our gross profit declines unless we are able to sell more units or reduce the cost to manufacture our products. We have experienced declines in our average selling prices and expect that we will continue to experience them in the future, although we cannot predict when they may occur or how severe they will be. Our financial results will suffer if we are unable to offset any reductions in our average selling prices by increasing our sales volumes, reducing our costs, adding new features to our existing products or developing new or enhanced products in a timely manner with higher selling prices or gross profits.

The cyclical nature of the semiconductor industry may lead to significant variances in the demand for our products and could harm our operations.

In the past, the semiconductor industry has been characterized by significant downturns and wide fluctuations in supply and demand. Also, the industry has experienced significant fluctuations in anticipation of changes in general economic conditions, including economic conditions in Asia, Europe and North America. The cyclical nature of the semiconductor industry has also led to significant variances in product demand and production capacity. We have experienced, and may continue to experience, periodic fluctuations in our financial results because of changes in industry-wide conditions.

Environmental laws and regulations have caused us to incur, and may again cause us to incur, significant expenditures to comply with applicable laws and regulations, and we may be assessed considerable penalties for noncompliance.

We are subject to numerous environmental laws and regulations. Compliance with current or future environmental laws and regulations could require us to incur substantial expenses which could harm our

 

23


Table of Contents

business, financial condition and results of operations. We have worked, and will continue to work, with our suppliers and customers to ensure that our products are compliant with enacted laws and regulations. Failure by us or our contract manufacturers to comply with such legislation could result in customers refusing to purchase our products and could subject us to significant monetary penalties in connection with a violation, either of which would have a material adverse effect on our business, financial condition and results of operations. Current environmental laws and regulations could become more stringent over time, imposing even greater compliance costs and increasing risks and penalties associated with violations, which could seriously harm our business, financial condition and results of operations. There can be no assurance that violations of environmental laws or regulations will not occur in the future as a result of our inability to obtain permits, human error, equipment failure or other causes.

Other Risks

The current adverse global economic environment and volatility in global credit and financial markets could materially and adversely affect our business and results of operations.

Slow economic activity, increased unemployment, decreased business and consumer confidence, reduced corporate profits and capital spending, adverse business conditions and liquidity concerns have contributed to and continue to contribute to a challenging economic environment. This environment has led to reduced spending in the markets in which we compete and made it difficult for our customers, our vendors and us to accurately forecast and plan future business activities. Furthermore, the constraints in the capital and credit markets may limit the ability of our customers to meet their liquidity needs, which could result in an impairment of their ability to make timely payments to us and to reduce their demand for our products, adversely impacting our results of operations and cash flows.

Future sales or other dilution of our equity could depress the market price of our common stock.

Sales of our common stock in the public market, or the perception that such sales could occur, could negatively impact the price of our common stock. We have a number of institutional shareholders that own significant blocks of our common stock. If one or more of these shareholders were to sell large portions of their holdings in a relatively short time, for liquidity or other reasons, the prevailing market price of our common stock could be negatively affected.

In addition, the issuance of additional shares of our common stock, or issuances of securities convertible into or exercisable for our common stock or other equity-linked securities, including preferred stock or warrants, will dilute the ownership interest of our common shareholders and could depress the market price of our common stock and impair our ability to raise capital through the sale of additional equity securities.

We may need to seek additional capital. If this additional financing is obtained through the issuance of equity securities, debt convertible into equity or options or warrants to acquire equity securities, our existing shareholders could experience significant dilution upon the issuance, conversion or exercise of such securities.

The price of our common stock has and may continue to fluctuate substantially.

Our stock price and the stock prices of technology companies similar to Pixelworks have been highly volatile. The price of our common stock may decline and the value of your investment may be reduced regardless of our performance. Market fluctuations, as well as general economic and political conditions, including recessions, interest rate changes or international currency fluctuations, may negatively impact the market price of our common stock. Additional factors that could negatively impact our stock price include:

 

   

actual or anticipated fluctuations in our operating results;

 

   

changes in expectations as to our future financial performance;

 

   

changes in financial estimates of securities analysts;

 

24


Table of Contents
   

announcements by us or our competitors of technological innovations, design wins, contracts, standards, acquisitions or divestitures;

 

   

the operating and stock price performance of other comparable companies;

 

   

inconsistent trading volume levels of our common stock; and

 

   

changes in market valuations of other technology companies.

Any inability or perceived inability of investors to realize a gain on an investment in our common stock could have an adverse effect on our business, financial condition and results of operations by potentially limiting our ability to retain our customers, to attract and retain qualified employees and to raise capital.

We may be unable to maintain compliance with NASDAQ Marketplace Rules which could cause our common stock to be delisted from the NASDAQ Global Market. This could result in the lack of a market for our common stock, cause a decrease in the value of our common stock, and adversely affect our business, financial condition and results of operations.

On June 4, 2008, we effected a one-for-three reverse split of our common stock. We effected the reverse split to regain compliance with NASDAQ Marketplace Rules, particularly the minimum $1.00 per share requirement for continued inclusion on the NASDAQ Global Market. Though the per share price of our common stock was $3.43 on February 28, 2011, the price has fluctuated significantly and was below $1.00 as recently as May 6, 2009. We cannot guarantee that it will remain at or above $1.00 per share and if the price again drops below $1.00 per share, the stock could become subject to delisting again, and we may seek shareholder approval for an additional reverse split. A second reverse split could produce adverse effects and may not result in a long-term or permanent increase in the price of our common stock. In addition to the minimum $1.00 per share requirement, NASDAQ Global Market also requires satisfaction of one of the following in addition to certain other requirements: (i) a minimum of $50.0 million in total asset value and $50.0 million in revenues (in the latest fiscal year or in two of the last three fiscal years), (ii) a minimum of $50.0 million in market value of listed securities, or (iii) or a minimum of $10.0 million in stockholders’ equity. At December 31, 2010, although not required because our shareholders’ equity was in excess of $10.0 million, we achieved a $50.0 million total asset value by making a non-formula advance on our short-term line of credit. As recently as December 31, 2008, however, our shareholders’ equity was below $10.0 million and in the future we may be unable to meet these continued listing requirements and our stock could become subject to delisting.

If our common stock is delisted, trading of the stock will most likely take place on an over-the-counter market established for unlisted securities. An investor is likely to find it less convenient to sell, or to obtain accurate quotations in seeking to buy, our common stock on an over-the-counter market, and many investors may not buy or sell our common stock due to difficulty in accessing over-the-counter markets, or due to policies preventing them from trading in securities not listed on a national exchange or other reasons. For these reasons and others, delisting would adversely affect the liquidity, trading volume and price of our common stock, causing the value of an investment in us to decrease and having an adverse effect on our business, financial condition and results of operations by limiting our ability to attract and retain qualified executives and employees and limiting our ability to raise capital.

The anti-takeover provisions of Oregon law and in our articles of incorporation could adversely affect the rights of the holders of our common stock by preventing a sale or takeover of us at a price or prices favorable to the holders of our common stock.

Provisions of our articles of incorporation and bylaws and provisions of Oregon law may have the effect of delaying or preventing a merger or acquisition of us, making a merger or acquisition of us less desirable to a potential acquirer or preventing a change in our management, even if our shareholders consider the merger, acquisition or change in management favorable or if doing so would benefit our shareholders. In addition, these provisions could limit the price that investors would be willing to pay in the future for shares of our common stock. The following are examples of such provisions in our articles of incorporation or bylaws:

 

25


Table of Contents
   

our board of directors is authorized, without prior shareholder approval, to change the size of the board (our articles of incorporation provide that if the board is increased to eight or more members, the board will be divided into three classes serving staggered terms, which would make it more difficult for a group of shareholders to quickly change the composition of our board);

 

   

our board of directors is authorized, without prior shareholder approval, to create and issue preferred stock with voting or other rights or preferences that could impede the success of any attempt to acquire us or to effect a change of control, commonly referred to as “blank check” preferred stock;

 

   

members of our board of directors can be removed only for cause and at a meeting of shareholders called expressly for that purpose, by the vote of 75 percent of the votes then entitled to be cast for the election of directors; and

 

   

our board of directors may alter our bylaws without obtaining shareholder approval; and shareholders are required to provide advance notice for nominations for election to the board of directors or for proposing matters to be acted upon at a shareholder meeting.

 

Item 1B. Unresolved Staff Comments.

Not applicable.

 

Item 2. Properties.

We lease facilities around the world to house our engineering, sales, sales support, administrative and operations functions. We do not own any of our facilities. As a result of our prior restructuring plans we consolidated office space and sublease portions of our facilities. At December 31, 2010, our major facilities consisted of the following:

 

Location

   Function(s)    Total Square
Feet Leased
   Square Feet
Utilized
   Square Feet
Subleased
   Lease Expiration    Sublease
Expiration

China

   Engineering; sales;
customer support
   48,000    48,000    —      Various dates
through
May 2013
   —  

California

   Administration;
engineering; sales
   37,000    23,000    14,000    June 2013    June 2013

Taiwan

   Customer support; sales;
operations; engineering
   22,000    22,000    —      Various dates
through
November 2011
   —  

Oregon

   Administration    5,000    5,000    —      November 2013    —  

Japan

   Sales; customer support    4,000    4,000    —      Various dates
through
January 2013
   —  

Washington

   None; fully subleased    10,000    —      10,000    October 2011    October 2011

 

Item 3. Legal Proceedings.

For a discussion of legal proceedings, see “Note 7: Commitments and Contingencies” in Part II, Item 8 of this Annual Report on Form 10-K.

 

Item 4. (Removed and Reserved).

 

26


Table of Contents

PART II

 

Item 5. Market for Registrant’s Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities.

Market for Registrant’s Common Equity and Related Stockholder Matters

Our common stock is listed for trading on the NASDAQ Global Market under the symbol “PXLW”. Our stock began trading on May 19, 2000. The following table sets forth, for the periods indicated, the highest and lowest sales prices of our common stock as reported on the NASDAQ Global Market.

 

Fiscal 2010

       High              Low      

Fourth Quarter

   $ 3.91       $ 3.15   

Third Quarter

     3.62         2.62   

Second Quarter

     5.78         2.98   

First Quarter

     5.87         2.97   

Fiscal 2009

   High      Low  

Fourth Quarter

   $ 4.09       $ 2.15   

Third Quarter

     4.06         1.25   

Second Quarter

     1.97         0.56   

First Quarter

     0.84         0.37   

As of February 28, 2011, there were 62 shareholders of record of our common stock and the last per share sales price of the common stock on that date was $3.43. The number of beneficial owners of our common stock is substantially greater than the number of shareholders of record because a significant portion of our outstanding common stock is held in broker “street name” for the benefit of individual investors.

Our financial covenants may limit our ability to pay dividends. There is no assurance as to the payment of future dividends as they are dependent upon future earnings, capital requirements, our operating and financial condition and approval by our board of directors. To date, we have not declared any cash dividends and we currently expect to retain any earnings to finance the expansion and development of our business.

 

27


Table of Contents

Performance Graph

Set forth below is a graph that compares the cumulative total shareholder return on our common stock with the cumulative total return on the NASDAQ Stock Market (U.S.) Index and the NASDAQ Electronics Components Index over the five-year period ended December 31, 2010. The graph assumes that $100 was invested on December 31, 2005 in our common stock, the NASDAQ Stock Market (U.S.) Index and the NASDAQ Electronics Components Index. In accordance with guidelines of the Securities and Exchange Commission, the shareholder return for each entity in the peer group index has been weighted on the basis of market capitalization. The stock price performance in the graph is not intended to forecast or indicate future stock price performance.

COMPARISON OF FIVE-YEAR CUMULATIVE TOTAL RETURN

AMONG PIXELWORKS, INC., THE NASDAQ STOCK MARKET (U.S.)

INDEX AND THE NASDAQ ELECTRONICS COMPONENTS INDEX

LOGO

 

28


Table of Contents
Item 6. Selected Financial Data.

The following consolidated selected financial data is not necessarily indicative of results of future operations and should be read in conjunction with Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operation, and the Consolidated Financial Statements and notes thereto in Item 8. Financial Statements and Supplementary Data.

 

     Year Ended December 31,  
     2010     2009     2008     2007     2006  
     (In thousands, except per share data)  

Consolidated Statement of Operations Data

          

Revenue, net

   $    69,529      $    61,093      $    85,164      $  105,980      $ 133,607   

Cost of revenue

     37,366        33,798        42,963        59,273        107,506   
                                        

Gross profit

     32,163        27,295        42,201        46,707        26,101   

Operating expenses:

          

Research and development

     22,810        20,075        26,512        38,792        57,019   

Selling, general and administrative

     15,167        13,745        17,945        25,437        35,053   

Restructuring

     94        235        1,589        13,285        13,316   

Amortization of acquired intangible assets

                   164        359        602   

Impairment loss on goodwill

                                 133,739   

Impairment loss on acquired intangible assets

                                 1,753   
                                        

Total operating expenses

     38,071        34,055        46,210        77,873        241,482   
                                        

Loss from operations

     (5,908     (6,760     (4,009     (31,166     (215,381

Interest and other income, net

     886        12,338        11,979        2,483        10,254   
                                        

Income (loss) before income taxes

     (5,022     5,578        7,970        (28,683     (205,127

Provision (benefit) for income taxes

     (5,395     (877     (8     2,237        (949
                                        

Net income (loss)

   $ 373      $ 6,455      $ 7,978      $ (30,920   $ (204,178
                                        

Net income (loss) per share:

          

Basic

   $ 0.03      $ 0.48      $ 0.55      $ (1.92   $ (12.69
                                        

Diluted

   $ 0.03      $ 0.47      $ 0.55      $ (1.92   $ (12.69
                                        

Weighted average shares outstanding:

          

Basic

     13,442        13,318        14,399        16,069        16,096   
                                        

Diluted

     14,384        13,687        14,410        16,069        16,096   
                                        

 

     December 31,  
     2010      2009      2008      2007     2006  
     (In thousands)  

Consolidated Balance Sheet Data

             

Cash and cash equivalents

   $    16,872       $    17,797       $    53,149       $ 74,572      $ 63,095   

Short-and long-term marketable securities

     12,969         13,062         10,168         44,385        71,489   

Working capital

     8,072         25,359         61,947          112,360         108,169   

Total assets

     52,414         56,078         91,732         161,916        207,771   

Long-term liabilities, net of current portion

     5,635         26,703         73,250         151,871        147,414   

Total shareholders’ equity (deficit)

     13,931         13,073         4,711         (8,027     21,948   

 

29


Table of Contents
Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operation.

Overview

We are an innovative designer, developer and marketer of video and pixel processing semiconductors and software for high-end digital video applications and hold 138 patents related to the visual display of digital image data. Our solutions enable manufacturers of digital display and projection devices, such as large-screen flat panel televisions and digital front projectors, to manufacture their products with a consistently high level of video quality, regardless of the content’s source or format. Our core technology leverages unique proprietary techniques for intelligently processing video signals from a variety of sources to ensure that all resulting images are optimized. Additionally, our products help our customers reduce costs and differentiate their display and projection devices, an important factor in industries that experience rapid innovation. Pixelworks was founded in 1997 and is incorporated under the laws of the state of Oregon.

Pixelworks’ flexible design architecture enables our technology to produce outstanding image quality in our customers’ products with a range of single-purpose integrated circuits (“ICs”), to system-on-chip (“SoC”) ICs that integrate microprocessor, memory and image processing functions. Additionally, we provide full solutions, including a software development environment and operating system, which enable our customers to more quickly develop and customize their display products, thus reducing their time to market and allowing them to incorporate differentiated features and functions.

Our primary target markets are liquid crystal display (“LCD”) large-screen televisions and 3LCD and digital light processing (“DLP”) digital front projectors, however we also target other segments within the flat panel display market, including digital signage.

We have adopted a product strategy that leverages our core competencies in video processing to address the evolving needs of the advanced flat panel display, digital projection and other markets that require superior image quality. We focus our product investments on developing video enhancement solutions for these markets, with particular focus on adding increased performance and functionality. Additionally, we look for ways to leverage our research and development investment into products that address other high-value markets where our innovative proprietary technology provides differentiation for us and our customers. We continually seek to expand our technology portfolio through internal development, co-development with business partners and evaluation of acquisition opportunities.

Historically, significant portions of our revenue have been generated by sales to a relatively small number of end customers and distributors. We sell our products worldwide through a direct sales force, distributors and manufacturers’ representatives. We sell to distributors in Japan, Taiwan, China, Korea, Europe, Southeast Asia and the U.S, and our manufacturers’ representatives support some of our Korean and European sales. Our distributors typically provide engineering support to our end customers and often have valuable and established relationships with our end customers. In certain countries in which we operate, it is customary to sell to distributors. While distributor payment to us is not dependent upon the distributor’s ability to resell the product or to collect from the end customer, the distributors may provide longer payment terms to end customers than those we would offer.

Significant portions of our products are sold overseas. Sales outside the U.S. accounted for approximately 96%, 97% and 95% of revenue in 2010, 2009 and 2008, respectively. Our integrators, branded manufacturers and branded suppliers incorporate our products into systems that are sold worldwide. All of our revenue to date has been denominated in U.S. dollars.

Factors Affecting Results of Operations and Financial Condition

Financial, commercial and consumer markets experienced significant disruption during the last quarter of 2008 and throughout 2009 which adversely affected our results of operations during 2009. We responded to the

 

30


Table of Contents

economic downturn by initiating a restructuring plan in December 2008 to reduce our operating expenses by reducing operations, research and development and administrative headcount in our San Jose, Taiwan and China offices as well as implementing other cost reduction efforts, including company-wide salary reductions during the second and third quarters of 2009. During the first three quarters of 2010 we experienced an increase in revenue as customer demand strengthened as a result of improvements in the world wide economy. Although the macroeconomic environment and our business appeared to have stabilized since early 2009, in the fourth quarter of 2010 our revenue decreased due in part to inventory corrections by our customers as a result of weakening consumer demand. Additionally, consumer confidence and spending remain cautious and we are unable to predict how the challenging global economic environment may impact our future results of operations and financial position.

Results of Operations

Year ended December 31, 2010 compared with year ended December 31, 2009, and year ended December 31, 2009 compared with year ended December 31, 2008.

Revenue, net

Net revenue was as follows (in thousands):

 

     Year ended December 31,      2010 v. 2009     2009 v. 2008  
     2010      2009      2008      $ change      %change     $ change     %change  

Revenue, net

   $ 69,529       $ 61,093       $ 85,164       $ 8,436         14   $ (24,071     (28 )% 

2010 v. 2009

Net revenue increased $8.4 million, or 14%, from 2009 to 2010. The increase was attributable to a 10% increase in units sold and a 4% increase in average selling price (“ASP”). The increase in units sold resulted primarily from increased sales of our new digital projector products, including increased sales in the DLP division of the digital projector market, as customer demand strengthened during 2010 as a result of improvements in the world wide economy. The increase was partially offset by a decrease in sales of our Motion Estimation Motion Compensation (“MEMC”) co-processor ICs as we transitioned customers to our next generation MEMC co-processor ICs. The increase in ASP was primarily the result of an increase in the percentage of total revenue from the digital projector market, which generally has higher ASPs than our other products.

2009 v. 2008

Net revenue decreased $24.1 million, or 28%, from 2008 to 2009 as the result of a 30% decrease in units sold, partially offset by a 3% increase in ASP. The decrease in units sold during 2009 compared to 2008 resulted primarily from weakened customer demand due to the worldwide economic downturn, particularly during the first half of 2009. Decreased revenue also resulted from lower sales of our legacy products, including those we acquired in our acquisition of Equator Technologies, Inc. (“Equator”) in June 2005, and lower sales into markets which we no longer pursue. These decreases were partially offset by an increase in sales of our MEMC co-processor ICs, and our next generation projector image processors.

We did experience some recovery in revenue levels in the second half of 2009 compared to the first half of 2009 as the worldwide economy strengthened. Our most significant recovery was in digital projector market sales, which were up slightly from the second half of 2008 to the second half of 2009, compared with a decrease of 50% from the first half of 2008 to the first half of 2009. Revenue from our advanced television market, which includes the panel market and our MEMC co-processor ICs, was approximately flat from the second half of 2008 to the second half of 2009, an improvement over the 24% decrease from the first half of 2008 to the first half of 2009. Our revenue from other markets did not experience a recovery during the second half of 2009, compared to the second half of 2008, primarily due to consistent decreases in unit sales of legacy products in markets which we no longer pursue.

 

31


Table of Contents

Cost of revenue and gross profit

Cost of revenue and gross profit were as follows (in thousands):

 

     Year ended December 31,  
     2010      % of
 revenue 
    2009      % of
 revenue 
    2008      % of
 revenue 
 

Direct product costs and related overhead 1

   $ 34,629         50   $ 30,630         50   $ 39,362         46

Amortization of acquired intangible assets

     1,050         2        2,336         4        2,820         3   

Inventory charges 2

     1,543         2        518         1        488         1   

Other cost of revenue 3

     144         0        314         0        293         0   
                                 

Total cost of revenue

   $ 37,366         54   $ 33,798         55   $ 42,963         50
                                 

Gross profit

   $ 32,163         46   $ 27,295         45   $ 42,201         50
                                 

 

1

Includes purchased materials, assembly, test, labor, employee benefits, warranty expense and royalties.

2

Includes the net provision for inventory reserves and lower of cost or market write-downs.

3

Includes restructuring, stock-based compensation and additional amortization of non-cancelable prepaid royalty.

2010 v. 2009

Total cost of revenue decreased to 54% of revenue in 2010 from 55% of revenue in 2009. The decrease was primarily attributable to the decrease in amortization expense for acquired intangible assets that were fully amortized as of the second quarter of 2010. The decrease is partially offset by an increase in inventory charges as we transitioned customers to our next generation products. Direct product costs as a percentage of revenue remained flat in 2010 primarily due to favorable overhead cost absorption as a result of increased revenue without corresponding increases in our fixed costs, offset by a higher mix of our new products which have higher material costs than our legacy products.

We expect future cost improvements on our MEMC products and next generation projector processors as we continue to ramp production and realize production efficiencies; however, we are unable to predict the timing and extent of expected cost improvements.

2009 v. 2008

Total cost of revenue increased to 55% of revenue in 2009 from 50% of revenue in 2008. The increase was primarily attributable to an increase in direct product costs due to changes in the mix of products sold, including increased sales of our MEMC products and next generation projector processors and decreased sales of our legacy Equator products. Gross profit margins also decreased due to the impact of lower overhead cost absorption due to decreased revenue without corresponding reductions in our fixed costs.

Research and development

Research and development expense includes compensation and related costs for personnel, development-related expenses including non-recurring engineering and fees for outside services, depreciation and amortization, expensed equipment, facilities and information technology expense allocations and travel and related expenses.

Research and development expense was as follows (in thousands):

 

     Year ended December 31,      2010 v. 2009     2009 v. 2008  
     2010      2009      2008      $ change      %change     $ change     %change  

Research and development

   $ 22,810       $ 20,075       $ 26,512       $ 2,735         14   $ (6,437     (24 )% 

 

32


Table of Contents

2010 v. 2009

Research and development expense increased $2.7 million, or 14%, from 2009 to 2010. This increase is primarily attributable to the following:

 

   

Compensation expense increased $1.2 million as a result of:

 

   

the elimination of a Company-wide salary reduction that was in effect during the second and third quarters of 2009;

 

   

an increase in the number of research and development employees; and

 

   

annual merit salary increases granted during the year.

 

   

Depreciation and amortization expense, software maintenance expense and expensed equipment and software increased $0.7 million as a result of an increase in engineering software tools, and our purchase of additional equipment during 2010.

 

   

Non-recurring engineering and outside services increased $0.6 million due to an increase in new product development.

2009 v. 2008

Research and development expense decreased $6.4 million, or 24%, from 2008 to 2009. This decrease was primarily attributable to the restructuring efforts that we initiated in November 2006 and December 2008, and which were completed in the fourth quarter of 2008 and second quarter of 2009, respectively. These efforts resulted in the following reductions in research and development expenses:

 

   

Depreciation and amortization expense, software maintenance expense and expensed equipment and software decreased $2.7 million. This decrease resulted from fewer engineering software tools due to changes in product development strategy as well as decreased amortization from certain licensed technology which became fully amortized during the first and second quarters of 2009.

 

   

Compensation expense decreased $1.9 million as a result of:

 

   

a Company-wide 10% salary reduction that was in effect during the second and third quarters of 2009;

 

   

a reduced senior management bonus for 2009 compared to 2008; and

 

   

continuous improvement in our engineering practices to lower costs and improve efficiency.

 

   

Stock-based compensation expense decreased $0.8 million due to personnel reductions and reduced valuation of our stock options.

 

   

Facilities and information technology expense allocations decreased $0.7 million, primarily due to reductions in rent and decreased depreciation of equipment and leasehold improvements.

Selling, general and administrative

Selling, general and administrative expense includes compensation and related costs for personnel, sales commissions, facilities and information technology expense allocations, travel, outside services and other general expenses incurred in our sales, marketing, customer support, management, legal and other professional and administrative support functions. Selling, general and administrative expense was as follows (in thousands):

 

     Year ended December 31,      2010 v. 2009     2009 v. 2008  
     2010      2009      2008      $ change      %change     $ change     %change  

Selling, general and administrative

   $ 15,167       $ 13,745       $ 17,945       $ 1,422         10   $ (4,200     (23 )% 

 

33


Table of Contents

2010 v. 2009

Selling, general and administrative expense increased $1.4 million, or 10%, from 2009 to 2010. The increase in selling, general and administrative expense is primarily attributable to the following:

 

   

Compensation expense increased $0.7 million as a result of:

 

   

elimination of a Company-wide salary reduction in effect during the second and third quarters of 2009;

 

   

an increase in the number of sales, general and administrative employees; and

 

   

annual merit salary increases granted during the year.

 

   

Travel related expense increased $0.3 million.

2009 v. 2008

Selling, general and administrative expense decreased $4.2 million, or 23%, from 2008 to 2009. The decrease in selling, general and administrative expense from 2008 to 2009 is primarily attributable to the restructuring efforts that we initiated in November 2006 and December 2008, and which were completed in the fourth quarter of 2008 and second quarter of 2009, respectively. These efforts resulted in the following reductions in selling, general and administrative expenses:

 

   

Compensation expense decreased $1.6 million as a result of:

 

   

a Company-wide 10% salary reduction that was in effect during the second and third quarters of 2009;

 

   

a reduced senior management bonus for 2009 compared to 2008; and

 

   

headcount reductions during 2009.

 

   

Stock-based compensation expense decreased $0.7 million due to personnel reductions and reduced valuation of our stock options.

 

   

Facilities and information technology allocations decreased $0.5 million, primarily due to reductions in headcount, outsourced IT support, lower rent and decreased equipment depreciation.

 

   

Sales commissions decreased $0.5 million primarily due to lower sales volume.

Restructuring

Restructuring expense was comprised of the following amounts (in thousands):

 

     Year ended December 31,  
     2010      2009      2008  

Termination and retention benefits 1

   $       $      118       $   1,172   

Consolidation of leased space 2

     94         160         508   
                          

Total restructuring expenses

   $        94       $ 278       $ 1,680   
                          

Included in cost of sales

   $       $ 43       $ 91   

Included in operating expenses

     94         235         1,589   

 

1

Includes severance payments for terminated employees in 2009 and 2008 and retention payments for certain continuing employees in 2008.

2

Expenses related to the consolidation of leased space including future non-cancelable rent payments due for vacated space (net of estimated sublease income) and related professional fees.

In December 2008, we initiated a restructuring plan to reduce our operating expenses in response to decreases in current and forecasted revenue which resulted from global economic uncertainty. The plan reduced operations, research and development and administrative headcount in our San Jose, Taiwan and China offices, and was completed during the second quarter of 2009. All termination benefits recorded during 2009 were attributable to the plan initiated in December 2008.

 

34


Table of Contents

In November 2006, we initiated a restructuring plan that included consolidation of our operations in order to reduce compensation and rent expense, while at the same time making critical infrastructure investments in people, processes and information systems to improve our operating efficiency. Although this plan was completed in the fourth quarter of 2008, lease termination costs were recorded in 2010 and 2009 due to decreases in estimated future sublease income and related professional fees.

Other income, net

Net other income consisted of the following (in thousands):

 

     Year ended December 31,     $ change  
         2010             2009             2008           2010 v. 2009         2009 v. 2008    

Gain on sale of marketable securities

   $ 1,397      $      $      $ 1,397      $   

Interest income (expense) and other, net 1

     (511     (522     199        11        (721

Gain on repurchase of long-term debt, net 2

            12,860        19,670        (12,860     (6,810

Other-than-temporary impairment of

          

marketable securities, net 3

                   (7,890            7,890   
                                        

Total other income, net

   $ 886      $ 12,338      $ 11,979      $ (11,452   $ 359   
                                        

 

1

Interest income (expense) and other, net primarily relates to interest payable on our 1.75% convertible subordinated debentures (the “debentures”). The decrease in 2009 is due to the reduced outstanding principal balance which resulted from our repurchases of our debentures during the first half of 2009. This line also includes interest income from our cash and investments and amortization of debt issuance costs.

 

2

In 2009, we repurchased and retired $44.9 million of our debentures for a net gain of $12.9 million. In 2008, we repurchased and retired $79.4 million of our debentures for a net gain of $19.7 million.

 

3

In 2008, we recognized an other-than-temporary impairment of $7.9 million on an investment in a publicly-traded equity security, due to the duration of time that the investment had been below cost, as well as decreased target price estimates, analyst downgrades and macroeconomic factors.

Benefit for income taxes

The benefit for income taxes was as follows (in thousands):

 

     Year ended December 31,  
     2010     2009     2008  

Benefit for income taxes

   $ (5,395   $    (877   $        (8

The income tax benefit recorded for the years ended December 31, 2010 and 2009 of $5.4 million and $0.9 million, respectively was primarily due to the reversal of previously recorded tax contingencies due to the expiration of the applicable statutes of limitation, partially offset by current and deferred tax expense in profitable cost-plus foreign jurisdictions. The income tax benefit recorded for the year ended December 31, 2008 is comprised of current and deferred tax expense in profitable foreign jurisdictions and accruals for tax contingencies in foreign jurisdictions, offset by a benefit of $0.9 million for refundable research and experimentation credits and a benefit of $0.6 million for the reversal of a previously recorded tax contingency due to the expiration of the applicable statute of limitations.

At December 31, 2010, we continued to provide a full valuation allowance against our U.S. and Canadian deferred tax assets as we do not believe that it is more likely than not that we will realize those assets due to the inability to generate sufficient taxable income necessary to utilize the benefit of the deferred tax assets. We did not record a valuation allowance against our other foreign deferred tax assets as we believe that it is more likely than not that we will realize a benefit from those assets.

 

35


Table of Contents

As of December 31, 2010, we have federal, state and foreign net operating loss carryforwards of approximately $173.1 million, $73.5 million and $0.4 million, respectively, which will expire between 2011 and 2027. As of December 31, 2010, we have available federal, state and foreign research and experimentation tax credit carryforwards of approximately $7.2 million, $2.4 million and $1.9 million, respectively, which begin expiring in 2011. We have a general foreign tax credit of $2.8 million which will begin expiring in 2018.

Business Outlook

On January 27, 2011, we provided an outlook for the first quarter of 2011 in our earnings release, which was furnished on a current report on Form 8-K. The outlook provided the following anticipated financial results prepared in accordance with U.S. generally accepted accounting principles:

 

   

First quarter revenue of $14.5 million to $16.5 million.

 

   

Gross profit margin of approximately 44% to 48%.

 

   

Operating expenses of $9.5 million to $10.5 million.

Liquidity and Capital Resources

Cash and short- and long-term marketable securities

Our cash and cash equivalent and short- and long-term marketable securities were as follows (in thousands):

 

     December 31,      $ Change  
     2010      2009      2008      2010 v. 2009     2009 v. 2008  

Cash and cash equivalents

   $ 16,872       $ 17,797       $ 53,149       $ (925   $ (35,352

Short-term marketable securities

     12,366         9,822         8,058         2,544        1,764   

Long-term marketable securities

     603         3,240         2,110         (2,637     1,130   
                                           

Total cash and marketable securities

   $ 29,841       $ 30,859       $ 63,317       $   (1,018   $ (32,458
                                           

Total cash and marketable securities decreased $1.0 million from 2009 to 2010. The decrease resulted primarily from $3.0 million in payments on property and equipment and other asset financing and $2.3 million for purchases of property and equipment and other assets. These decreases were partially offset by $0.6 million generated by operating activities, $0.5 million of realized and unrealized gains on marketable securities and a $3.0 million non-formula advance on our short-term line of credit, as discussed below under Capital Resources. Excluding the non-formula advance, our cash and marketable securities would have decreased $4.0 million from 2009 to 2010.

Total cash and marketable securities decreased $32.5 million from 2008 to 2009. The decrease resulted primarily from $31.5 million used for the repurchase of long-term debt, $2.2 million in payments on property and equipment and other asset financing and $1.6 million used for purchases of property and equipment and other long-term assets. The decreases were partially offset by $2.0 million of positive cash flow from operations and a $1.1 million increase in the valuation of our long-term marketable security.

At December 31, 2010, cash equivalents and short-term marketable securities included $14.1 million in money market funds and certificates of deposit, $5.5 million in U.S. government agencies debt securities, $6.9 million in commercial paper, and $1.6 million in corporate debt securities. At December 31, 2010, we also held a $0.6 million long-term strategic equity investment in a publicly traded corporation. All of our investments were denominated in U.S. dollars, and our portfolio did not contain direct exposure to subprime mortgages or structured vehicles that derive their value from subprime collateral.

The quality of our short-term investment portfolio remains high during this difficult credit environment. Our investment policy requires that our portfolio maintains a weighted average maturity of less than 12 months.

 

36


Table of Contents

Additionally, no maturities can extend beyond 24 months and concentrations with individual securities are limited. Investments must be rated at least A-1 / P-1 by Standard & Poor’s / Moody’s, and our investment policy is reviewed at least annually by our Audit Committee.

The valuations of our short-term marketable securities are affected by a variety of factors, including changes in interest rates and the actual or perceived financial stability of the issuer. However, due to the high quality of our investments and their short-term nature, there has not been, and we do not expect there to be, a significant fluctuation in the valuation of these investments. Accordingly, we do not expect a materially negative impact on our financial condition from fluctuations in the value of our short-term investments. As of December 31, 2010, we had a nominal unrealized gain on these investments.

The valuation of our long-term equity investment has fluctuated significantly and during the year ended December 31, 2008, we recorded other-than-temporary impairments of $7.9 million, decreasing our cost basis from $10.0 million to $2.1 million as of December 31, 2008. During the year ended December 31, 2010, we sold $1.8 million of our long-term equity investment for gross proceeds of $3.2 million and realized gains of $1.4 million. Our remaining cost basis in the investment at December 31, 2010 was $0.3 million.

Accounts receivable, net

Net accounts receivable decreased to $4.5 million at December 31, 2010 from $5.6 million at December 31, 2009. Average number of days sales outstanding increased to 29 days at December 31, 2010 from 26 days at December 31, 2009.

Inventories, net

Net inventories decreased to $4.9 million at December 31, 2010 from $6.2 million at December 31, 2009. Inventory turnover decreased to 5.8 at December 31, 2010 from 7.0 at December 31, 2009. The Company calculates inventory turnover using annualized operating results and inventory balances for the fourth quarter.

Capital resources

On December 21, 2010, we entered into a Loan and Security Agreement (the “Revolving Loan Agreement”) with Silicon Valley Bank (the “Bank”). The Revolving Loan Agreement provides for a secured working capital-based revolving line of credit (the “Revolving Line”) in an aggregate amount of up to the lesser of (i) $10.0 million, or (ii) 80% of eligible domestic accounts receivable and certain foreign accounts receivable. In addition, the Revolving Loan Agreement provides for non-formula advances of up to $10.0 million which may be made solely during the last five business days of any fiscal month or quarter and which must be repaid by the Company on or before the fifth business day after the applicable fiscal month or quarter end. Due to their repayment terms, non-formula advances do not provide the Company with usable liquidity and are utilized by the Company in order to maintain a $50.0 million total asset value.

The Revolving Loan Agreement contains customary affirmative and negative covenants, including with respect to the following: compliance with laws, provision of financial statements and periodic reports, payment of taxes, maintenance of inventory and insurance, maintenance of operating accounts at the Bank, the Bank’s access to collateral, formation or acquisition of subsidiaries, incurrence of indebtedness, dispositions of assets, granting liens, changes in business, ownership or business locations, engaging in mergers and acquisitions, making investments or distributions and affiliate transactions. The covenants also require that the Company maintain a minimum ratio of qualifying financial assets to the sum of qualifying financial obligations.

The Revolving Loan Agreement also contains customary events of default, including the following: defaults with respect to covenant compliance, the occurrence of a material adverse change, the occurrence of certain bankruptcy or insolvency events, cross-defaults, judgment defaults and material misrepresentations. The

 

37


Table of Contents

occurrence of an event of default could result in the acceleration of the Company’s obligations under the Revolving Loan Agreement and an increase to the applicable interest rate, and would permit the Bank to exercise remedies with respect to its security interest.

To secure the repayment of any amounts borrowed under the Revolving Loan Agreement, the Company granted to the Bank a security interest in substantially all of its assets, which assets do not include its intellectual property assets. The Company has agreed not to pledge or otherwise encumber its intellectual property assets without prior written permission from the Bank.

In 2004, we issued $150.0 million of 1.75% convertible subordinated debentures due 2024. In 2006, we repurchased and retired $10.0 million principal amount of the debentures. In 2008, we repurchased and retired $79.4 million principal amount of the debentures for $58.6 million in cash. In 2009, we repurchased and retired $44.9 million principal amount of the debentures for $31.5 million in cash, reducing the balance of our outstanding debentures to $15.8 million.

We may redeem some or all of the outstanding debentures for cash on or after May 15, 2011 at a price equal to 100% of the principal amount of the debentures plus accrued and unpaid interest. The holders of the debentures have the right to require us to purchase all or a portion of the debentures outstanding at each of the following dates: May 15, 2011, May 15, 2014, and May 15, 2019, at a purchase price equal to 100% of the principal amount plus accrued and unpaid interest. The debentures are unsecured obligations and are subordinated in right of payment to all of our existing and future senior debt.

As of December 31, 2010, the debentures are classified as current liabilities as we expect the holders to require us to purchase all of the debentures on May 15, 2011. We intend to refinance or repurchase the debentures on or before May 15, 2011, which may consume a significant portion of our working capital, require the issuance of new debt on less favorable terms than our existing obligations or require the issuance of equity securities that may result in dilution to existing shareholders.

In September 2007, the Board of Directors authorized the repurchase of up to $10.0 million of the Company’s common stock under a share repurchase program that expired in September 2009. Total cumulative repurchases under the plan were $7.1 million.

Liquidity

Our cash and marketable securities totaling $29.8 million, are highly liquid with scheduled maturities prior to May 15, 2011, the date we expect to be required to repurchase our debentures. Although the repayment of our debentures would consume a significant portion of our cash and marketable securities, we anticipate that our existing working capital, as well as funds available under our Revolving Line, will be adequate to fund our operating, investing and financing needs for the next twelve months. If necessary, management will pursue financing arrangements including the issuance of debt or equity securities or will reduce expenditures, in order to meet the Company’s cash requirements. There is no assurance that, if required, we will be able to raise additional capital or reduce discretionary spending to provide the required liquidity which, in turn, may have an adverse effect on our results of operations and financial position.

From time to time, we may evaluate acquisitions of businesses, products or technologies that complement our business. Any further transactions, if consummated, may consume a material portion of our working capital or require the issuance of equity securities that may result in dilution to existing shareholders.

Critical Accounting Policies and Estimates

The preparation of financial statements in conformity with U.S. generally accepted accounting principles requires us to make estimates and judgments that affect the amounts reported. On an ongoing basis, we evaluate our estimates, including those related to product returns, warranty obligations, bad debts, inventories, property and

 

38


Table of Contents

equipment, intangible assets, impairment of long-lived assets, valuation of investments, amortization of prepaid royalties, valuation of share-based payments, income taxes, litigation and other contingencies. We base our estimates on historical experience and various other assumptions that we believe to be reasonable under the circumstances. Actual results may differ from these estimates under different assumptions or conditions.

We believe the following critical accounting policies affect our more significant judgments and estimates used in the preparation of our consolidated financial statements:

Revenue Recognition. We recognize revenue when persuasive evidence of an arrangement exists, the product has been delivered, the price is fixed and determinable, and collection is reasonably assured. We require customers to provide purchase orders prior to shipment and we consider delivery to occur upon shipment provided title and risk of loss have passed to the customer based on the shipping terms. These conditions are generally satisfied upon shipment of the underlying product.

Sales Returns and Allowances. Our customers do not have a stated right to return product except for replacement of defective products under our warranty program discussed below. However, we have accepted customer returns on a case-by-case basis as customer accommodations in the past. As a result, we provide for these returns in our reserve for sales returns and allowances. At the end of each reporting period, we estimate the reserve for returns based on historical experience and knowledge of any applicable events or transactions.

Certain of our distributors have stock rotation provisions in their distributor agreements, which allow them to return 5-10% of the products purchased in the prior six months in exchange for products of equal value. We analyze historical stock rotations at the end of each reporting period. To date, returns under the stock rotation provisions have been nominal.

Certain distributors also have price protection provisions in their distributor agreements with us. Under the price protection provisions, we grant distributors credit if they purchased product for a specific end customer and we subsequently lower the price to the end customer such that the distributor can no longer earn its negotiated margin on in-stock inventory. At the end of each reporting period, we estimate a reserve for price protection credits based on historical experience and knowledge of any applicable events or transactions. The reserve for price protection, if required, is included in our reserve for sales returns and allowances.

Product Warranties. We warrant that our products will be free from defects in materials and workmanship for a period of twelve months from delivery. Warranty repairs are guaranteed for the remainder of the original warranty period. Our warranty is limited to repairing or replacing products, or refunding the purchase price.

At the end of each reporting period, we estimate a reserve for warranty returns based on historical experience and knowledge of any applicable events or transactions. While we engage in extensive product quality programs and processes, which include actively monitoring and evaluating the quality of our suppliers, should actual product failure rates or product replacement costs differ from our estimates, revisions to the estimated warranty liability may be required.

Allowance for Doubtful Accounts. We offer credit to customers after careful examination of their creditworthiness. We maintain an allowance for doubtful accounts for estimated losses that may result from the inability of our customers to make required payments. At the end of each reporting period, we estimate the allowance for doubtful accounts based on our account-by-account risk analysis of outstanding receivable balances. If the financial condition of our customers were to deteriorate, resulting in an impairment of their ability to make payments, additional allowances may be required.

Inventory Valuation. We record a reserve against our inventory for estimated obsolete, unmarketable, and otherwise impaired products by calculating the difference between the cost of inventory and the estimated market value based upon assumptions about future demand and market conditions. We review our inventory at the end of each reporting period for valuation issues. If actual market conditions are less favorable than those we projected at the time the reserve was recorded, additional inventory write-downs may be required.

 

39


Table of Contents

Useful Lives and Recoverability of Equipment and Other Long-Lived Assets. We evaluate the remaining useful life and recoverability of equipment and other assets, including identifiable intangible assets with definite lives, whenever events or changes in circumstances indicate that the carrying amount of the assets may not be recoverable. If there is an indicator of impairment, we prepare an estimate of future, undiscounted cash flows expected to result from the use of each asset and its eventual disposition. If these cash flows are less than the carrying value of the asset, we adjust the carrying amount of the asset to its estimated fair value. While we have concluded that the carrying value of our long-lived assets is recoverable as of December 31, 2010, our analysis is dependent upon our estimates of future cash flows and our actual results may vary.

Valuation of Investments. We apply judgment in determining whether our marketable securities are other-than-temporarily impaired. When performing our evaluation, we consider the duration of the decline, future prospects of the issuer and our ability and intent to hold the security to recovery.

Stock-Based Compensation. We estimate the fair value of share-based payments using the Black-Scholes option pricing model, which requires certain estimates, including an expected forfeiture rate and expected term of options granted. We also make decisions regarding the method of calculating expected volatilities and the risk-free interest rate used in the option-pricing model. The resulting calculated fair value of share-based payments is recognized as compensation expense over the requisite service period, which is generally the vesting period. When there are changes to the assumptions used in the option-pricing model, including fluctuations in the market price of our common stock, there will be variations in the calculated fair value of the share-based payments, which results in variation in the compensation cost recognized.

Income Taxes. We record deferred income taxes for temporary differences between the amount of assets and liabilities for financial and tax reporting purposes and we record a valuation allowance to reduce our deferred tax assets to the amount that is more likely than not to be realized. We also regularly conduct a comprehensive review of our uncertain tax positions. In this regard, an uncertain tax position represents our expected treatment of a tax position taken in a filed tax return, or planned to be taken in a future tax return, that has not been reflected in measuring income tax expense for financial reporting purposes. Until these positions are sustained by the taxing authorities, we do not recognize the tax benefits resulting from such positions and report the tax effects as a liability for uncertain tax positions in our consolidated balance sheet.

Contractual Payment Obligations

A summary of our contractual obligations as of December 31, 2010 is as follows:

 

     Payments Due By Period  

Contractual Obligation

   Total      Less than
1 year
     1-3 years      3-5 years      More than
5 years
 

Operating leases 1

   $ 3,117       $ 1,690       $ 1,427       $       $   

Payments on accrued balances related to asset purchases

     3,914         2,601         1,314                   

Estimated Q1 2011 purchase commitments to contract manufacturers

     6,841         6,841                           

Other purchase obligations and commitments

     300         300            
                                            

Total 2

   $   14,172       $   11,432       $     2,741       $          —       $          —   
                                            

 

1

The operating lease payments above are net of sublease rental income of $0.4 million, $0.3 million and $0.1 million for the years ending December 31, 2011, 2012 and 2013, respectively.

 

2

We are unable to reliably estimate the timing of future payments related to uncertain tax positions; therefore, $3.6 million of income taxes payable has been excluded from the table above.

Off-Balance Sheet Arrangements

We do not have any off-balance sheet arrangements that have, or are reasonably likely to have, a material current or future effect on our financial condition, revenues or expenses, results of operations, liquidity, capital expenditures or capital resources.

 

40


Table of Contents
Item 7A. Quantitative and Qualitative Disclosures about Market Risk.

Interest Rate Risk

Interest rate fluctuations impact the interest income that we earn on our investment portfolio and the value of our investments. Factors that could cause interest rates to fluctuate include volatility in the credit and equity markets, such as the current uncertainty in global economic conditions; changes in the monetary policies of the United States and other countries and inflation. We mitigate risks associated with such fluctuations, as well as the risk of loss of principal, by investing in high-credit quality securities and limiting concentrations of issuers and maturity dates. Derivative financial instruments are not part of our investment portfolio.

During 2010 and as of December 31, 2010, substantially all of our cash equivalents and investments were held in high quality securities or money market funds with yields approaching zero, accordingly, a hypothetical decrease in interest rates would not have a significant impact on our results of operations or financial position.

As of December 31, 2010, we had convertible subordinated debentures of $15.8 million outstanding with a fixed interest rate of 1.75%. Interest rate changes affect the fair value of the debentures, but do not affect our earnings or cash flow.

Exchange Rate Risk

All of our sales and inventory purchases are denominated in U.S. dollars and, as a result, we have relatively little exposure to foreign currency exchange risk with respect to our sales or cost of goods sold. We have employees located in offices in Japan, Taiwan, Korea and the People’s Republic of China and as such, a portion of our operating expenses as well as foreign income taxes payable are denominated in foreign currencies. Accordingly, our operating results are affected by changes in the exchange rate between the U.S. dollar and those currencies. Any future strengthening of those currencies against the U.S. dollar could negatively impact our operating results by increasing our operating expenses as measured in U.S. dollars. We analyze our exposure to foreign currency fluctuations and may engage in financial hedging techniques in the future to attempt to minimize the effect of these potential fluctuations; however, foreign currency exchange rate fluctuations may adversely affect our financial results in the future.

 

Item 8.     Financial Statements and Supplementary Data.

The following financial statements and reports are included in Item 8:

 

Report of Independent Registered Public Accounting Firm

  

Consolidated Balance Sheets as of December 31, 2010 and 2009

  

Consolidated Statements of Operations for the years ended December 31, 2010, 2009 and 2008

  

Consolidated Statements of Cash Flows for the years ended December 31, 2010, 2009 and 2008

  

Consolidated Statements of Shareholders’ Equity (Deficit) and Comprehensive Income (Loss) for the years ended December 31, 2010, 2009 and 2008

  

Notes to Consolidated Financial Statements

  

 

41


Table of Contents

Report of Independent Registered Public Accounting Firm

The Board of Directors and Shareholders

Pixelworks, Inc:

We have audited the accompanying consolidated balance sheets of Pixelworks, Inc. and subsidiaries as of December 31, 2010 and 2009, and the related consolidated statements of operations, shareholders’ equity (deficit) and comprehensive income (loss), and cash flows for each of the years in the three-year period ended December 31, 2010. These consolidated financial statements are the responsibility of the Company’s management. Our responsibility is to express an opinion on these consolidated financial statements based on our audits.

We conducted our audits in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement. An audit includes examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements. An audit also includes assessing the accounting principles used and significant estimates made by management, as well as evaluating the overall financial statement presentation. We believe that our audits provide a reasonable basis for our opinion.

In our opinion, the consolidated financial statements referred to above present fairly, in all material respects, the financial position of Pixelworks, Inc. and subsidiaries as of December 31, 2010 and 2009, and the results of their operations and their cash flows for each of the years in the three-year period ended December 31, 2010, in conformity with U.S. generally accepted accounting principles.

We also have audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States), Pixelworks, Inc.’s internal control over financial reporting as of December 31, 2010, based on criteria established in Internal Control—Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission (COSO), and our report dated March 9, 2011 expressed an unqualified opinion on the effectiveness of the Company’s internal control over financial reporting.

 

/s/ KPMG LLP
Portland, Oregon
March 9, 2011

 

42


Table of Contents

PIXELWORKS, INC.

CONSOLIDATED BALANCE SHEETS

(In thousands, except share data)

 

     December 31,  
     2010     2009  

ASSETS

    

Current assets:

    

Cash and cash equivalents

   $ 16,872      $ 17,797   

Short-term marketable securities

     12,366        9,822   

Accounts receivable, net

     4,487        5,619   

Inventories, net

     4,858        6,158   

Prepaid expenses and other current assets

     2,337        2,265   
                

Total current assets

     40,920        41,661   

Long-term marketable securities

     603        3,240   

Property and equipment, net

     5,830        5,121   

Other assets, net

     5,061        5,006   

Acquired intangible assets, net

            1,050   
                

Total assets

   $ 52,414      $ 56,078   
                

LIABILITIES AND SHAREHOLDERS’ EQUITY

    

Current liabilities:

    

Accounts payable

   $ 4,804      $ 7,680   

Accrued liabilities and current portion of long-term liabilities

     8,983        8,513   

Current portion of income taxes payable

     282        109   

Short-term line of credit

     3,000          

Debentures currently payable

     15,779          
                

Total current liabilities

     32,848        16,302   

Long-term liabilities, net of current portion

     2,061        1,462   

Income taxes payable, net of current portion

     3,574        9,462   

Long-term debt

            15,779   
                

Total liabilities

     38,483        43,005   

Commitments and contingencies (Note 7)

    

Shareholders’ equity:

    

Preferred stock, $0.001 par value, 50,000,000 shares authorized, none issued

              

Common stock, $0.001 par value; 250,000,000 shares authorized, 13,566,021 and 13,403,057 shares issued and outstanding as of December 31, 2010 and 2009, respectively

     336,254        334,849   

Accumulated other comprehensive income

     167        1,087   

Accumulated deficit

     (322,490     (322,863
                

Total shareholders’ equity

     13,931        13,073   
                

Total liabilities and shareholders’ equity

   $ 52,414      $ 56,078   
                

See accompanying notes to consolidated financial statements.

 

43


Table of Contents

PIXELWORKS, INC.

CONSOLIDATED STATEMENTS OF OPERATIONS

(In thousands, except per share data)

 

     Year Ended December 31,  
     2010     2009     2008  

Revenue, net

   $ 69,529      $ 61,093      $ 85,164   

Cost of revenue (1)

     37,366        33,798        42,963   
                        

Gross profit

     32,163        27,295        42,201   

Operating expenses:

      

Research and development (2)

     22,810        20,075        26,512   

Selling, general and administrative (3)

     15,167        13,745        17,945   

Restructuring

     94        235        1,589   

Amortization of acquired intangible assets

                   164   
                        

Total operating expenses

     38,071        34,055        46,210   
                        

Loss from operations

     (5,908     (6,760     (4,009

Gain on sale of marketable securities

     1,397                 

Interest income (expense) and other, net

     (511     (522     199   

Gain on repurchase of long-term debt, net

            12,860        19,670   

Other-than-temporary impairment of marketable securities

                   (7,890
                        

Total other income, net

     886        12,338        11,979   
                        

Income (loss) before income taxes

     (5,022     5,578        7,970   

Benefit for income taxes

     (5,395     (877     (8
                        

Net income

   $ 373      $ 6,455      $ 7,978   
                        

Net income per share

      

Basic

   $ 0.03      $ 0.48      $ 0.55   
                        

Diluted

   $ 0.03      $ 0.47      $ 0.55   
                        

Weighted average shares outstanding

      

Basic

     13,442        13,318        14,399   
                        

Diluted

     14,384        13,687        14,410   
                        

 

      

(1) Includes:

      

Amortization of acquired developed technology

   $ 1,050      $ 2,336      $ 2,820   

Additional amortization of non-cancelable prepaid royalty

     84        251        144   

Stock-based compensation

     60        20        58   

Restructuring

            43        91   

(2) Includes stock-based compensation

     437        464        1,250   

(3) Includes stock-based compensation

     707        540        1,198   

See accompanying notes to consolidated financial statements.

 

44


Table of Contents

PIXELWORKS, INC.

CONSOLIDATED STATEMENTS OF CASH FLOWS

(In thousands)

 

     Year Ended December 31,  
     2010     2009     2008  

Cash flows from operating activities:

      

Net income

   $ 373      $ 6,455      $ 7,978   

Adjustments to reconcile net income to net cash provided by operating activities:

      

Reversal of uncertain tax positions

     (6,194     (1,819     (559

Depreciation and amortization

     4,537        4,607        6,700   

Gain on sale of marketable securities

     (1,397     (3       

Stock-based compensation

     1,204        1,024        2,506   

Amortization of acquired intangible assets

     1,050        2,336        2,984   

Deferred income tax expense

     247        68        291   

Amortization (accretion) on short-and long-term marketable securities

     98        24        (345

Amortization of debt issuance costs

     74        124        426   

Other non-cash tax benefit

     (26              

(Gain) loss on asset disposals

     (4     4        180   

Gain on repurchase of long-term debt, net

            (12,860     (19,670

Other-than-temporary impairment of marketable securities

                   7,890   

Write-off of assets to restructuring

                   14   

Other

     56        58        55   

Changes in operating assets and liabilities:

      

Accounts receivable, net

     1,132        530        74   

Inventories, net

     1,300        (1,177     6,284   

Prepaid expenses and other current and long-term assets, net

     1,117        931        974   

Accounts payable

     (3,106     3,389        223   

Accrued current and long-term liabilities

     (303     (2,377     (1,454

Income taxes payable

     479        672        410   
                        

Net cash provided by operating activities

     637        1,986        14,961   
                        

Cash flows from investing activities:

      

Proceeds from sales and maturities of available-for-sale marketable securities

     17,485        13,195        54,532   

Purchases of available-for-sale marketable securities

     (16,964     (15,110     (22,999

Purchases of property and equipment

     (1,795     (1,481     (2,158

Purchases of licensed technology

     (480     (102       

Proceeds from sales of property and equipment

     6        2        20   
                        

Net cash provided by (used in) investing activities

     (1,748     (3,496     29,395   
                        

Cash flows from financing activities:

      

Payments on asset financings

     (3,015     (2,161     (4,646

Proceeds from line of credit

     3,000                 

Proceeds from issuances of common stock

     201        18        47   

Repurchase of long-term debt

            (31,532     (58,554

Repurchase of common stock

            (167     (2,626
                        

Net cash provided by (used in) financing activities

     186        (33,842     (65,779
                        

Net change in cash and cash equivalents

     (925     (35,352     (21,423

Cash and cash equivalents, beginning of period

     17,797        53,149        74,572   
                        

Cash and cash equivalents, end of period

   $ 16,872      $ 17,797      $ 53,149   
                        

See accompanying notes to consolidated financial statements.

 

45


Table of Contents

PIXELWORKS, INC.

CONSOLIDATED STATEMENTS OF SHAREHOLDERS’ EQUITY (DEFICIT) AND COMPREHENSIVE INCOME (LOSS)

(In thousands, except share data)

 

     Common Stock     Exchangeable
Shares
    Accumulated
Other
Comprehensive
Income (loss)
    Comprehensive
Income (loss)
    Accumulated
Deficit
    Total
Shareholders’
Equity

(Deficit)
 
     Shares     Amount     Shares     Amount          

Balance as of December 31, 2007

     15,104,926      $ 333,934        4,009      $ 113      $ (4,778     $ (337,296   $ (8,027

Stock issued under stock option and stock purchase plans

     24,929        47                                      47   

Repurchase of common stock

     (1,625,737     (2,626                                   (2,626

Conversion of exchangeable shares into common stock

     4,009        113        (4,009     (113                       

Stock-based compensation expense

            2,506                                      2,506   

Net income

                                      $ 7,978        7,978        7,978   

Reclassification adjustment from accumulated other comprehensive income for other-than-temporary loss on marketable securities included in net income, net of tax of $0

                                 4,810        4,810               4,810   

Unrealized gain on available-for-sale securities, net of tax of $0

                                 50        50               50   

Pension adjustment, net of tax of $(7)

                                 (27     (27            (27
                      

Comprehensive income

                                      $ 12,811                 
                                                                

Balance as of December 31, 2008

     13,508,127        333,974                      55          (329,318     4,711   

Stock issued under stock option and stock purchase plans

     123,530        18                                      18   

Repurchase of common stock

     (228,600     (167                                   (167

Stock-based compensation expense

            1,024                                      1,024   

Net income

                                      $ 6,455        6,455        6,455   

Unrealized gain on available-for-sale securities, net of tax of $0

                                 1,003        1,003               1,003   

Pension adjustment, net of tax of $11

                                 29        29               29   
                      

Comprehensive income

                                      $ 7,487                 
                                                                

Balance as of December 31, 2009

     13,403,057      $ 334,849             $      $ 1,087        $ (322,863   $ 13,073   

Stock issued under stock option and stock purchase plans

     162,964        201                                      201   

Stock-based compensation expense

            1,204                                      1,204   

Net income

                                      $ 373        373        373   

Reclassification of unrealized gain upon sale of available-for-sale securities

                                 (944     (944            (944

Unrealized gain on available-for-sale securities, net of tax of $26

                                 47        47               47   

Pension adjustment, net of tax of $14

                                 (23     (23            (23
                      

Comprehensive loss

                                      $ (547              
                                                                

Balance as of December 31, 2010

     13,566,021      $ 336,254             $      $ 167        $ (322,490   $ 13,931   
                                                          

See accompanying notes to consolidated financial statements.

 

46


Table of Contents

PIXELWORKS, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

(In thousands, except share and per share data)

NOTE 1.    BASIS OF PRESENTATION

Nature of Business

We are an innovative designer, developer and marketer of video and pixel processing semiconductors and software for high-end digital video applications and hold 138 patents related to the visual display of digital image data. Our solutions enable manufacturers of digital display and projection devices, such as large-screen flat panel televisions and digital front projectors, to differentiate their products with a consistently high level of video quality, regardless of the content’s source or format. Our core technology leverages unique proprietary techniques for intelligently processing video signals from a variety of sources to ensure that all resulting images are optimized. Additionally, our products help our customers reduce costs and differentiate their display and projection devices, an important factor in industries that experience rapid innovation. Pixelworks was founded in 1997 and is incorporated under the laws of the state of Oregon.

Consolidated Financial Statements

Our consolidated financial statements include the accounts of Pixelworks and its wholly-owned subsidiaries. Intercompany accounts and transactions have been eliminated. All foreign subsidiaries use the U.S. dollar as the functional currency, and as a result, transaction gains and losses are included in the statement of operations. Transaction gains (losses) were $6, $(69) and $(121) for the years ended December 31, 2010, 2009 and 2008, respectively.

Use of Estimates

The preparation of consolidated financial statements in conformity with U.S. generally accepted accounting principles (“GAAP”) requires us to make estimates and judgments that affect amounts reported in the financial statements and accompanying notes. Our significant estimates and judgments include those related to product returns, warranty obligations, bad debts, inventories, property and equipment, intangible assets, impairment of long-lived assets, valuation of investments, amortization of prepaid royalties, valuation of share-based payments, income taxes, litigation and other contingencies. The actual results experienced could differ materially from our estimates.

Reclassifications

Certain reclassifications have been made to the 2009 and 2008 consolidated financial statements to conform with the 2010 presentation, including the reclassification of the reversal of uncertain tax positions within operating activities in the consolidated statements of cash flow.

NOTE 2.    SUMMARY OF SIGNIFICANT ACCOUNTING POLICIES

Cash and Cash Equivalents

We classify all cash and highly liquid investments with original maturities of three months or less at the date of purchase as cash and cash equivalents. Cash equivalents totaled $15,835 and $17,073 at December 31, 2010 and 2009, respectively.

Marketable Securities

Our investments in marketable securities are classified as available-for-sale. Available-for-sale securities are stated at fair value based on quoted market prices with unrealized holding gains or losses, net of tax, included in accumulated other comprehensive income, a component of shareholders’ equity. The cost of securities sold is based on the specific identification method.

 

47


Table of Contents

We periodically evaluate whether declines in fair values of our investments below their cost are other-than-temporary. This evaluation includes qualitative and quantitative factors regarding the severity and duration of the unrealized loss, the financial condition and near-term prospects of the issuer, including any specific events which may influence the operations of the issuer, and our ability and intent to hold the investment for a period of time to allow for an anticipated recovery in market value.

Short-term marketable debt securities have remaining maturities of less than twelve months.

Accounts Receivable

Accounts receivable are recorded at invoiced amount and do not bear interest when recorded or accrue interest when past due. We maintain an allowance for doubtful accounts for estimated losses that may result from the inability of our customers to make required payments. At the end of each reporting period, we estimate the allowance for doubtful accounts based on an account-by-account risk analysis of outstanding receivable balances. The determination to write-off specific accounts receivable balances is made based on likelihood of collection and past due status. Past due status is based on invoice date and terms specific to each customer.

Inventories

Inventories consist of finished goods and work-in-process, and are stated at the lower of standard cost (which approximates actual cost on a first-in, first-out basis) or market (net realizable value), net of a reserve for slow-moving and obsolete items.

Property and Equipment

Property and equipment are stated at cost. Depreciation is calculated on a straight-line basis over the estimated useful life of the assets which are generally as follows:

 

  Software   Lesser of 3 years or contractual license term   
  Equipment, furniture and fixtures   2 years   
  Tooling   2 - 4 years   
  Leasehold improvements   Lesser of lease term or estimated useful life   

The cost of property and equipment repairs and maintenance is expensed as incurred.

Acquired Intangible Assets

Intangible assets are amortized on a straight-line basis over their estimated useful lives.

Licensed Technology

We have capitalized licensed technology assets in other long-term assets. These assets are stated at cost and are amortized on a straight-line basis over the term of the license or the estimated life of the asset, if the license is not contractually limited, which is generally three to five years.

Useful Lives and Recoverability of Equipment and Other Long-Lived Assets

We evaluate the remaining useful life and recoverability of equipment and other assets, including identifiable intangible assets with definite lives, whenever events or changes in circumstances indicate that the carrying amount of the assets may not be recoverable. If there is an indicator of impairment, we prepare an estimate of future, undiscounted cash flows expected to result from the use of each asset and its eventual disposition. If these cash flows are less than the carrying value of the asset, we adjust the carrying amount of the asset to its estimated fair value.

 

48


Table of Contents

Revenue Recognition

We recognize revenue when persuasive evidence of an arrangement exists, the product has been delivered, the price is fixed and determinable, and collection is reasonably assured. We require customers to provide purchase orders prior to shipment and we consider delivery to occur upon shipment provided title and risk of loss have passed to the customer based on the shipping terms. These conditions are generally satisfied upon shipment of the underlying product.

There are no customer acceptance provisions associated with our products, and except for replacement of defective products under our warranty program discussed below, we have no obligation to accept product returns from end customers; however, we have accepted returns on a case-by-case basis as customer accommodations in the past. As a result, we provide for estimated reductions to gross profit for these sales returns in our reserve for sales returns and allowances. At the end of each reporting period, we estimate the reserve based on historical experience and knowledge of any applicable events or transactions. The reserve is included in accrued liabilities in our consolidated balance sheet.

A portion of our sales are made to distributors under agreements that grant the distributor limited stock rotation rights and price protection on in-stock inventory. The stock rotation rights allow these distributors to exchange a limited amount of their in-stock inventory for other Pixelworks product. We analyze historical stock rotations at the end of each reporting period. To date, returns under the stock rotation provision have been nominal, and as a result, we have not recorded a reserve for stock rotations.

Under price protection provisions, we grant distributors credit if they purchased product for a specific end customer and we subsequently lower the price to the end customer such that the distributor can no longer earn its negotiated margin on in-stock inventory. At the end of each reporting period, we estimate a reserve for price protection credits based on historical experience and knowledge of any applicable events or transactions. The reserve for price protection, if required, is included in our reserve for sales returns and allowances, which is included in accrued liabilities in our consolidated balance sheet.

Warranty Program

We warrant that our products will be free from defects in material and workmanship for a period of twelve months from delivery. Warranty repairs are guaranteed for the remainder of the original warranty period. Our warranty is limited to repairing or replacing products, or refunding the purchase price. At the end of each reporting period, we estimate a reserve for warranty returns based on historical experience and knowledge of any applicable events or transactions. The reserve for warranty returns is included in accrued liabilities in our consolidated balance sheet.

Stock-Based Compensation

We currently sponsor a stock incentive plan that allows for issuance of employee stock options and restricted stock awards, including restricted stock units. We also have an employee stock purchase plan for all eligible employees. The fair value of share-based payment awards is expensed straight-line over the requisite service period, which is generally the vesting period, for the entire award. If we were to modify any awards, additional charges would be taken.

The fair values of our stock option grants and purchase rights under our employee stock purchase plan are estimated as of the grant date using the Black-Scholes option valuation model which is affected by our estimates of the risk free interest rate, our expected dividend yield, expected term and the expected share price volatility of our common shares over the expected term. The fair values of our restricted stock awards are based on the market value of our stock on the date of grant, adjusted for the effect of estimated forfeitures.

 

49


Table of Contents

Research and Development

Costs associated with research and development activities are expensed as incurred, except for materials with alternate future uses which are capitalized and depreciated over their estimated useful life.

Interest Income (Expense) and Other, net

Interest income (expense) and other, consists of the following:

 

     Year Ended December 31,  
     2010     2009     2008  

Interest income

   $       63      $     242      $ 2,102   

Interest expense

     (500     (640     (1,695

Amortization of debt issuance costs

     (74     (124     (426

Other income

                   218   
                        
   $ (511   $ (522   $ 199   
                        

Income Taxes

We account for income taxes under the asset and liability method. This approach requires the recognition of deferred tax assets and liabilities for the expected future tax consequences of temporary differences between financial statement carrying amounts and tax bases of assets and liabilities. Deferred tax assets and liabilities are measured using enacted tax rates expected to apply to taxable income in the years in which those temporary differences are expected to be recovered or settled. The effect on deferred tax assets and liabilities of a change in tax rates is recognized in income in the period that includes the enactment date. We establish a valuation allowance to reduce deferred tax assets if it is “more likely than not” that a portion or all of the asset will not be realized in future tax returns.

An uncertain tax position represents our expected treatment of a tax position taken in a filed tax return, or planned to be taken in a future tax return, that has not been reflected in measuring income tax expense for financial reporting purposes. Until these positions are sustained by the taxing authorities, we do not recognize the tax benefits resulting from such positions and report the tax effects as a liability for uncertain tax positions in our consolidated balance sheet.

Accumulated Other Comprehensive Income

Accumulated other comprehensive income, net of tax, consists of the following:

 

     December 31,  
     2010     2009  

Accumulated net unrealized holding gain on
available-for-sale and long-term marketable securities

   $     231      $  1,128   

Accumulated transition pension obligation

     (48     (48

Actuarial gain (loss) on pension obligation

     (16     7   
                

Accumulated other comprehensive income

   $ 167      $ 1,087   
                

Leases

Our various office space and equipment leases are classified as operating leases. Certain of our leases for office space contain provisions under which monthly rent escalates over time and certain leases also contain provisions for reimbursement of a specified amount of leasehold improvements. When lease agreements contain escalating rent clauses, we recognize rent expense on a straight-line basis over the term of the lease. When lease agreements provide allowances for leasehold improvements, we capitalize the leasehold improvement assets and amortize them on a straight-line basis over the lesser of the lease term or the estimated useful life of the asset, and reduce rent expense on a straight-line basis over the term of the lease by the amount of the asset capitalized.

 

50


Table of Contents

Fair Value of Financial Instruments

See Note 4 for information regarding accounting policies related to the fair value of our financial instruments.

Risks and Uncertainties

Concentration of Suppliers

We do not own or operate a semiconductor fabrication facility and do not have the resources to manufacture our products internally. We rely on four third-party foundries to produce all of our wafers and three assembly and test vendors for completion of finished products. We do not have long-term agreements with any of these suppliers. In light of these dependencies, it is reasonably possible that failure to perform by one of these suppliers could have a material impact on our financial condition, results of operations and cash flows.

Risk of Technological Change

The markets in which we compete, or seek to compete, are subject to rapid technological change, frequent new product introductions, changing customer requirements for new products and features, and evolving industry standards. The introduction of new technologies and the emergence of new industry standards could render our products less desirable or obsolete, which could harm our business.

Concentrations of Credit Risk

Financial instruments that potentially subject us to concentrations of credit risk consist of cash equivalents, short- and long-term marketable securities and accounts receivable. We limit our exposure to credit risk associated with cash equivalent and marketable security balances by placing our funds in various high-quality securities and limiting concentrations of issuers and maturity dates. We limit our exposure to credit risk associated with accounts receivable by carefully evaluating creditworthiness before offering terms to customers.

NOTE 3.    BALANCE SHEET COMPONENTS

Marketable Securities—See Note 4

Accounts Receivable, Net

Accounts receivable consists of the following:

 

     December 31,  
     2010     2009  

Accounts receivable, gross

   $ 4,886      $ 6,047   

Allowance for doubtful accounts

     (399     (428
                

Accounts receivable, net

   $    4,487      $     5,619   
                

The following is a summary of the change in our allowance for doubtful accounts:

 

     Year Ended December 31,  
     2010     2009     2008  

Balance at beginning of year

   $       428      $       542      $ 542   

Additions charged (reductions credited)

     (29     (75       

Accounts written-off, net of recoveries

            (39       
                        

Balance at end of year

   $ 399      $ 428      $        542   
                        

 

51


Table of Contents

Inventories, Net

Inventories consist of the following:

 

     December 31,  
     2010     2009  

Finished goods

   $ 2,961      $ 2,888   

Work-in-process

     3,232        5,410   
                
     6,193        8,298   

Reserve for slow-moving and obsolete items

     (1,335     (2,140
                

Inventories, net

   $ 4,858      $ 6,158   
                

The Company recorded lower of cost or market write-downs of $771 and zero for the periods ended December 31, 2010 and 2009, respectively.

The following is a summary of the change in our reserve for slow-moving and obsolete items:

 

     Year Ended December 31,  
     2010     2009     2008  

Balance at beginning of period

   $ 2,140      $ 4,994      $ 5,950   

New provision

     860        1,225        1,496   

Sales of previously reserved inventory

     (88     (707     (1,008
                        

Net provision for obsolete inventory

           772              518              488   

Final scrap of previously reserved inventory

     (1,577     (3,372     (1,444
                        

Balance at end of period

   $ 1,335      $ 2,140      $ 4,994   
                        

Based upon our forecast and backlog we do not currently expect to be able to sell or otherwise use the reserved inventory we have on hand at December 31, 2010. However, it is possible that a customer will decide in the future to purchase a portion of the reserved inventory. During the years ended December 31, 2010, 2009, and 2008, sales of previously reserved inventory were primarily due to unanticipated demand for products nearing end-of-life.

Prepaid Expenses and Other Current Assets

Prepaid expenses and other current assets consist of current prepaid expenses, deposits, income taxes receivable, other receivables and deferred tax assets.

Property and Equipment, Net

Property and equipment consists of the following:

 

     December 31,  
     2010     2009  

Software

   $ 8,273      $ 6,712   

Equipment, furniture and fixtures

     7,420        7,289   

Tooling

     2,085        1,837   

Leasehold improvements

     2,628        2,634   
                
     20,406        18,472   

Accumulated depreciation and amortization

     (14,576     (13,351
                

Property and equipment, net

   $ 5,830      $ 5,121   
                

 

52


Table of Contents

Software amortization was $1,803, $1,973 and $2,634 for the years ended December 31, 2010, 2009 and 2008, respectively. Depreciation and amortization expense for equipment, furniture, fixtures, tooling and leasehold improvements was $1,563, $1,723 and $2,392 for the years ended December 31, 2010, 2009 and 2008, respectively.

Other Assets, Net

Other assets consist primarily of licensed technology as of December 31, 2010 and 2009. Amortization of licensed technology was $1,171, $911 and $1,674 for the years ended December 31, 2010, 2009 and 2008, respectively.

Acquired Intangible Assets, Net

Acquired intangible assets consist of the following developed technology:

 

     December 31,  
     2010     2009  

Gross carrying amount

   $ 19,170      $ 19,170   

Accumulated amortization

     (19,170     (18,120
                

Acquired intangible assets, net

   $      $ 1,050   
                

Amortization expense was $1,050, $2,336 and $2,984 for the years ended December 31, 2010, 2009 and 2008, respectively.

Accrued Liabilities and Current Portion of Long-Term Liabilities

Accrued liabilities and current portion of long-term liabilities consist of the following:

 

     December 31,  
     2010      2009  

Current portion of accrued liabilities for asset financings

   $    2,601       $ 2,068   

Accrued payroll and related liabilities

     2,365         2,279   

Accrued commissions and royalties

     1,139         853   

Reserve for warranty returns

     723         304   

Accrued interest payable

     358         257   

Accrued costs related to restructuring

     172         190   

Other

     1,625         2,562   
                 

Accrued liabilities and current portion of long-term liabilities

   $    8,983       $    8,513   
                 

The following is a summary of the changes in our reserves for warranty returns:

 

     Year Ended December 31,  
     2010     2009     2008  

Reserve for warranty returns:

      

Balance at beginning of year

   $        304      $       593      $       932   

Provision (benefit)

     1,132        269        (203

Charge-offs

     (713     (558     (136
                        

Balance at end of year

   $ 723      $ 304      $ 593   
                        

 

53


Table of Contents

Long-Term Liabilities, Net of Current Portion

Long-term liabilities, net of current portion consist of the following:

 

     December 31,  
     2010      2009  

Accrued liabilities for asset financings

   $ 1,314       $ 553   

Deferred rent

     302         494   

Payroll and related liabilities

     165         136   

Accrued costs related to restructuring

     119         218   

Other

     161         61   
                 

Long-term liabilities, net of current portion

   $    2,061       $    1,462   
                 

Short-Term Line of Credit

On December 21, 2010, we entered into a Loan and Security Agreement (the “Revolving Loan Agreement”) with Silicon Valley Bank (the “Bank”). The Revolving Loan Agreement provides for a secured working capital-based revolving line of credit (the “Revolving Line”) in an aggregate amount of up to the lesser of (i) $10,000, or (ii) 80% of eligible domestic accounts receivable and certain foreign accounts receivable. In addition, the Revolving Loan Agreement also provides for non-formula advances of up to $10,000 which may be made solely during the last five business days of any fiscal month or quarter and which must be repaid by the Company on or before the fifth business day after the applicable fiscal month or quarter end.

Amounts advanced under the Revolving Line bear interest at an annual rate equal to the lender’s prime rate plus 0.25%. Interest on the Revolving Line is due monthly, with the balance due on December 21, 2012, which is the scheduled maturity date for the Revolving Line.

The Revolving Loan Agreement contains customary affirmative and negative covenants, including with respect to the following: compliance with laws, provision of financial statements and periodic reports, payment of taxes, maintenance of inventory and insurance, maintenance of operating accounts at the Bank, the Bank’s access to collateral, formation or acquisition of subsidiaries, incurrence of indebtedness, dispositions of assets, granting liens, changes in business, ownership or business locations, engaging in mergers and acquisitions, making investments or distributions and affiliate transactions. The covenants also require that the Company maintain a minimum ratio of qualifying financial assets to the sum of qualifying financial obligations.

The Revolving Loan Agreement also contains customary events of default, including the following: defaults with respect to covenant compliance, the occurrence of a material adverse change, the occurrence of certain bankruptcy or insolvency events, cross-defaults, judgment defaults and material misrepresentations. The occurrence of an event of default could result in the acceleration of the Company’s obligations under the Revolving Loan Agreement and an increase to the applicable interest rate, and would permit the Bank to exercise remedies with respect to its security interest.

To secure the repayment of any amounts borrowed under the Revolving Loan Agreement, the Company granted to the Bank a security interest in substantially all of its assets, which assets do not include its intellectual property assets. The Company has agreed not to pledge or otherwise encumber its intellectual property assets without prior written permission from the Bank.

Short-term borrowings outstanding under the Revolving Line as of December 31, 2010 consisted of a non-formula advance of $3,000 which was repaid within required terms. The weighted-average interest rate on short-term borrowings outstanding as of December 31, 2010 was 3.5%.

 

54


Table of Contents

Debentures Currently Payable

In 2004, we issued $150,000 of 1.75% convertible subordinated debentures (the “debentures”) due 2024. In 2006, we repurchased and retired $10,000 principal amount of the debentures. In 2008, we repurchased and retired $79,366 principal amount of the debentures for $58,554 in cash. We recognized a net gain of $19,670 on the repurchase, which included a $21,567 discount, offset by legal and professional fees of $755 and a write-off of debt issuance costs of $1,142. In 2009, we repurchased and retired $44,855 principal amount of the debentures for $31,532 in cash. We recognized a net gain on the repurchase of $12,860, which included a $13,357 discount, offset by a write-off of debt issuance costs of $463 and other fees of $34. Gains on the repurchase of our debentures are included in other income in our statement of operations.

As of December 31, 2010, $15,779 of the debentures are outstanding. The remaining debentures are convertible, under certain circumstances, into our common stock at a conversion rate of 13.6876 shares of common stock per $1 principal amount of debentures for a total of 215,977 shares. This is equivalent to a conversion price of approximately $73.06 per share. The debentures are convertible if (a) our stock trades above 130% of the conversion price for 20 out of 30 consecutive trading days during any calendar quarter, (b) the debentures trade at an amount less than or equal to 98% of the if-converted value of the debentures for five consecutive trading days, (c) a call for redemption occurs, or (d) in the event of certain other specified corporate transactions. If our debentures are converted into common stock, they cannot be settled in cash or other assets.

We may redeem some or all of the debentures for cash on or after May 15, 2011 at a price equal to 100% of the principal amount of the debentures plus accrued and unpaid interest. The holders of the debentures have the right to require us to purchase all or a portion of their debentures on May 15, 2011, May 15, 2014 and May 15, 2019 at a price equal to 100% of the principal amount plus accrued and unpaid interest. As of December 31, 2010 we have classified the debentures as current liabilities as we expect the holders to require us to purchase all of the debentures on May 15, 2011.

The debentures are unsecured obligations and are subordinated in right of payment to all our existing and future senior debt, and are effectively subordinated to all existing and future debt of our subsidiaries. At December 31, 2010, we had $3,000 in senior debt outstanding and our subsidiaries had approximately $2,616 of liabilities to which the debentures were effectively subordinated. Although repayment of our debentures would consume a significant portion of our cash and marketable securities, we anticipate that our existing working capital, as well as funds available under our Revolving Line, will be adequate to fund our operating, investing and financing needs for the next twelve months.

We have evaluated each of the put, call and conversion features of the debentures and concluded that none of these features constitute embedded derivatives that must be bifurcated from the host contract and accounted for as derivatives.

The fees associated with the issuance of the convertible debentures included $4,500 withheld from the proceeds and $462 paid in cash. These debt issuance costs have been capitalized and are included in other assets, net in the consolidated balance sheets. The debt issuance costs are being amortized over seven years on a straight-line basis, which approximates the effective interest rate method. Debt issuance costs at December 31, 2010 and 2009 were $31 and $105, respectively.

 

55


Table of Contents

NOTE 4.     MARKETABLE SECURITIES AND FAIR VALUE MEASUREMENTS

At December 31, 2010 and 2009, all of our marketable securities are classified as available-for-sale and consist of the following:

 

     Cost      Unrealized
Gain (Loss)
    Fair
Value
 

Short-term marketable securities:

       

As of December 31, 2010:

       

US government agencies debt securities

   $ 5,513       $             3      $ 5,516   

Commercial paper

     5,747                5,747   

Corporate debt securities

     1,104         (1     1,103   
                         
   $    12,364       $ 2      $    12,366   
                         

As of December 31, 2009:

       

US government agencies debt securities

   $ 6,286       $ (3   $ 6,283   

Commercial paper

     2,996                2,996   

Corporate debt security

     542         1        543   
                         
   $ 9,824       $ (2   $ 9,822   
                         

 

     Cost      Unrealized
Gain
     Fair Value  

Long-term marketable securities:

        

As of December 31, 2010:

        

Equity securities

   $ 348       $ 255       $ 603   

As of December 31, 2009:

        

Equity securities

   $      2,110       $      1,130       $      3,240   

Unrealized holding gains and losses are recorded in accumulated other comprehensive income, a component of shareholders’ equity, in the consolidated balance sheets. During the years ended December 31, 2010 and 2009, we sold available-for-sale marketable securities for gross proceeds of $6,759 and $1,798, respectively, and gross realized gains of $1,397 and $3, respectively. Net unrealized holding gains of $944 on available-for sale marketable securities were reclassified out of accumulated other comprehensive income during the year ended December 31, 2010.

Fair Value Measurements

Fair value is defined as the price that would be received to sell an asset or paid to transfer a liability in an orderly transaction between market participants at the measurement date. Three levels of inputs may be used to measure fair value:

 

Level 1: Valuations based on quoted prices in active markets for identical assets and liabilities.

 

Level 2: Valuations based on inputs other than quoted prices included within Level 1 that are observable for the       asset or liability, either directly or indirectly.

 

Level 3: Valuations based on unobservable inputs in which there is little or no market data available, which       require the reporting entity to develop its own assumptions.

 

56


Table of Contents

The following tables present information about our assets measured at fair value on a recurring basis in the consolidated balance sheets at December 31, 2010 and 2009:

 

     Level 1      Level 2      Level 3      Total  

As of December 31, 2010:

           

Money market funds

   $ 13,933       $        —       $        —       $ 13,933   

Certificates of deposit

     200                         200   

U.S. government agencies debt securities

             5,516                 5,516   

Commercial paper

             6,947                 6,947   

Corporate debt securities

             1,605                 1,605   

Long-term marketable securities

     603                         603   
                                   

Total

   $ 14,736       $ 14,068       $       $ 28,804   
                                   

As of December 31, 2009:

           

Money market funds

   $ 16,873       $       $       $ 16,873   

Certificates of deposit

     200                         200   

U.S. government agencies debt securities

             6,283                 6,283   

Commercial paper

             2,996                 2,996   

Corporate debt security

             543                 543   

Long-term marketable securities

     3,240                         3,240   
                                   

Total

   $ 20,313       $ 9,822       $       $ 30,135   
                                   

The fair value of our current assets and liabilities, including accounts receivable, accounts payable, and our debentures currently payable approximates the carrying value due to the short-term nature of these balances. We have currently chosen not to elect the fair value option for any items that are not already required to be measured at fair value in accordance with GAAP.

NOTE 5.    RESTRUCTURINGS

In December 2008, we initiated a restructuring plan to reduce our operating expenses in response to decreases in current and forecasted revenue which resulted primarily from the global economic crisis. This plan reduced operations, research and development and administrative headcount in our San Jose, Taiwan and China offices and was completed during the second quarter of 2009.

In November 2006, we initiated a restructuring plan to reduce operating expenses. This plan included consolidation of our operations in order to reduce compensation and rent expense. As part of this plan, we also narrowed and redefined our product development strategy which resulted in the write-off of intellectual property assets, tooling, software development tools and charges for related non-cancelable contracts. Although this plan was completed in the fourth quarter of 2008, lease termination costs were recorded in 2010 and 2009 due to decreases in estimated future sublease income and related professional fees.

 

57


Table of Contents

Total restructuring expense included in our consolidated statements of operations is comprised of the following:

 

     Year Ended December 31,  
     2010      2009      2008  

Cost of revenue—restructuring:

        

Termination and retention benefits

   $       $ 43       $ 91   

Operating expenses—restructuring:

        

Consolidation of leased space

     94         160         508   

Termination and retention benefits

             75         1,081   
                          
     94         235         1,589   
                          

Total restructuring expense

   $         94       $       278       $    1,680   
                          

Termination and retention benefits included severance and retention payments for terminated employees and retention payments for certain continuing employees. Expenses related to the consolidation of leased space included future non-cancelable rent payments due for vacated space (net of estimated sublease income) and related professional fees.

Total cumulative restructuring expense recorded in our statement of operations related to the restructuring plans initiated in November 2006 and December 2008 is comprised of net write-off of assets and reversal of related liabilities of $15,296, termination and retention benefits of $8,133, consolidation of leased space of $2,192, a contract termination fee of $1,693, payments on non-cancelable contracts of $827, and other expenses of $88.

Accrued expenses related to the restructuring plans are included in current and non-current accrued liabilities in the consolidated balance sheets. The following is a roll-forward of the accrued liabilities related to the restructuring plans for the years ended December 31, 2010 and 2009:

 

     Balance as of
December 31,
2009
     Expensed      Payments     Balance as of
December 31,
2010
 

Lease termination costs

   $           408       $             94       $          (211   $           291   

 

     Balance as of
December 31,
2008
     Expensed      Payments     Balance as of
December 31,
2009
 

Termination and retention benefits

   $ 737       $ 118       $ (855   $   

Lease termination costs

     465         160         (217     408   
                                  

Total

   $        1,202       $           278       $       (1,072   $           408   
                                  

NOTE 6.    INCOME TAXES

Current and Deferred Income Tax Benefit

Domestic and foreign pre-tax income (loss) is as follows:

 

     Year Ended December 31,  
     2010     2009      2008  

Domestic

   $ (6,725   $ 4,376       $ 6,141   

Foreign

        1,703        1,202         1,829   
                         
   $ (5,022   $    5,578       $    7,970   
                         

 

58


Table of Contents

Income tax benefit attributable to continuing operations is comprised of the following:

 

     Year Ended December 31,  
     2010     2009     2008  

Current:

      

Federal

   $ (178   $ 55      $ 55   

State

     (150     20        142   

Foreign

     (5,314     (1,020        (496
                        

Total current

     (5,642     (945     (299

Deferred:

      

Federal

     92                 

State

     155                 

Foreign

            68        291   
                        

Total deferred

     247        68        291   
                        

Income tax benefit

   $ (5,395   $ (877   $ (8
                        

The significant differences between the U.S. federal statutory tax rate and our effective tax rate for financial statement purposes are as follows:

 

     Year Ended December 31,  
     2010     2009     2008  

Federal statutory rate:

             34             34             35

Decrease resulting from:

      

Change in valuation allowance

     (37     (30     (67

Tax contingencies, net of reversals

     117        (20       

Impact of foreign earnings

     (9     (4     26   

State income taxes, net of federal tax benefit

     1        4        2   

Stock compensation

     (2     1        3   

Other

     4        (1     1   
                        

Effective income tax rate

     108     (16 )%     
                        

 

59


Table of Contents

Deferred Tax Assets, Liabilities and Valuation Allowance

Deferred income taxes reflect the net tax effects of temporary differences between the carrying amount of assets and liabilities for financial reporting purposes and the amounts for income tax purposes. Significant components of our deferred tax assets and liabilities are as follows:

 

     December 31,  
     2010     2009  

Deferred tax assets:

    

Net operating loss carryforwards

   $ 65,111      $ 65,666   

Research and experimentation credit carryforwards

     11,444        12,471   

Foreign tax credit carryforwards

     5,260        8,717   

Depreciation

     2,373        2,304   

Deferred stock compensation

     2,360        2,705   

Capital loss carryforwards

     1,849          

Reserves and accrued expenses

     1,495        1,316   

Other-than-temporary impairment of marketable securities

     373        2,873   

Other

     1,854        2,208   
                

Total gross deferred tax assets

     92,119        98,260   

Deferred tax liabilities:

    

Amortization

            (382

Foreign earnings

     (553     (129

Other

     (240     (275
                

Total gross deferred tax liabilities

     (793     (786

Less valuation allowance

     (90,866     (96,767
                

Net deferred tax assets

   $ 460      $ 707   
                

The current portion of the net deferred tax asset balance is $151 and $155 as of December 31, 2010 and 2009, respectively, and is included in prepaid expenses and other current assets in the consolidated balance sheets. The non-current portion of the net deferred tax asset balance is $356 and $608 as of December 31, 2010 and 2009, respectively, and is included in other assets, net in the consolidated balance sheets. Long-term deferred tax liabilities were $47 and $56 as of December 31, 2010 and 2009, respectively, and are included in long-term liabilities, net of current portion in the consolidated balance sheets.

We continue to record a full valuation allowance against our U.S. and Canadian net deferred tax assets at December 31, 2010 and 2009 as it is not more likely than not that we will realize a benefit from these assets in a future period. We have not provided a valuation allowance against any of our other foreign net deferred tax assets as we have concluded it is more likely than not that we will realize a benefit from these assets in a future period because our subsidiaries in these jurisdictions are cost-plus taxpayers. The net valuation allowance decreased $5,901, $7,323 and $8,246 for the years ended December 31, 2010, 2009, and 2008, respectively.

As of December 31, 2010, we have federal, state and foreign net operating loss carryforwards of approximately $173,063, $73,525 and $424, respectively, which will expire between 2011 and 2027. As of December 31, 2010, we have available federal, state and foreign research and experimentation tax credit carryforwards of approximately $7,246, $2,431 and $1,884, respectively, which begin expiring in 2011. We have a general foreign tax credit of $2,786 which will begin expiring in 2018.

We had undistributed earnings of foreign subsidiaries of approximately $607 as of December 31, 2010, for which deferred taxes have not been provided because they are considered indefinitely invested outside of the United States. If repatriated, some of these earnings could generate foreign tax credits that may reduce the federal tax liability associated with any future foreign dividend. We have recorded a deferred tax liability for the undistributed earnings and profits of subsidiaries in which we are no longer considered indefinitely reinvested.

 

60


Table of Contents

During the year ended December 31, 2007, our Chinese subsidiary achieved designation as an integrated circuit design company, allowing us to benefit from a tax holiday resulting in reductions to our tax rates of 10%, 11% and 12% in 2009, 2010 and 2011, respectively. Our corporate tax rate will return to 25% in 2012 upon the expiration of the tax holiday.

Uncertain Tax Positions

We have recorded tax reserves to address potential exposures involving positions that could be challenged by taxing authorities. As of December 31, 2010 and 2009, the amount of our uncertain tax positions was a liability of $3,574 and $9,462, respectively.

The following is a summary of the change in our liability for uncertain tax positions and interest and penalties for the years ended December 31, 2010 and 2009:

 

     2010     2009  

Uncertain tax positions:

    

Balance at beginning of year

   $ 7,186      $ 8,257   

Accrual for positions taken in a prior year

     95        150   

Accrual for positions taken in current year

     1        159   

Reversals due to lapse of statute of limitations

     (4,657     (1,380
                

Balance at end of year

   $ 2,625      $ 7,186   
                

Interest and penalties:

    

Balance at beginning of year

   $ 2,276      $ 2,324   

Accrual for positions taken in prior year

     210        391   

Reversals due to lapse of statute of limitations

     (1,537     (439
                

Balance at end of year

   $ 949      $ 2,276   
                

We recognize interest and penalties related to uncertain tax positions in income tax expense in our consolidated statements of operations.

We file income tax returns in the U.S. and various foreign jurisdictions. A number of years may elapse before an uncertain tax position is resolved by settlement or statute of limitations. Settlement of any particular position could require the use of cash. If the uncertain tax positions we have accrued for are sustained by the taxing authorities in our favor, the reduction of the liability will reduce our effective tax rate. We reasonably expect reductions in the liability for unrecognized tax benefits of approximately $961 within the next twelve months due to the expiration of statutes of limitations in foreign jurisdictions.

We are no longer subject to U.S. federal examinations for years before 2007. We are subject to potential tax examinations in foreign locations for years 2004 through 2010. We do not anticipate that any potential tax adjustments will have a significant impact on our financial position or results of operations.

We were not subject to, nor had we received any notice of, income tax examinations as of December 31, 2010.

NOTE 7.    COMMITMENTS AND CONTINGENCIES

Royalties

We license technology from third parties and have agreed to pay certain suppliers a royalty based on the number of chips sold or manufactured, the net sales price of the chips containing the licensed technology or a fixed non-cancelable fee. Royalty expense is recognized based on our estimated average unit cost for royalty contracts with non-cancelable prepayments and the stated contractual per unit rate for all other agreements. Royalty expense was $1,489, $1,119 and $1,378 for the years ended December 31, 2010, 2009 and 2008, respectively, which is included in cost of revenue in the consolidated statements of operations.

 

61


Table of Contents

401(k) Plan

We sponsor a 401(k) plan for eligible employees. Participants may defer a percentage of their annual compensation on a pre-tax basis, not to exceed the dollar limit that is set by law. A discretionary matching contribution by the Company is allowed and is equal to a uniform percentage of the amount of salary reduction elected to be deferred, which percentage will be determined each year by the Company. The Company made no contributions to the 401(k) plan during the years ended December 31, 2010, 2009 or 2008.

Leases

At December 31, 2010, future minimum payments under operating leases are as follows:

 

Year Ending December 31:

  

2011

   $ 1,690   

2012

     1,043   

2013

     384   
        
   $ 3,117   
        

Minimum lease payments above are net of expected sublease rental income of $414, $266 and $135 for the years ending December 31, 2011, 2012 and 2013, respectively. Rent expense for the years ended December 31, 2010, 2009 and 2008 was $2,004, $2,014 and $2,421, respectively.

Contract Manufacturers

In the normal course of business, we commit to purchase products from our contract manufacturers to be delivered within the next 90 days. In certain situations, should we cancel an order, we could be required to pay cancellation fees. Such obligations could impact our immediate results of operations but would not materially affect our business.

Indemnifications

Certain of our agreements include limited indemnification provisions for claims from third-parties relating to our intellectual property. It is not possible for us to predict the maximum potential amount of future payments or indemnification costs under these or similar agreements due to the conditional nature of our obligations and the unique facts and circumstances involved in each particular agreement. We have not made any payments under these agreements in the past, and as of December 31, 2010, we have not incurred any material liabilities arising from these indemnification obligations. In the future, however, such obligations could immediately impact our results of operations but are not expected to materially affect our business.

Legal Proceedings

Effective October 1, 2010, the Company and Intersil Corporation (“Intersil”) entered into an agreement to resolve the previously disclosed dispute between the parties (Superior Court of the State of California for the County of Santa Clara, Case No. 1-10-CV-164894) (the “Action”). The agreement includes an amendment to the license agreement between Intersil and the Company reducing the total amount of remaining prepaid royalties to be paid by the Company from $1,250 to $900. Intersil and the Company each also agreed to dismiss with prejudice their respective claims against the other party in the Action and the Action was dismissed, with prejudice, on October 6, 2010.

In addition to the specific issue described above, we are subject to legal matters that arise from time to time in the ordinary course of our business. Although we currently believe that resolving such matters, individually or in the aggregate, will not have a material adverse effect on our financial position, our results of operations, or our cash flows, these matters are subject to inherent uncertainties and our view of these matters may change in the future.

 

62


Table of Contents

NOTE 8.    EARNINGS PER SHARE

Basic earnings per share amounts are computed based on the weighted average number of common shares outstanding. Diluted weighted average shares outstanding include the weighted average number of common shares outstanding plus potentially dilutive common shares outstanding during the period.

Potentially dilutive common shares from employee equity incentive plans are determined by applying the treasury stock method to the assumed exercise of outstanding stock options, the assumed vesting of outstanding restricted stock awards and units, and the assumed issuance of common stock under the stock purchase plan. Potentially dilutive common shares issuable upon conversion of our convertible subordinated debentures are computed using the if-converted-method.

The following schedule reconciles the computation of basic net income per share and diluted net income per share (in thousands, except per share data):

 

     Year Ended December 31,  
     2010      2009      2008  

Net income used in basic net income per share

   $         373       $      6,455       $      7,978   
                          

Basic weighted average shares outstanding

     13,442         13,318         14,399   

Dilutive effect of employee equity incentive plans

     942         369         11   
                          

Diluted weighted average shares outstanding

     14,384         13,687         14,410   
                          

Net income per common share

        

Basic

   $ 0.03       $ 0.48       $ 0.55   
                          

Diluted

   $ 0.03       $ 0.47       $ 0.55   
                          

The following weighted average shares were excluded from the calculation of diluted weighted average shares outstanding as their effect would have been anti-dilutive:

 

     Year Ended December 31,  
     2010      2009      2008  

Employee equity incentive plans

     1,650,320         1,500,767         1,793,187   

Conversion of debentures

     215,976         356,309         1,191,026   

NOTE 9.    SUPPLEMENTAL DISCLOSURE OF CASH FLOW INFORMATION

Supplemental disclosure of cash flow information is as follows:

 

     Year Ended December 31,  
     2010     2009      2008  

Cash paid (received) during the year for:

       

Interest

   $         401      $         620       $      1,882   

Income taxes, net of refunds received

     (48     196         218   

Non-cash investing and financing activities:

       

Acquisitions of property and equipment and other
assets under extended payment terms

   $ 4,400      $ 2,966       $ 1,815   

Unrealized gain on available-for-sale securities

     47        1,003         50   

Increase in leasehold improvements and deferred rent
related to tenant improvement allowances received

                    140   

 

63


Table of Contents

NOTE 10.    SHAREHOLDERS’ EQUITY

Preferred Stock

The Company is authorized to issue 50,000,000 shares of preferred stock with a par value of $0.001 per share. The Board of Directors is authorized to fix or alter the rights, preferences, privileges and restrictions granted to, or imposed on, each series of preferred stock. There are no shares of preferred stock issued as of December 31, 2010 and 2009.

Common Stock

The Company is authorized to issue 250,000,000 shares of common stock with a par value of $0.001 per share. Shareholders of common stock have unlimited voting rights and are entitled to receive the net assets of the Company upon dissolution, subject to the rights of the preferred shareholders, if any.

Reverse Stock Split

On June 4, 2008, we effected a one-for-three reverse split of our common stock. The exercise price and number of shares of common stock issuable under our stock incentive plans, as well as the conversion price and number of shares issuable upon conversion of our debentures, were proportionately adjusted to reflect the reverse stock split. Basic and diluted weighted average shares outstanding and earnings per share have been calculated to reflect the reverse stock split in all periods presented, as have all disclosures that include a reference to the number of shares of our common stock or a related calculation.

Employee Equity Incentive Plans

On May 23, 2006, our shareholders approved the adoption of the Pixelworks, Inc. 2006 Stock Incentive Plan (the “2006 Plan”). Our shareholders approved increases to the total authorized shares of 1,000,000, 1,150,000, and 1,000,000 on May 18, 2010, May 19, 2009, and May 20, 2008, respectively, increasing the total authorized shares available for issuance as equity awards to employees and non-employee directors to 4,483,333 shares. The 2006 Plan replaced our previously existing stock incentive plans including our 1997 Stock Incentive Plan, as amended, our 2001 Nonqualified Stock Option Plan, the Equator Technologies, Inc. 1996 Stock Incentive Plan, as amended, and Equator Technologies, Inc. stand-alone option plans (collectively, “Old Stock Incentive Plans”). Upon adoption of the 2006 Plan, no additional options could be issued under the Old Stock Incentive Plans, although awards previously granted under the Old Stock Incentive Plans remain outstanding according to their original terms. As of December 31, 2010, 1,551,929 shares were available for grant under the 2006 Plan.

Stock Options

Options granted must generally be exercised while the individual is an employee. In May 2009, the 2006 Plan was modified to reduce the contractual life of newly issued stock awards from ten to six years. Our new hire vesting schedule provides that each option becomes exercisable at a rate of 25% on the first anniversary date of the grant and 2.083% on the last day of every month thereafter for a total of 36 additional increments. Our merit vesting schedule provides that merit-type awards become exercisable monthly over a period of three years.

The following is a summary of stock option activity:

 

     Number of
shares
    Weighted
average
exercise
price
 

Options outstanding as of December 31, 2009:

     2,487,836      $        6.79   

Granted

     806,800        3.28   

Exercised

     (142,582     1.29   

Forfeited

     (97,406     2.12   

Expired

     (159,530     24.33   
          

Options outstanding as of December 31, 2010:

     2,895,118      $ 5.27   
          

 

64


Table of Contents

The following table summarizes information about options outstanding as of December 31, 2010:

 

     Options Outstanding      Options Exercisable  

    Range of

Exercise prices

   Number
outstanding as of
December 31,
2010
     Weighted
average
remaining
contractual
life
     Weighted
average
exercise

price
     Number
exercisable as of
December 31,
2010
     Weighted
average
exercise

price
 

  $0.21 - $0.80

     687,974         8.14       $ 0.62         370,139       $ 0.61   

    0.81 - 3.00

     498,915         6.90         2.09         348,672         2.09   

    3.01 - 4.00

           1,006,767         5.08         3.23         255,546         3.23   

    4.01 - 10.00

     379,815         5.47         6.13         327,516         6.31   

  10.01 - 26.00

     174,688         3.49         19.60         174,688         19.60   

  26.01 - 57.00

     146,959         3.05             32.61         146,959             32.61   
                          

  $0.21 - $57.00

     2,895,118         5.97       $ 5.27               1,623,520       $ 7.43   
                          

During the years ended December 31, 2010, 2009 and 2008 the total intrinsic value of options exercised was $340, $10 and $2, respectively, for which no income tax benefit has been recorded because a full valuation allowance has been provided for our U.S. deferred tax assets. As of December 31, 2010, options outstanding had a total intrinsic value of $2,919.

Options outstanding that have vested and are expected to vest as of December 31, 2010 are as follows:

 

     Number of
shares
     Weighted
average
exercise
price
     Weighted
average
remaining
contractual
term
     Aggregate
intrinsic
value
 

Vested

     1,623,520       $ 7.43         5.89       $ 1,610,775   

Expected to vest

     1,062,037         2.47         6.12         1,135,039   
                       

Total

     2,685,557       $ 5.47         5.98       $ 2,745,814   
                       

The fair value of options vested in each of the years ended December 31, 2010, 2009 and 2008 approximates total stock-based compensation expense recorded in our statement of operations during each of the respective years.

Restricted Stock Awards

The 2006 Plan provides for the issuance of restricted stock, including restricted stock units, to employees and non-employee directors. During the years ended December 31, 2010 and 2009, we granted 48,000 and 100,000 shares, respectively, of restricted stock with a fair value of $4.26 and $0.60 per share, respectively. No restricted stock was granted during the year ended December 31, 2008. As of December 31, 2010 there were 81,666 unvested shares of restricted stock outstanding.

Employee Stock Purchase Plans

On January 31, 2010, the 2000 Employee Stock Purchase Plan (“2000 ESPP”) expired. During the years ended December 31, 2010, 2009 and 2008, we issued 12,382, 18,326, and 23,553 shares, respectively, for proceeds of $18, $11 and $45, respectively, under the 2000 ESPP.

On May 18, 2010, our shareholders approved the adoption of the 2010 Pixelworks, Inc. Employee Stock Purchase Plan (the “ESPP”) for U.S. employees and for certain foreign subsidiary employees. The ESPP provides for separate offering periods commencing on February 1 and August 1, with the first offering period

 

65


Table of Contents

beginning August 1, 2010. Each offering period continues for a period of 18 months with purchases every six months. Each eligible employee may purchase up to 3,000 shares of stock on each purchase date, with a maximum annual purchase amount of $25. The purchase price is equal to 85% of the lesser of the fair market value of the shares on the offering date or on the purchase date. A total of 1,300,000 shares of common stock have been reserved for issuance under the ESPP. As of December 31, 2010, there were no shares issued under the ESPP.

Stock-Based Compensation Expense

The fair value of stock-based compensation was determined using the Black-Scholes option pricing model and the following weighted average assumptions:

 

     Year Ended December 31,  
     2010     2009     2008  

Stock Option Plans:

      

Risk free interest rate

             2.11             2.24            2.71

Expected dividend yield

     0     0     0

Expected term (in years)

     4.6        5.0        4.8   

Volatility

     92     84     68

Employee Stock Purchase Plan:

      

Risk free interest rate

     0.33     0.33     2.05

Expected dividend yield

     0     0     0

Expected term (in years)

     1.1        0.5        0.5   

Volatility

     94     137     85

The weighted average fair value of options granted during the years ended December 31, 2010, 2009 and 2008 was $2.27, $0.95 and $1.13, respectively. The risk free interest rate is estimated using an average of treasury bill interest rates. The expected dividend yield is zero as we have not paid any dividends to date and do not expect to pay dividends in the future. Expected volatility is estimated based on the historical volatility of our common stock over the expected term as this represents our best estimate of future volatility. For the year ended December 31, 2008 and from January 2009 to April 2009, the expected term of options was estimated using historical exercise behavior. Subsequent to the May 2009 amendment of our 2006 Stock Incentive Plan, which shortened the contractual life of newly issued stock options from ten to six years, we have elected to use the “simplified method” to estimate expected term. Under the simplified method, an option’s expected term is calculated as the average of its vesting period and original contractual life. The expected term of ESPP purchase rights is based on the estimated weighted average time to purchase.

As of December 31, 2010, unrecognized stock-based compensation cost is $2,190, which is expected to be recognized as compensation expense over a weighted average period of 2.1 years.

NOTE 11.    SEGMENT INFORMATION

We have identified a single operating segment: the design and development of integrated circuits for use in electronic display devices. Substantially all of our assets are located in the U.S.

 

66


Table of Contents

Geographic Information

Revenue by geographic region, attributed to countries based on the domicile of the bill-to customer, was as follows:

 

     Year Ended December 31,  
     2010     2009     2008  

Japan

   $ 44,982      $ 34,030      $ 50,408   

Taiwan

     11,577        13,399        10,582   

Europe

     2,930        3,012        6,639   

U.S.

     2,774        2,047        3,872   

Korea

     2,674        3,182        5,583   

China

     1,351        2,809        1,734   

Other

     3,241        2,614        6,346   
                        
   $   69,529      $   61,093      $   85,164   
                        

 

Significant Customers

 

The percentage of revenue attributable to our distributors, top five end customers, and individual distributors or end customers that represented more than 10% of revenue in at least one of the periods presented, is as follows:

 

  

   

     Year Ended December 31,  
     2010     2009     2008  

Distributors:

      

All distributors

                61                51                53

Distributor A

     44     35     32

End Customers: (1)

      

Top five end customers

     58     56     55

End customer A

     20     21     24

End customer B

     13     10     9

End customer C

     10     11     9

 

(1) End customers include customers who purchase directly from us, as well as customers who purchase our products indirectly through distributors.

 

Each of the following accounts represented 10% or more of total accounts receivable:

 

     

  

      December 31,  
      2010     2009  

Account A

  

               45                22

Account B

  

    25     34

Account C

  

    7     11

 

67


Table of Contents

NOTE 12.    QUARTERLY FINANCIAL DATA (UNAUDITED)

 

     Quarterly Period Ended  
     March 31     June 30     September 30     December 31  

2010

        

Revenue, net

   $      18,692      $      18,665      $ 18,027      $      14,145   

Gross profit

     8,656        8,647        8,294        6,566   

Loss from operations

     (571     (863     (1,003     (3,471

Loss before income taxes

     (699     (642     (814     (2,867

Net income (loss)

     4,602        (1,015     7        (3,221

Net income (loss) per share:

        

Basic

     0.34        (0.08     0.00        (0.24

Diluted

     0.32        (0.08     0.00        (0.24

2009

        

Revenue, net

   $ 10,780      $ 14,213      $ 16,732      $ 19,368   

Gross profit

     4,156        6,773        7,341        9,025   

Loss from operations

     (4,530     (1,163     (644     (423

Income (loss) before income taxes

     4,280        2,577        (734     (545

Net income (loss)

     5,897        2,219        (890     (771

Net income (loss) per share:

        

Basic

     0.44        0.17        (0.07     (0.06

Diluted

     0.44        0.16        (0.07     (0.06

Item 9.    Changes in and Disagreements with Accountants on Accounting and Financial Disclosure.

None.

Item 9A.    Controls and Procedures.

Disclosure Controls and Procedures

As of the end of the period covered by this report, we conducted an evaluation under the supervision and with the participation of our Chief Executive Officer and Chief Financial Officer of our disclosure controls and procedures (as defined in Rule 13a-15(e) and Rule 15d-15(f) of the Securities Exchange Act of 1934, as amended (the “Exchange Act”)). Based on this evaluation, the Chief Executive Officer and Chief Financial Officer concluded that, as of December 31, 2010, our disclosure controls and procedures were effective to ensure that information required to be disclosed in our periodic reports filed or submitted under the Securities Exchange Act is (i) recorded, processed, summarized and reported within the time periods specified in the Securities and Exchange Commission’s rules and forms, and (ii) accumulated and communicated to our management, including our Chief Executive Officer and Chief Financial Officer, as appropriate to allow timely decisions regarding disclosure.

Our management, including our Chief Executive Officer and Chief Financial Officer, does not expect that our disclosure controls and procedures will prevent or detect all errors and all fraud. Disclosure controls and procedures, no matter how well designed, operated and managed, can provide only reasonable assurance that the objectives of the disclosure controls and procedures are met. Because of the inherent limitations of disclosure controls and procedures, no evaluation of such disclosure controls and procedures can provide absolute assurance that all control issues and instances of fraud, if any, have been detected.

Management’s Report on Internal Control Over Financial Reporting

Our management is responsible for establishing and maintaining a system of internal control over financial reporting (as defined in Rules 13a-15(f) and 15d-15(f) under the Exchange Act) to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with U.S. generally accepted accounting principles. All internal control systems, no matter how well designed, have inherent limitations.

 

68


Table of Contents

We conducted an assessment of the effectiveness of our system of internal control over financial reporting as of December 31, 2010, the last day of our fiscal year. This assessment was based on criteria established in the framework Internal Control—Integrated Framework, issued by the Committee of Sponsoring Organizations of the Treadway Commission and included an evaluation of elements such as the design and operating effectiveness of key financial reporting controls, process documentation, accounting policies, and our overall control environment. Based on our assessment, management has concluded that our internal control over financial reporting was effective as of the end of the fiscal year to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external reporting purposes in accordance with U.S. generally accepted accounting principles. We reviewed the results of management’s assessment with the Audit Committee of our Board of Directors.

The effectiveness of our internal control over financial reporting as of December 31, 2010 has been audited by KPMG LLP, our independent registered public accounting firm, as stated in their report, which is presented below.

Changes in Internal Control Over Financial Reporting

There were no changes to our internal control over financial reporting (as defined in Rules 13a-15(f) and 15d-15(f) under the Exchange Act) that occurred during the period covered by this report that have materially affected, or are reasonably likely to materially affect, our internal control over financial reporting.

 

69


Table of Contents

Report of Independent Registered Public Accounting Firm

The Board of Directors and Shareholders

Pixelworks, Inc.:

We have audited Pixelworks, Inc.’s internal control over financial reporting as of December 31, 2010, based on criteria established in Internal Control—Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission (COSO). Pixelworks, Inc.’s management is responsible for maintaining effective internal control over financial reporting and for its assessment of the effectiveness of internal control over financial reporting, included in the accompanying Management Report on Internal Control Over Financial Reporting. Our responsibility is to express an opinion on the Company’s internal control over financial reporting based on our audit.

We conducted our audit in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether effective internal control over financial reporting was maintained in all material respects. Our audit included obtaining an understanding of internal control over financial reporting, assessing the risk that a material weakness exists, and testing and evaluating the design and operating effectiveness of internal control based on the assessed risk. Our audit also included performing such other procedures as we considered necessary in the circumstances. We believe that our audit provides a reasonable basis for our opinion.

A company’s internal control over financial reporting is a process designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles. A company’s internal control over financial reporting includes those policies and procedures that (1) pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of the assets of the company; (2) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that receipts and expenditures of the company are being made only in accordance with authorizations of management and directors of the company; and (3) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use, or disposition of the company’s assets that could have a material effect on the financial statements.

Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.

In our opinion, Pixelworks, Inc. maintained, in all material respects, effective internal control over financial reporting as of December 31, 2010, based on criteria established in Internal Control—Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission.

We also have audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States), the consolidated balance sheets of Pixelworks, Inc. and subsidiaries as of December 31, 2010 and 2009, and the related consolidated statements of operations, shareholders’ equity (deficit) and comprehensive income (loss), and cash flows for each of the years in the three-year period ended December 31, 2010, and our report dated March 9, 2011 expressed an unqualified opinion on those consolidated financial statements.

/s/ KPMG LLP

Portland, Oregon

March 9, 2011

 

70


Table of Contents

Item 9B. Other Information.

Not applicable.

PART III

 

Item 10. Directors, Executive Officers and Corporate Governance.

Information concerning the directors, executive officers and corporate governance of the Company is set forth in the Company’s Proxy Statement for its 2011 Annual Meeting of Shareholders (the “2011 Proxy Statement”) to be filed pursuant to Regulation 14A and is incorporated herein by reference.

 

Item 11. Executive Compensation.

Information concerning executive compensation is included in our 2011 Proxy Statement and is incorporated herein by reference.

 

Item 12. Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters.

Information concerning security ownership of certain beneficial owners and management and related stockholder matters is included in our 2011 Proxy Statement and is incorporated herein by reference.

 

Item 13. Certain Relationships and Related Transactions, and Director Independence.

Information concerning certain relationships and related transactions and director independence is included in our 2011 Proxy Statement and is incorporated herein by reference.

 

Item 14. Principal Accounting Fees and Services.

Information concerning principal accounting fees and services is set forth in our 2011 Proxy Statement and is incorporated herein by reference.

PART IV

 

Item 15. Exhibits, Financial Statement Schedules.

 

(a) 1. Financial Statements.

The following financial statements are included in Item 8. Financial Statements and Supplementary Data:

 

Report of Independent Registered Public Accounting Firm

  

Consolidated Balance Sheets as of December 31, 2010 and 2009

  

Consolidated Statements of Operations for the years ended December 31, 2010, 2009 and 2008

  

Consolidated Statements of Cash Flows for the years ended December 31, 2010, 2009 and 2008

  

Consolidated Statements of Shareholders’ Equity (Deficit) and Comprehensive Income (Loss) for the years ended December 31, 2010, 2009 and 2008

  

Notes to Consolidated Financial Statements

  

 

(a) 2.    Financial Statement Schedules.

All schedules have been omitted because the required information is included in the consolidated financial statements or the notes thereto, or is not applicable or required.

 

71


Table of Contents
(a) 3. Exhibits.

The exhibits are either filed with this report or incorporated by reference into this report.

 

Exhibit
Number

  

Description

  3.1    Sixth Amended and Restated Articles of Incorporation of Pixelworks, Inc., As Amended (incorporated by reference to Exhibit 3.1 to the Company’s Quarterly Report on Form 10-Q filed on August 9, 2004).
  3.2    Third Amendment to Sixth Amended and Restated Articles of Incorporation of Pixelworks, Inc. (incorporated by reference to Exhibit 3.1 to the Company’s Quarterly Report on Form 10-Q filed on August 11, 2008).
  3.3    Second Amended and Restated Bylaws of Pixelworks, Inc. (incorporated by reference to Exhibit 3.3 to the Company’s Annual Report on Form 10-K filed March 10, 2010).
  4.1    Reference is made to Exhibit 3.1 above (incorporated by reference to Exhibit 4.1 to the Company’s Registration Statement on Form S-1 declared effective May 19, 2000).
  4.2    Third Amended Registration Rights Agreement dated February 22, 2000 (incorporated by reference to Exhibit 4.2 to the Company’s Registration Statement on Form S-1 declared effective May 19, 2000).
  4.3    Indenture dated May 18, 2004 between Pixelworks, Inc. and Wells Fargo Bank, National Association (incorporated by reference to Exhibit 4.1 to the Company’s Quarterly Report on Form 10-Q filed on August 9, 2004).
  4.4    Form of 1.75% Convertible Subordinated Debentures due 2024 dated May 18, 2004 (incorporated by reference to Exhibit 4.2 to the Company’s Quarterly Report on Form 10-Q filed on August 9, 2004).
  4.5    Registration Rights Agreement, dated May 18, 2004 among Pixelworks, Inc., Citigroup Global Markets Inc. and D.A. Davidson & Co. (incorporated by reference to Exhibit 4.3 to the Company’s Quarterly Report on Form 10-Q filed on August 9, 2004).
  4.6    Purchase Agreement, dated May 12, 2004 among Pixelworks, Inc. and Citigroup Global Markets Inc. (incorporated by reference to Exhibit 4.4 to the Company’s Quarterly Report on Form 10-Q filed on August 9, 2004).
10.1    Form of Indemnity Agreement between Pixelworks, Inc. and certain of its Officers and Directors (incorporated by reference to Exhibit 10.1 to the Company’s Registration Statement on Form S-1 declared effective May 19, 2000). +
10.2    Form of Indemnity Agreement between Pixelworks, Inc. and each of the members of the Board and Steven Moore, the Company’s Chief Financial Officer (incorporated by reference to Exhibit 10.1 to the Company’s Current Report on Form 8-K filed on August 2, 2010). +
10.3    Pixelworks, Inc. 1997 Stock Incentive Plan, as amended (incorporated by reference to Exhibit 99.1 to the Company’s Registration Statement on Form S-8 filed on June 21, 2005). +
10.4    Pixelworks, Inc. 2010 Employee Stock Purchase Plan (incorporated by reference to Exhibit 4.2 to the Company’s Registration Statement on Form S-8 filed on July 16, 2010). +
10.5    Pixelworks, Inc. 2001 Nonqualified Stock Option Plan (incorporated by reference to Exhibit 99.1 to the Company’s Registration Statement on Form S-8 filed on May 31, 2001). +
10.6    Equator Technologies, Inc. 1996 Stock Option Plan, as amended (incorporated by reference to Exhibit 99.1 to the Company’s Registration Statement on Form S-8 filed on June 17, 2005). +
10.7    Pixelworks, Inc. Amended and Restated 2006 Stock Incentive Plan (incorporated by reference to Exhibit 4.1 to the Company’s Registration Statement on Form S-8 filed on July 16, 2010). +

 

72


Table of Contents
10.8    Pixelworks, Inc. Amended and Restated 2006 Stock Incentive Plan, Terms and Conditions of Restricted Stock Awards (incorporated by reference to Exhibit 10.3 to the Company’s Quarterly Report on Form 10-Q filed on May 7, 2009). +
10.9    Pixelworks, Inc. Amended and Restated 2006 Stock Incentive Plan, Terms and Conditions of Option Grants (incorporated by reference to Exhibit 10.4 to the Company’s Quarterly Report on Form 10-Q filed on May 7, 2009). +
10.10    Pixelworks, Inc. Amended and Restated 2006 Stock Incentive Plan, Terms and Conditions of Director Stock Unit Awards (incorporated by reference to Exhibit 10.2 to the Company’s Quarterly Report on Form 10-Q filed on November 4, 2010). +
10.11    Pixelworks, Inc. Amended and Restated 2006 Stock Incentive Plan, Terms and Conditions of Restricted Stock Unit Award. +
10.12    Summary of Pixelworks Non-Employee Director Compensation (incorporated by reference to Exhibit 10.1 to the Company’s Quarterly Report on Form 10-Q filed on November 4, 2010). +
10.13    2009 Executive Employment Agreement dated May 11, 2009 and effective April 1, 2009, by and between Bruce Walicek and Pixelworks, Inc (incorporated by reference to Exhibit 10.13 to the Company’s Annual Report on Form 10-K filed March 10, 2010). +
10.14    Form of Pixelworks, Inc. Senior Management Bonus Plan (incorporated by reference to Exhibit 10.1 to the Company’s Current Report on Form 8-K filed December 31, 2009). +
10.15    Offer letter dated June 22, 2007 between Pixelworks, Inc. and Steven L. Moore (incorporated by reference to Exhibit 10.2 to the Company’s Quarterly Report on Form 10-Q filed August 9, 2007). +
10.16    Change of Control Severance Agreement dated November 20, 2008, by and between Pixelworks, Inc. and Steven L. Moore (incorporated by reference to Exhibit 10.1 to the Company’s Current Report on Form 8-K filed November 20, 2008). +
10.17    Change of Control Severance Agreement dated May 11, 2009 and effective April 1, 2009, by and between Pixelworks, Inc. and Steven L. Moore (incorporated by reference to Exhibit 10.18 to the Company’s Annual Report on Form 10-K filed March 10, 2010). +
10.18    Change of Control Severance Agreement dated November 20, 2008, by and between Pixelworks, Inc. and Hongmin (Bob) Zhang (incorporated by reference to Exhibit 10.2 to the Company’s Current Report on Form 8-K filed November 20, 2008). +
10.19    Change of Control Severance Agreement dated November 22, 2008, by and between Pixelworks, Inc. and Tzoyao (T) Chan (incorporated by reference to Exhibit 10.21 to the Company’s Annual Report on Form 10-K filed March 10, 2010). +
10.20    Intellectual Property Sublicense Agreement dated March 30, 1999 between VAutomation Incorporated and Pixelworks, Inc. (incorporated by reference to Exhibit 10.9 to the Company’s Registration Statement on Form S-1 declared effective May 19, 2000).
10.21    License Agreement dated February 22, 2000 between Pixelworks, Inc. and InFocus Systems, Inc. (incorporated by reference to Exhibit 10.10 to the Company’s Registration Statement on Form S-1 declared effective May 19, 2000).
10.22    Office Lease Agreement dated December 2005, by and between CA-The Concourse Limited Partnership and Pixelworks, Inc. (incorporated by reference to Exhibit 10.42 to the Company’s Annual Report on Form 10-K filed March 13, 2006).
10.23    Office Lease dated April 12, 2001, by and between Equator Technologies, Inc. and Pike Street Delaware, Inc. (incorporated by reference to Exhibit 10.18 to the Company’s Quarterly Report on Form 10-Q filed August 9, 2005).

 

73


Table of Contents
10.24    Amendment No. 1 to Office Lease dated July 7, 2005, by and between Equator Technologies, Inc. and 520 Pike Street, Inc. (incorporated by reference to Exhibit 10.20 to the Company’s Quarterly Report on Form 10-Q filed November 7, 2005).
10.25    Office Lease Agreement dated September 10, 2008 and commencing December 1, 2008 by and between Pixelworks, Inc. and Durham Plaza, LLC (incorporated by reference to Exhibit 10.3 to the Company’s Quarterly Report on Form 10-Q filed on November 7, 2008).
10.26    Loan and Security Agreement dated December 21, 2010 by and between Silicon Valley Bank and Pixelworks, Inc.
21    Subsidiaries of Pixelworks, Inc.
23    Consent of KPMG LLP.
31.1    Certification of Chief Executive Officer.
31.2    Certification of Chief Financial Officer.
32.1*    Certification of Chief Executive Officer.
32.2*    Certification of Chief Financial Officer.

 

+ Indicates a management contract or compensation arrangement.

 

* Exhibits 32.1 and 32.2 are being furnished and shall not be deemed to be “filed” for purposes of Section 18 of the Securities Exchange Act of 1934, as amended (the “Exchange Act”), or otherwise subject to the liability of that section, nor shall such exhibits be deemed to be incorporated by reference in any registration statement or other document filed under the Securities Act of 1933, as amended, or the Exchange Act, except as otherwise stated in such filing.

 

74


Table of Contents

SIGNATURES

Pursuant to the requirements of Sections 13 or 15(d) of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned, thereunto duly authorized.

 

    PIXELWORKS, INC.
Dated: March 9, 2011   By:  

/s/ Bruce A. Walicek

    Bruce A. Walicek
    President and Chief Executive Officer

Pursuant to the requirements of the Securities Exchange Act of 1934, this report has been signed by the following persons on behalf of the Registrant and in the capacities and on the dates indicated.

 

Signature

  

Title

 

Date

/s/ Bruce A. Walicek

Bruce A. Walicek

  

President and

Chief Executive Officer

  March 9, 2011

/s/ Steven L. Moore

Steven L. Moore

   Vice President, Chief Financial Officer, Secretary and Treasurer   March 9, 2011

/s/ Richard L. Sanquini

Richard L. Sanquini

   Chairman of the Board   March 9, 2011

/s/ Mark A. Christensen

Mark A. Christensen

   Director   March 9, 2011

/s/ James R. Fiebiger

James R. Fiebiger

   Director   March 9, 2011

/s/ C. Scott Gibson

C. Scott Gibson

   Director   March 9, 2011

/s/ Daniel J. Heneghan

Daniel J. Heneghan

   Director   March 9, 2011

/s/ Stephen L. Domenik

Stephen L. Domenik

   Director   March 9, 2011

/s/ Bruce A. Walicek

Bruce A. Walicek

   Director   March 9, 2011

 

75