Form 10-Q
Table of Contents

 

 

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

WASHINGTON, D.C. 20549

 

 

FORM 10 – Q

 

 

 

x QUARTERLY REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the quarterly period ended March 31, 2010

OR

 

¨ TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the transition period from              to             

COMMISSION FILE NUMBER: 0-29440

 

 

SCM MICROSYSTEMS, INC.

(EXACT NAME OF REGISTRANT AS SPECIFIED IN ITS CHARTER)

 

 

 

DELAWARE   77-0444317

(STATE OR OTHER JURISDICTION OF

INCORPORATION OR ORGANIZATION)

 

(I.R.S. EMPLOYER

IDENTIFICATION NUMBER)

1900 Carnegie Avenue, Building B

Santa Ana, California 92705

(ADDRESS OF PRINCIPAL EXECUTIVE OFFICES INCLUDING ZIP CODE)

(949) 250-8888

(REGISTRANT’S TELEPHONE NUMBER, INCLUDING AREA CODE)

 

(FORMER NAME, FORMER ADDRESS AND FORMER FISCAL YEAR, IF CHANGED SINCE LAST REPORT)

 

 

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.    Yes  x    No  ¨

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files).    Yes  ¨    No  ¨

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer or a smaller reporting company. See the definitions of “large accelerated filer,” “accelerated filer” and “smaller reporting company” in Rule 12b-2 of the Exchange Act. (Check one):

 

Large accelerated filer   ¨    Accelerated filer   ¨
Non-accelerated filer   ¨    Smaller Reporting Company   x

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act).    Yes  ¨    No  x

At May 13, 2010, 43,653,182 shares of common stock were outstanding, including 723,075 shares held in treasury.

 

 

 


Table of Contents

TABLE OF CONTENTS

 

            Page

PART I. FINANCIAL INFORMATION

  

Item 1.

     Financial Statements    3

Item 2.

     Management’s Discussion and Analysis of Financial Condition and Results of Operations    21

Item 3.

     Quantitative and Qualitative Disclosures About Market Risk    33

Item 4.

     Controls and Procedures    33

PART II. OTHER INFORMATION

  

Item 1.

     Legal Proceedings    33

Item 1A

     Risk Factors    34

Item 2.

     Unregistered Sales of Equity Securities and Use of Proceeds    52

Item 3.

     Defaults Upon Senior Securities    52

Item 4.

     Reserved    52

Item 5.

     Other Information    52

Item 6.

     Exhibits    52

SIGNATURES

   53

EXHIBIT INDEX

  

 

2


Table of Contents

PART I: FINANCIAL INFORMATION

 

Item 1. Financial Statements

SCM MICROSYSTEMS, INC. AND SUBSIDIARIES

CONDENSED CONSOLIDATED STATEMENTS OF OPERATIONS

(In thousands, except per share data)

(unaudited)

 

     Three Months Ended
March 31,
 
     2010     2009  

Net revenue

   $ 15,346      $ 5,155   

Cost of revenue

     9,141        3,042   
                

Gross profit

     6,205        2,113   
                

Operating expenses:

    

Research and development

     2,171        769   

Selling and marketing

     6,097        2,244   

General and administrative

     3,162        2,487   

Restructuring and other charges

     264        —     

Gain on sale of assets

     —          (249
                

Total operating expenses

     11,694        5,251   
                

Loss from operations

     (5,489     (3,138

Loss on equity investments

     —          (289

Interest (expense) income, net

     (231     27   

Foreign currency (losses) gains, net

     (314     252   
                

Loss from continuing operations before income taxes and noncontrolling interest

     (6,034     (3,148

(Provision) benefit for income taxes

     (162     1   
                

Loss from continuing operations

     (6,196     (3,147

(Loss) gain from discontinued operations, net of income taxes

     (120     67   

Gain on sale of discontinued operations, net of income taxes

     43        37   
                

Consolidated net loss

     (6,273     (3,043

Less: Net loss attributable to noncontrolling interest

     221        —     

Net loss attributable to SCM Microsystems, Inc.

   $ (6,052   $ (3,043
                

Basic and diluted net loss per share attributable to SCM Microsystems, Inc.:

    

Loss from continuing operations

   $ (0. 15   $ (0.20
                

(Loss) income from discontinued operations

   $ 0.00      $ 0.01   
                

Net loss per share

   $ (0.15   $ (0.19
                

Weighted-average shares used to compute basic and diluted (loss) income per share

     39,755        15,744   
                

See notes to condensed consolidated financial statements.

 

3


Table of Contents

SCM MICROSYSTEMS, INC. AND SUBSIDIARIES

CONDENSED CONSOLIDATED BALANCE SHEETS

(In thousands, except par value)

(unaudited)

 

     March 31,
2010
    December 31,
2009
 
ASSETS     

Current assets:

    

Cash and cash equivalents

   $ 6,753      $ 4,836   

Accounts receivable, net of allowances

     9,005        6,739   

Inventories, net

     6,682        5,379   

Income taxes receivable

     271        274   

Other current assets

     2,948        1,647   
                

Total current assets

     25,659        18,875   

Property and equipment, net

     4,525        683   

Goodwill

     41,618        21,895   

Intangible assets, net

     34,344        22,082   

Other assets

     762        1,036   
                

Total assets

   $ 106,908      $ 64,571   
                
LIABILITIES AND STOCKHOLDERS’ EQUITY     

Current liabilities:

    

Accounts payable

   $ 8,807      $ 5,530   

Bank line of credit

     220        —     

Liability to related party

     1,359        1,027   

Accrued compensation and related benefits

     3,526        2,884   

Mortgage loan payable to bank

     57        —     

Other accrued expenses and liabilities

     8,923        5,132   

Income taxes payable

     283        188   
                

Total current liabilities

     23,175        14,761   
                

Long-term liability to related party

     7,841        7,899   

Mortgage loan payable to bank, long-term

     896        —     

Deferred tax liability

     4,480        3,515   

Long-term income taxes payable

     760        456   
                

Total liabilities

     37,152        26,631   

Commitments and contingencies (see Notes 11 and 13)

     —          —     

Equity:

    

SCM Microsystems, Inc. Stockholders’ equity:

    

Common stock, $0.001 par value: 60,000 shares authorized; 41,053 and 25,753 shares issued outstanding as of March 31, 2010 and December 31, 2009, respectively

     41        26   

Additional paid-in capital

     291,224        253,910   

Treasury stock, 723 and 618 shares as of March 31, 2010 and December 31, 2009, respectively

     (3,014     (2,777

Accumulated deficit

     (222,430     (216,378

Other accumulated comprehensive income

     1,299        3,159   
                

Total SCM Microsystems, Inc. stockholders’ equity

     67,120        37,940   

Noncontrolling interest

     2,636        —     
                

Total equity

     69,756        37,940   
                

Total liabilities and equity

   $ 106,908      $ 64,571   
                

See notes to condensed consolidated financial statements.

 

4


Table of Contents

SCM MICROSYSTEMS, INC. AND SUBSIDIARIES

CONDENSED CONSOLIDATED STATEMENTS OF EQUITY AND COMPREHENSIVE LOSS

Year Ended December 31, 2009 and Three Months Ended March 31, 2010

 

    SCM Microsystems, Inc. Shareholders                    
    Common Stock   Additional                 Other
Accumulated
                   
(In thousands)   Shares   Amount   Paid-in
Capital
    Treasury
Stock
    Accumulated
Deficit
    Comprehensive
Income (loss)
    Noncontrolling
Interest
    Total
Equity
    Comprehensive
Loss
 

Balances, December 31, 2008

  16,352   $ 16   $ 229,788      $ (2,777   $ (202,199   $ 3,298      $ —        $ 28,126     
                                                           

Issuance of common stock in connection with acquisition

  9,391     10     23,775        —          —          —          —          23,785     

Stock-based compensation expense

  —       —       347        —          —          —          —          347     

Comprehensive loss:

                 

Net loss

  —       —       —          —          (14,179     —          —          (14,179   $ (14,179

Foreign currency translation adjustment

  —       —       —          —          —          (139     —          (139     (139
                       

Comprehensive loss

  —       —       —          —          —          —          —          —        $ (14,318
                                                                 

Balances, December 31, 2009

  25,753   $ 26   $ 253,910      $ (2,777   $ (216,378   $ 3,159      $ —        $ 37,940     
                                                           

Issuance of common stock in connection with acquisition

  15,300     15     34,562        —          —          —          —          34,577     

Issuance of stock options in connection with acquisition

  —       —       3,007        —          —          —          —          3,007     

Repurchase of SCM treasury stock in connection with acquisition

  —       —       —          (2,880     —          —          —          (2,880  

Issuance of common stock

  —       —       (402     2,643        —          —          —          2,241     

Noncontrolling interest in a subsidiary

  —       —       —          —          —          —          3,057        3,057     

Stock-based compensation expense

  —       —       147        —          —          —          —          147     

Comprehensive loss:

                 

Net loss

  —       —       —          —          (6,052     —          (221     (6,273   $ (6,273

Foreign currency translation adjustment

  —       —       —          —          —          (1,860     (200     (2,060     (2,060
                       

Comprehensive loss

  —       —       —          —          —          —          —          —        $ (8,333
                                                                 

Balances, March 31, 2010

  41,053   $ 41   $ 291,224      $ (3,014   $ (222,430   $ 1,299      $ 2,636      $ 69,756     
                                                           

See notes to condensed consolidated financial statements.

 

5


Table of Contents

SCM MICROSYSTEMS, INC. AND SUBSIDIARIES

CONDENSED CONSOLIDATED STATEMENTS OF CASH FLOWS

(In thousands)

(unaudited)

 

     Three Months Ended
March 31,
 
     2010     2009  

Cash flows from operating activities:

    

Net loss

   $ (6,273   $ (3,043

Adjustments to reconcile net loss to net cash used in operating activities:

    

Loss (gain) from discontinued operations

     77        (104

Deferred income taxes

     —          (193

Depreciation and amortization

     1,133        83   

Gain on disposal of property and equipment

     —          (249

Accretion of liability to related party discount

     195        —     

Stock compensation expense

     147        61   

Interest on bank line of credit and mortgage loan

     36        —     

Loss on equity investments

     —          289   

Changes in operating assets and liabilities:

    

Accounts receivable

     415        3,362   

Inventories

     (243     (775

Other assets

     (540     (236

Accounts payable

     1,045        580   

Liability to related party

     (99     —     

Accrued expenses

     (151     193   

Income taxes payable

     (95     7   
                

Net cash used in operating activities from continuing operations

     (4,353     (25

Net cash provided by operating activities from discontinued operations

     58        441   
                

Net cash (used in) provided by operating activities

     (4,295     416   
                

Cash flows from investing activities:

    

Capital expenditures

     (328     (202

Cash acquired upon Bluehill ID acquisition

     4,266        —     

Proceeds from sale of assets, net

     —          249   

Maturities of short-term investments

     1,015        —     
                

Net cash provided by investing activities

     4,953        47   
                

Cash flows from financing activities:

    

Payment on bank line of credit and mortgage loan

     (174     —     

Issuance of common stock

     1,700        —     
                

Net cash provided by financing activities

     1,526        —     
                

Effect of exchange rates on cash and cash equivalents

     (267     (452
                

Net increase in cash and cash equivalents

     1,917        11   

Cash and cash equivalents at beginning of period

     4,836        20,550   
                

Cash and cash equivalents at end of period

   $ 6,753      $ 20,561   
                

See notes to condensed consolidated financial statements.

 

6


Table of Contents

SCM MICROSYSTEMS, INC. AND SUBSIDIARIES

NOTES TO CONDENSED CONSOLIDATED FINANCIAL STATEMENTS

MARCH 31, 2010

1. Basis of Presentation

The accompanying unaudited condensed consolidated financial statements of SCM Microsystems, Inc. (“SCM” or “the Company”) have been prepared in accordance with accounting principles generally accepted in the United States of America (“U.S. GAAP”) for interim financial information and with the instructions to Form 10-Q and the rules and regulations of the U.S. Securities and Exchange Commission (“SEC”). Accordingly, they do not include all of the information and footnotes required by U.S. GAAP for complete financial statements. In the opinion of management, all adjustments, including normal recurring adjustments, considered necessary for a fair presentation of Company’s unaudited condensed consolidated financial statements have been included. The results of operations for the three months ended March 31, 2010 are not necessarily indicative of the results that may be expected for the year ending December 31, 2010 or any future period. The information included in this Quarterly Report on Form 10-Q should be read in conjunction with “Management’s Discussion and Analysis of Financial Condition and Results of Operations,” “Risk Factors,” “Quantitative and Qualitative Disclosures About Market Risk,” and the Consolidated Financial Statements and footnotes thereto included in the Company’s Annual Report on Form 10-K for the year ended December 31, 2009. The preparation of unaudited condensed consolidated financial statements necessarily requires the Company to make estimates and assumptions that affect the reported amounts of assets and liabilities and disclosure of contingent assets and liabilities at the condensed consolidated balance sheet dates and the reported amounts of revenues and expenses for the periods presented.

On April 30, 2009, the Company acquired Hirsch Electronics Corporation (“Hirsch”), a privately-held California corporation that designs, engineers, manufactures and markets software, hardware and services in the security management system/physical access control market. The results for the acquired Hirsch business are included in the Company’s consolidated statements of operations since the April 30, 2009 acquisition. As a result of the timing of this acquisition, the Company’s operating results for the periods presented are not directly comparable.

On January 4, 2010, the Company acquired Bluehill ID AG, (“Bluehill ID”), a Swiss industrial holding group focused on the radio frequency identification (RFID)/identification and security industries. The results for the acquired Bluehill ID business are included in the Company’s consolidated statements of operations since the January 4, 2010 acquisition. As a result of the timing of this acquisition, the Company’s operating results for the periods presented are not directly comparable.

Discontinued Operations

The financial information related to the Company’s former Digital Television solutions (“DTV solutions”) business and retail Digital Video and Digital Media Reader business is reported as discontinued operations for all periods presented as discussed in Note 7.

Recent Accounting Pronouncements and Accounting Changes

In October 2009, the Financial Accounting Standard Board (“FASB”) issued Accounting Standards Update (“ASU”) No. 2009-14, Software (Topic 985) Certain Arrangements That Contain Software Elements — a consensus of the FASB Emerging Issues Task Force (“EITF”) (“ASU 2009-14”), which amends the scope of software revenue guidance in ASC Subtopic 985-605, Software-Revenue Recognition, to exclude tangible products containing software and non-software components that function together to deliver the product’s essential functionality.

In October 2009, the FASB issued ASU No. 2009-13, Revenue Recognition (Topic 605) Multiple-Deliverable Revenue Arrangements — a consensus of the FASB EITF (“ASU 2009-13”), which eliminates the residual method of allocation and requires the relative selling price method when allocating deliverables of a multiple-deliverable revenue arrangement. ASU 2009-13 specifies the best estimate of a selling price is consistent with that used to determine the price to sell the deliverable on a standalone basis.

ASU 2009-14 and ASU 2009-13 are effective prospectively for revenue arrangements entered into or materially modified in fiscal years beginning on or after June 15, 2010, and must be adopted in the same period using the same transition method. If

 

7


Table of Contents

SCM MICROSYSTEMS, INC. AND SUBSIDIARIES

NOTES TO CONDENSED CONSOLIDATED FINANCIAL STATEMENTS—(Continued)

MARCH 31, 2010

 

adoption is elected in a period other than the beginning of a fiscal year, the amendments in these standards must be applied retrospectively to the beginning of the fiscal year. Full retrospective application of these amendments to prior fiscal years is optional. The Company is currently assessing the timing of adoption and effects that ASU 2009-14 and ASU 2009-13 will have on its consolidated results of operations and financial condition.

In January 2010, the FASB issued ASU 2010-06 - Topic 820, Improving Disclosures About Fair Value Measurements, that require additional fair value disclosures. ASU 2010-06 requires disclosures about inputs and valuation techniques used to measure fair value as well as disclosures about significant transfers into and out of Levels 1 and 2, beginning in the first quarter of 2010. Additionally, this ASU require presentation of disaggregated activity within the reconciliation for fair value measurements using significant unobservable inputs (Level 3), beginning in the first quarter of 2011. The Company does not expect that the adoption of ASU 2010-06 will significantly impact its consolidated financial statements.

2. Acquisitions

Acquisition of Bluehill ID

The Company completed the acquisition of Bluehill ID on January 4, 2010 (the “acquisition date”), in accordance with the Business Combination Agreement dated as of September 20, 2009, as amended (the “Business Combination Agreement”). The results of Bluehill ID’s operations have been included in the consolidated financial statements since that date. Bluehill ID is a leading provider of automatic identification and RFID technologies, products, services and solutions used in the fields of security, identification, tracking and further growing applications. The majority of Bluehill ID sales are to customers in Europe. As a result of the acquisition the Company is a provider of leading-edge products and solutions in the areas of physical and logical access control, identity management and radio frequency identification (“RFID”) systems to governments, commercial and industrial enterprises and consumers. The Company expects to achieve significant synergies and cost reductions as a result of eliminating redundant processes and facilities.

Pursuant to the business combination agreement, the Company made an offer to the Bluehill ID shareholders to acquire all of the Bluehill ID shares and issued 0.52 new shares of the Company’s common stock for every one share of Bluehill ID tendered (the “Bluehill ID acquisition”). A total of 29,422,714, or approximately 92% of Bluehill ID shares outstanding were tendered in the offer and exchanged for a total of 15,299,797 new shares of the Company’s common stock. The issuance of the shares of the Company’s common stock to the former shareholders of Bluehill ID was approved by the stockholders of the Company at a special meeting held on December 18, 2009. Following the close of the transaction, approximately 38% of the outstanding shares of the Company are now held by former Bluehill ID shareholders.

Prior to the acquisition, Bluehill ID had granted to BH Capital Management AG (“BHCM”), a company controlled and owned by Ayman S. Ashour and Mountain Partners AG, an option to purchase up to 3,914,790 bearer shares in Bluehill ID at an exercise price of CHF 1.00 per share exercisable until June 30, 2014 pursuant to a Call Option Agreement dated September 8, 2009. Mr. Ashour is the former chief executive officer of Bluehill ID and the current Chairman and chief executive officer of the Company; Mountain Partners AG is a significant stockholder of the Company and an affiliate of Daniel S. Wenzel, a former director of Bluehill ID and currently a director of the Company. Pursuant to the terms of the Business Combination Agreement, these options were converted at the closing of the transaction into an option to purchase up to 2,035,691 shares of the Company’s common stock at an exercise price of Euro 1.28 per share.

The acquisition is accounted for under the acquisition method of accounting in accordance with ASC Topic 805 –Business Combinations (“ASC 805”). Under the acquisition method of accounting, the total purchase consideration, assets acquired, the liabilities assumed, and any noncontrolling interest in Bluehill ID is measured at fair value as of the acquisition date when control is obtained. The following table summarizes the consideration paid for Bluehill ID, the total fair value of net identifiable assets acquired at the acquisition date, the fair value of the noncontrolling interest in Bluehill ID and the resulting goodwill recorded (in thousands):

 

Fair value of common stock

   $ 34,577   

Fair value of options converted

     3,007   
        

Fair value of total consideration transferred

     37,584   

Fair value of noncontrolling interest

     3,057   
        

Fair value of controlling and noncontrolling interest

     40,641   

Fair value of Bluehill ID net identifiable assets acquired

     (19,665
        

Goodwill

   $ 20,976   
        

 

8


Table of Contents

SCM MICROSYSTEMS, INC. AND SUBSIDIARIES

NOTES TO CONDENSED CONSOLIDATED FINANCIAL STATEMENTS—(Continued)

MARCH 31, 2010

 

The fair value of the shares of the Company’s common stock issued in connection with the acquisition was determined using the closing market price of the Company’s common stock as of the acquisition date of $2.26 per share. The options were valued using the Black-Scholes option pricing model with the inputs of 0.8 for volatility, 4.5 years for expected life, 2.1% for the risk-free interest rate and a market value of the Company $2.26 per share as of the acquisition date. The acquisition-date fair value of the noncontrolling interests is derived by determining the fair value of the acquired business as a whole and then subtracting the consideration transferred by the Company for its controlling interest in Bluehill ID.

The following table summarizes the estimated fair value of the assets acquired and liabilities assumed at the acquisition date. The estimated fair value of the identifiable assets acquired and liabilities assumed in the acquisition is based on management’s best estimates. As the Company finalizes certain valuation assumptions, the provisional measurements of identifiable assets and liabilities, and the resulting goodwill and deferred income taxes are subject to change and the final purchase price accounting could be different from the amounts presented herein.

Assets acquired and liabilities assumed as of January 4, 2010 (in thousands):

 

Cash and cash equivalents

   $ 4,266   

Short-term investments

     1,080   

Accounts receivable

     2,914   

Inventories

     1,554   

Other current assets

     623   

Property and equipment

     4,136   

Mortgage loan and line of credit payable to bank

     (1,382

Accounts payable

     (2,653

Capital lease obligations

     (753

Liability to related party

     (357

Accrued expenses and other liabilities

     (4,995

Income taxes payable

     (548

Amortizable intangible assets:

  

Developed technology

     784   

Customer relationships

     10,918   

Order backlog

     734   

Intangible assets with indefinite lives (not subject to amortization):

  

Trade names

     1,491   

Deferred tax liabilities in connection with acquired intangible assets and inventory fair value adjustment, net

     (1,027
        
     16,785   

Fair value of Bluehill’s investment in SCM common stock

     2,880   
        

Fair value of Bluehill ID net identifiable assets acquired

   $ 19,665   
        

Intangible assets of $13.9 million consist primarily of developed technology, customer relationships, order backlogs and trade names. Developed technology relates to Bluehill ID’s technology which is currently generating revenue. Customer relationships relate to Bluehill ID’s ability to sell existing, in-process and future versions of its products to its existing customers. Trade names

 

9


Table of Contents

SCM MICROSYSTEMS, INC. AND SUBSIDIARIES

NOTES TO CONDENSED CONSOLIDATED FINANCIAL STATEMENTS—(Continued)

MARCH 31, 2010

 

represent future value to be derived associated with the use of existing trade names. Order backlog represents future revenue to be derived from confirmed orders. Developed technology and trade name was valued using the relief from royalty method based on discounted cash flow (“DCF”). The customer relationships and order backlog were valued using the multi period excess earnings approach (“Meem-approach”) on earnings before income tax (“EBIT”) based on DCF. The discount rate used in the present value calculations was derived from a weighted average cost of capital (“WACC”) analysis, adjusted to reflect additional risks related each asset characteristics. Based on these factors, a discount rate of 18.0% was deemed appropriate for valuing the intangible assets. Of the $13.9 million of acquired intangible assets, $1.5 million was preliminarily assigned to registered trade names that are not subject to amortization. The remaining amount of $12.4 million of acquired intangible assets is subject to amortization. The Company expects to amortize developed technology and customer relationships on a straight-line basis over their expected useful life of four to 10 years and order backlog over the expected useful life of one year.

Of the total purchase consideration, $21.0 million was recognized as goodwill. Goodwill represents the excess of the purchase consideration of an acquired business over the fair value of the underlying net assets acquired and liabilities assumed. The goodwill arising from the Bluehill ID acquisition is largely attributable to the synergies expected to be realized. Bluehill ID’s results are spread over the Company’s two reportable segments, “Identity Management Solutions & Services” and “Identification Products & Components.” The Company is in the process of determining the amount of goodwill that will be assigned to various reporting units as required in accordance with ASC Topic 350 — Intangibles — Goodwill and Other (“ASC 350”). None of the goodwill recorded as part of the Bluehill ID acquisition will be deductible for United States federal income tax purposes.

The Company recognized $0.3 million of acquisition related costs of Bluehill ID that were expensed in the quarter ending March 31, 2010. These costs are included as a part of general and administration costs in the condensed consolidated statement of operations.

Deferred tax assets and liabilities resulting from the acquisition of Bluehill ID have been netted, where applicable. As the identified intangible asset “trade names” has an indefinite life, the deferred tax liability of $0.3 million relating to the value of the trade names cannot be offset with deferred tax assets with a definite life. Resulting from these procedures, deferred tax liabilities of $0.7 million after netting with deferred tax assets and $0.3 million deferred tax liabilities relating to the indefinite life intangible asset have been considered in the purchase price allocation.

Utilization of net operating loss carryforwards, credit carryforwards, and other tax attributes may be subject to a substantial annual limitation due to ownership change limitations provided by the relevant jurisdictional tax laws and regulations. A substantial portion of the deferred tax assets acquired through the Bluehill ID acquisition is comprised of net operating losses. The future utilization of the Company’s net operating loss carryforwards to offset future taxable income may be subject to an annual limitation as a result of ownership changes that may have occurred prior to, or in connection with, the Company’s acquisition of Bluehill ID. The Company has determined that there was a change in ownership event with respect to Bluehill ID, effective January 2010, and is currently analyzing the impact on the financial statements. Although this may have an impact on the Company’s ability to utilize some or all of the NOL carryforwards, the Company believes any effect on the financial statements, as a result of this analysis, would be minimal.

The amounts of revenue and earnings of Bluehill ID included in the company’s condensed consolidated statement of operations from the acquisition date to the period ending March 31, 2010 are as follows (in thousands):

 

Revenues

   $ 4,262

Net loss

     2,720

Acquisition of Hirsch

The Company completed the acquisition of Hirsch on April 30, 2009 (the “acquisition date”). In exchange for all of the outstanding capital stock of Hirsch, SCM paid approximately $14.2 million in cash, issued approximately 9.4 million shares of SCM common stock, and issued warrants to purchase approximately 4.7 million shares of SCM common stock at an exercise price of $3.00 with a five-year term, exercisable for two years following the third anniversary of the closing date. In addition, each warrant to purchase shares of Hirsch common stock outstanding immediately prior to the effective date of the Hirsch acquisition was converted into a warrant to purchase the number of shares of SCM common stock equal to the number of shares of Hirsch common stock that could have been purchased upon the full exercise of such warrants, multiplied by the conversion ratio of 3.307888, rounded down to the nearest whole share. The per share exercise price for each converted warrant to purchase SCM common stock was determined by dividing the per share exercise price of the Hirsch common stock subject to each warrant

 

10


Table of Contents

SCM MICROSYSTEMS, INC. AND SUBSIDIARIES

NOTES TO CONDENSED CONSOLIDATED FINANCIAL STATEMENTS—(Continued)

MARCH 31, 2010

 

as in effect immediately prior to the effective date of the acquisition by the conversion ratio, and rounding that result up to the nearest cent. The conversion ratio was obtained by dividing the estimated aggregate value of the Hirsch acquisition consideration per share of Hirsch common stock, by the 30-day volume weighted average price of SCM’s common stock (as reported on the NASDAQ Stock Market during the 30 days preceding the day prior to the day of the acquisition date).

The Hirsch acquisition was accounted for under the acquisition method of accounting under ASC 805. The total purchase consideration was determined to be $38.0 million as of the acquisition date. The following table summarizes the consideration paid for Hirsch and the amounts of the assets acquired and liabilities assumed at the acquisition date. The fair value of the shares of SCM common stock issued in connection with the Hirsch acquisition was determined using the closing price of SCM’s common stock as of the acquisition date of $2.37 per share.

Fair value of consideration transferred (in thousands):

 

Cash paid for Hirsch common stock

   $ 14,167

Fair value of common stock issued

     22,258

Fair value of warrants issued

     1,327

Fair value of warrants converted

     200
      

Total purchase consideration

   $ 37,952
      

Fair value of the assets acquired and liabilities assumed at the acquisition date (in thousands):

 

Cash and cash equivalents

   $ 3,275   

Accounts receivable, net

     2,832   

Inventories

     1,649   

Other assets

     437   

Deferred income taxes and taxes receivable

     1,085   

Property and equipment

     262   

Amortizable intangible assets:

  

Developed technology

     4,600   

Customer relationships

     10,350   

Intangible assets with indefinite lives (not subject to amortization):

  

Trade names

     7,800   

Accounts payable

     (1,814

Accrued expenses

     (467

Other liabilities

     (192

Deferred tax liabilities and taxes payable

     (1,957

Deferred tax liabilities in connection with acquired tangible assets with indefinite lives

     (3,003

Fair value of liabilities assumed to related parties

     (8,800

Goodwill

     21,895   
        

Total purchase consideration

   $ 37,952   
        

The identified intangible assets of $22.8 million consist of core technology, trade names and customer relationships. Developed technology relates to Hirsch’s current products. Customer relationships relate to Hirsch’s ability to sell existing, in-process and future versions of its products to its existing customers. Trade names represent future value to be derived associated with the use of existing trade names. The Company expects to amortize developed technology and customer relationships on a straight-line basis over their expected useful life of 15 years. Assumed liabilities to related parties are estimated based on contractual payments to be made in future periods through 2020. The Company estimated the acquisition date fair value of this liability based on a discounted cash flow valuation technique.

Of the total purchase consideration, $21.9 million was recognized as goodwill. Goodwill represents the excess of the purchase consideration of an acquired business over the fair value of the underlying net assets and liabilities. Hirsch’s results are included in the Company’s reportable segment, “Identity Management Solutions and Services.” None of the goodwill recorded as part of the Hirsch acquisition will be deductible for United States federal income tax purposes.

 

11


Table of Contents

SCM MICROSYSTEMS, INC. AND SUBSIDIARIES

NOTES TO CONDENSED CONSOLIDATED FINANCIAL STATEMENTS—(Continued)

MARCH 31, 2010

 

Deferred tax assets and liabilities resulting from the acquisition of Hirsch have been netted, where applicable. As the identified intangible asset “trade names” has an indefinite life, the deferred tax liability of $3.0 million relating to the value of the trade names cannot be offset with deferred tax assets with a definite life. Resulting from these procedures, deferred tax liabilities of $1.7 million after netting with deferred tax assets and $3.0 million deferred tax liabilities relating to the indefinite life intangible asset have been considered in the purchase price allocation.

Following the Hirsch acquisition, Hirsch Electronics LLC has become part of the U.S. tax group of the SCM entities. Accordingly, the deferred tax liability of $1.7 million, as described above, has been netted with SCM’s existing deferred tax assets. The carrying value of SCM’s net deferred tax assets reflects that the Company has been unable to generate sufficient taxable income in certain tax jurisdictions. A valuation allowance is provided for deferred tax assets if it is more likely than not these items will either expire before SCM is able to realize their benefit, or that future deductibility is uncertain. As a result of netting the deferred tax liability of $1.7 million with SCM’s existing deferred tax assets, there is a $1.7 million release of SCM’s valuation allowance. In accordance with ASC 805, the release of the valuation allowance was booked as a tax benefit in the 2009 second quarter financial statements.

Pro forma financial information:

The results for the acquired Bluehill and Hirsch business are included in the Company’s consolidated statements of operations since their respective acquisition dates. As a result of the timing of these acquisitions, the Company’s condensed consolidated results for the periods presented are not directly comparable. The pro forma financial information is presented for informational purposes only and is not intended to represent or be indicative of the results of operations that would have been achieved if the Bluehill and Hirsch acquisitions had been completed as of the date indicated, and should not be taken as representative of the Company’s future consolidated results of operations or financial condition. The unaudited pro forma financial information in the table below summarizes the combined results of operations of SCM, Bluehill and Hirsch, as though these acquisitions had occurred as of the beginning of the periods presented. Preparation of the pro forma financial information for all periods presented required management to make certain judgments and estimates to determine the pro forma adjustments such as purchase accounting adjustments, which include, among others, cost of sales resulted from step up of inventory at fair value, amortization charges from acquired intangible assets, and income tax effects.

Pro forma results of operations for the three months ended March 31, 2010 and 2009 are as follows (in thousands, unaudited):

 

     Three Months Ended
March 31,
 
     2010     2009  

Revenues

   $ 15,346      $ 15,122   

Net loss attributable to SCM Microsystems, Inc.

     (6,052     (5,824

Weighted average common shares outstanding used in loss per common share - basic and diluted

     39,755        40,435   
                

Net loss per common share - basic and diluted

   $ (0.15   $ (0.14
                

3. Fair Value Measurements

ASC 820 establishes a fair value hierarchy that requires an entity to maximize the use of observable objective inputs and minimize the use of unobservable inputs, which require additional reliance on the Company’s judgment, when measuring fair value. A financial instrument’s categorization within the fair value hierarchy is based upon the lowest level of input that is significant to the fair value measurement. ASC 820 establishes three levels of inputs that may be used to measure fair value:

 

   

Level 1 – Quoted prices for identical instruments in active markets;

 

   

Level 2 – Quoted prices for similar instruments in active markets, quoted prices for identical or similar instruments in markets that are not active and model-derived valuations, in which all significant inputs are observable in active markets; and

 

   

Level 3 – Valuations derived from valuation techniques, in which one or more significant inputs are unobservable.

 

12


Table of Contents

SCM MICROSYSTEMS, INC. AND SUBSIDIARIES

NOTES TO CONDENSED CONSOLIDATED FINANCIAL STATEMENTS—(Continued)

MARCH 31, 2010

 

The Company uses the following classifications to measure different financial instruments at fair value, including an indication of the level in the fair value hierarchy in which each instrument is generally classified:

Cash equivalents include highly liquid debt investments (money market fund deposits, commercial paper and treasury bills) with maturities of three months or less at the date of acquisition. These financial instruments are classified in Level 1 of the fair value hierarchy.

Assets that are measured and recognized at fair value on a recurring basis classified under the appropriate level of the fair value hierarchy as of March 31, 2010 and December 31, 2009 were as follows (in thousands):

 

     March 31, 2010    December 31, 2009
     Level 1    Level 2    Level 3    Total    Level 1    Level 2    Level 3    Total

Money market fund deposits

   $ 1,953    $ —      $ —      $ 1,953    $ 1,327    $ —      $ —      $ 1,327

Money market fund deposits are included in the cash and cash equivalents on the Company’s consolidated balance sheets.

Non-financial assets that are measured and recognized at fair value on a non-recurring basis as of March 31, 2010 are as follows (in thousands):

 

     Level 1    Level 2    Level 3    Total

Goodwill

   $ —      $ —      $ 41,618    $ 41,618

Acquired intangibles

     —        —        34,344      34,344
                           

Total:

   $ —      $ —      $ 75,962    $ 75,962
                           

The valuation of the acquired intangible assets is classified as a Level 3 measurement, because it was based on significant unobservable inputs and involved management judgment and assumptions about market participants and pricing. In determining fair value of the acquired intangible assets, the Company determined the appropriate unit of measure, the exit market and the highest and best use for the assets, in accordance with ASC 820. The fair value of acquired trade names and existing technology was determined using the relief from royalty approach and the fair value of the acquired company’s customer relationships was determined using the excess earnings approach. See Note 2 for further discussion on the acquisitions. The discount rate used in the valuation of the intangible assets was derived from a weighted average cost of capital analysis.

As of March 31, 2010 and December 31, 2009, there were no liabilities that are measured and recognized at fair value on a recurring basis.

4. SCM Microsystems Inc. Shareholders’ Equity

Stock Option Plans

The Company has a stock-based compensation program that provides its Board of Directors discretion in creating employee equity incentives. This program includes incentive and non-statutory stock options under various plans, the majority of which are stockholder approved. Stock options are generally time-based and expire seven to ten years from the date of grant. Vesting varies, with some options vesting 25% each year over four years; some vesting   1/12th  per month over one year; some vesting 100% after one year; and some vesting   1/12th  per month, commencing four years from the date of grant.

The Company had a Director Option Plan and a 1997 Stock Option Plan, both of which expired in March 2007 and as a result, options can no longer be granted under these plans. As of March 31, 2010, an aggregate of approximately 0.6 million granted options were outstanding under these two plans which remain exercisable in accordance with the terms of the original grant agreements. In addition, the Company has a 2000 Stock Option Plan, pursuant to which options to purchase 0.8 million shares of the Company’s common stock may be granted. As of March 31, 2010, 0.5 million granted options were outstanding under the 2000 Stock Option Plan. In November 2007, the Company’s Board of Directors and stockholders approved the 2007 Stock Option Plan, pursuant to which options to purchase 1.5 million shares of our common stock may be granted. In October 2009, stockholders approved an increase of 2.0 million shares to the number of shares of common stock reserved for issuance under the 2007 Stock Option Plan, resulting in an aggregate of 3.5 million shares available for grant. As of March 31, 2010, 1.3 million granted options were outstanding under the 2007 Stock Option Plan.

 

13


Table of Contents

SCM MICROSYSTEMS, INC. AND SUBSIDIARIES

NOTES TO CONDENSED CONSOLIDATED FINANCIAL STATEMENTS—(Continued)

MARCH 31, 2010

 

A summary of the activity under the Company’s stock option plans for the three months ended March 31, 2010 is as follows:

 

     Available
for Grant
    Number of
Options
Outstanding
    Weighted
Average
Exercise Price
per share
   Aggregate
Intrinsic
Value
   Weighted
Average
Remaining
Contractual
Life (in years)

Balance at December 31, 2009

   2,487,374      2,345,271      $ 4.57    $ 21,736    5.48
                          

Options granted

   (45,000   45,000      $ 2.05      —      —  

Options cancelled or expired

   149,761      (55,676   $ 5.29      —      —  
                    

Balance at March 31, 2010

   2,592,135      2,334,595      $ 4.51    $ 11,086    5.04
                          

Vested or expected to vest at March 31, 2010

     2,155,491      $ 4.65    $ 9,431    4.94
                      

Exerciseable at March 31, 2010

     1,126,101      $ 6.37    $ 2,188    3.99
                      

The weighted-average grant date fair value per option for options granted during the three months ended March 31, 2010 and 2009 was $1.90 and $1.00, respectively. There were no exercises of options during the three months ended March 31, 2010 and 2009. At March 31, 2010, there was $1.0 million of unrecognized stock-based compensation expense, net of estimated forfeitures related to non-vested options, that is expected to be recognized over a weighted-average period of 2.4 years.

The fair value of option grants was estimated by using the Black-Scholes-Merton model with the following weighted-average assumptions for the three months ended March 31, 2010 and 2009, respectively:

 

     Three Months Ended March 31,  
     2010     2009  

Expected volatility

   85   66

Dividend yield

   0      0   

Risk-free interest rate

   1.95   1.52

Expected term (in years)

   4.00      4.00   

Expected Volatility: The Company’s computation of expected volatility for the three months ended March 31, 2010 is based on the historical volatility of the Company’s stock for a time period equivalent to the expected term.

Dividend Yield: The dividend yield assumption is based on the Company’s history and expectation of dividend payouts.

Risk-Free Interest Rate: The risk-free interest rate is based on the U.S. Treasury yield curve in effect at the time of grant for the expected term of the option.

Expected Term: The Company’s expected term represents the period that the Company’s stock-based awards are expected to be outstanding and was determined for the three months ended March 31, 2010 based on historical experience of similar awards, giving consideration to the contractual terms of the stock-based awards, vesting schedules and expectations of future employee behavior.

Forfeitures Rate: Compensation expense recognized in the consolidated statement of operations for the three-month periods ended March 31, 2010 and 2009 is based on awards ultimately expected to vest and it reflects estimated forfeitures. ASC Topic 718, Compensation-Stock Compensation, requires forfeitures to be estimated at the time of grant and revised, if necessary, in subsequent periods if actual forfeitures differ from those estimates.

 

14


Table of Contents

SCM MICROSYSTEMS, INC. AND SUBSIDIARIES

NOTES TO CONDENSED CONSOLIDATED FINANCIAL STATEMENTS—(Continued)

MARCH 31, 2010

 

Common Stock Reserved for Future Issuance

As of March 31, 2010, the Company had reserved an aggregate of approximately 4.9 million shares of common stock for future issuance under its stock option plans.

Stock-Based Compensation Expense

The following table illustrates the stock-based compensation expense resulting from stock options included in the unaudited condensed consolidated statements of operations for the three months ended March 31, 2010 and 2009 (in thousands):

 

     Three Months Ended
March 31,
     2010    2009

Cost of revenue

   $ 6    $ 6

Research and development

     17      11

Selling and marketing

     60      30

General and administrative

     64      14
             

Stock-based compensation expense before income taxes

   $ 147    $ 61

Income tax benefit

     0      0
             

Stock-based compensation expense after income taxes

   $ 147    $ 61
             

Warrants

As described in Note 2, as part of the consideration paid by the Company in connection with the acquisition of Hirsch, the Company issued approximately 4.7 million warrants to purchase shares of the Company’s common stock at an exercise price of $3.00 in exchange for the outstanding capital stock of Hirsch. In connection with the acquisition, the Company also issued warrants to purchase 205,072 shares of Company’s common stock at exercise prices in the range between $2.42 and $3.03 with a weighted average exercise price of $2.79, in exchange for outstanding Hirsch warrants.

All warrants will become exercisable for a period of two years on April 30, 2012.

Comprehensive Loss Attributable to SCM Microsystems, Inc.

Comprehensive loss consists of the following (in thousands):

 

     Three Months Ended
March 31
 
     2010     2009  

Net loss

   $ (6,273   $ (3,043

Other comprehensive loss

    

Change in foreign currency translation adjustment

   $ (2,060   $ (699
                

Total comprehensive loss

   $ (8,333   $ (3,742

Less: comprehensive loss attributable to noncontrolling interest

     421        —     
                

Comprehensive loss attributable to SCM Microsystems, Inc.

   $ (7,912   $ (3,742
                

 

15


Table of Contents

SCM MICROSYSTEMS, INC. AND SUBSIDIARIES

NOTES TO CONDENSED CONSOLIDATED FINANCIAL STATEMENTS—(Continued)

MARCH 31, 2010

 

5. Inventories

Inventories consist of (in thousands):

 

     March 31,    December 31,
     2010    2009

Raw materials

   $ 2,352    $ 1,434

Work-in-process

     585      665

Finished goods

     3,745      3,280
             

Total

   $ 6,682    $ 5,379
             

6. Goodwill and Intangible Assets

Goodwill

The changes in the carrying amount of goodwill during the three months ended March 31, 2010 are as follows (in thousands):

 

Balance as of December 31, 2009

   $ 21,895   

Goodwill acquired during the period

     20,976   

Foreign currency translation

     (1,253
        

Balance as of March 31, 2010

   $ 41,618   
        

During the three months ended March 31, 2010, the Company recorded goodwill of $21.0 million in connection with its acquisition of Bluehill ID as described in Note 2. The goodwill amount related to Bluehill acquisition was adjusted as of March 31, 2010 for the difference in foreign exchange rates between the acquisition date and quarter end. In accordance with ASC 350, the Company tests its goodwill and any other intangibles with indefinite lives annually for impairment and assesses whether there are any indicators of impairment on an interim basis. Management did not identify any impairment indicators during the three months ended March 31, 2010.

Intangible Assets

The following table summarizes the gross carrying amount and accumulated amortization for the intangible assets resulting from the acquisitions:

 

(In thousands)    Order
Backlog
    Existing
Technology
    Customer
Relationships
    Trade Name     Total  

Cost:

          

Amortization period

     1 year        10 - 15 years        4 - 15 years        Indefinite life     

Balance at December 31, 2009

   $ —        $ 4,600      $ 10,350      $ 7,800      $ 22,750   

Acquired as a part of Bluehill acquisition

     734        784        10,918        1,491      $ 13,927   

Currency translation adjustment

     (44     (47     (652     (89   $ (832
                                        

Balance at March 31, 2010

   $ 690      $ 5,337      $ 20,616      $ 9,202      $ 35,845   
                                        

Accumulated Amortization:

          

Balance at December 31, 2009

   $ —        $ 208      $ 460      $ —        $ 668   

Amortization expense

     182        97        585        —        $ 864   

Currency translation adjustment

     (9     (1     (21     —        $ (31
                                        

Balance at March 31, 2010

   $ 173      $ 304      $ 1,024      $ —        $ 1,501   
                                        

Intangible assets, net at March 31, 2010

   $ 517      $ 5,033      $ 19,592      $ 9,202      $ 34,344   
                                        

 

16


Table of Contents

SCM MICROSYSTEMS, INC. AND SUBSIDIARIES

NOTES TO CONDENSED CONSOLIDATED FINANCIAL STATEMENTS—(Continued)

MARCH 31, 2010

 

As discussed in Note 2, during the three months ended March 31, 2010, intangible assets increased by $13.9 million in connection with the acquisition of Bluehill ID, of which $12.4 million are related to order backlog, existing technology and customer relationships and are subject to amortization, and $1.5 million are related to trade names which are determined to have an indefinite useful life. This was partly offset by the foreign currency translation adjustment for the difference in foreign exchange rates between the acquisition date and quarter end.

Trade names are not subject to amortization in accordance with ASC 350; however, they are reviewed for impairment on an annual basis, or more frequently if events or changes in circumstances indicate that the asset might be impaired.

These intangible assets will be amortized over their useful lives. Amortization expense of these acquired intangible assets for the three months ended March 31, 2010 was $0.9 million, of which $0.3 million was included in cost of revenue and $0.6 million was included in selling and marketing expense in the condensed consolidated statements of operations.

The estimated future amortization expense of purchased intangible assets with definite lives for the next five years is as follows (in millions):

 

Year ending December 31:

  

2010 (remaining nine months)

   $ 2,607

2011

     2,743

2012

     2,743

2013

     2,743

2014

     1,783

2015 and thereafter

     12,523
      

Total

   $ 25,142
      

7. Discontinued Operations

During 2003, the Company completed two transactions to sell its retail Digital Video and Digital Media Reader business. During 2006, the Company completed the sale of substantially all the assets and some of the liabilities associated with its DTV solutions business. In accordance with ASC Topic 360, Property, Plant and Equipment (“ASC 360”), for the three months ended March 31, 2010 and 2009, the operating results of these businesses have been presented as discontinued operations in the condensed consolidated statements of operations and cash flows.

The operating results for the discontinued operations of the DTV solutions business and Digital Video and Digital Media Reader business for the three months ended March 31, 2010 and 2009 are as follows (in thousands):

 

     Three Months Ended March 31,  
     2010     2009  

Operating loss

   $ (81   $ (4

(Loss) income before income taxes

   $ (120   $ 34   

Income tax benefit

   $ —        $ 33   

(Loss) gain from discontinued operations

   $ (120   $ 67   

8. Mortgage Loan and Line of Credit Payable to Bank

In connection with its acquisition of Bluehill ID, the Company acquired an obligation for a mortgage loan and a related revolving line of credit payable to a bank. The mortgage loan and the revolving line of credit are related to one of the 100% owned subsidiaries of Bluehill ID. The mortgage loan and the line of credit are secured by the land and building to which it relates as well as total inventory, machinery, stock, products and raw materials. Amounts outstanding under the mortgage loan accrue interest at 5.50%, and interest is payable monthly. The term of the mortgage loan will mature in 2026. The Company is obligated to pay a monthly amount of €3,500 over the life of the loan towards principal amount in addition to monthly interest

 

17


Table of Contents

SCM MICROSYSTEMS, INC. AND SUBSIDIARIES

NOTES TO CONDENSED CONSOLIDATED FINANCIAL STATEMENTS—(Continued)

MARCH 31, 2010

 

payments. The total amount that can be advanced under the line of credit is €240,000. The advances on the revolving line of credit accrue interest at a base rate determined by the bank plus 2% (6.75% at March 31, 2010), payable quarterly. Any advances over the limit of €240,000 will accrue interest at 10.75%. The revolving line of credit is ongoing with no specific end date. The Company recorded an interest expense of €23,000 or $36,000 during the quarter ending March 31, 2010. As of March 31, 2010, approximately €708,000, or $1.0 million was outstanding under the mortgage loan and, €164,000 or $220,000 advances were outstanding under the revolving line of credit.

9. Restructuring and Other Charges

In 2010, the Company implemented a restructuring plan (the “2010 Restructuring Plan”) in an effort to better align its business operations with the current market and macroeconomic conditions. The 2010 Restructuring Plan included a worldwide workforce reduction, the restructuring of certain business functions and the closure of certain facilities. The Company incurred restructuring charges of $264,000 and paid $41,000 for severance and facilities-related charges associated with the 2010 Restructuring Plan during the three months ended March 31, 2010.

Accrued liabilities related to restructuring actions and other activities during the three months ended March 31, 2010 and during the year ended December 31, 2009 consist of the following (in thousands):

 

     Lease/Contract
Commitments
    Other Costs     Total  

Balances as of January 1, 2009

   $ 1,230      $ 330      $ 1,560   

Changes in estimates

     (157     —          (157

Payments and other changes in 2009

     (394     10        (384
                        

Balances as of December 31, 2009

     679        340        1,019   

Provision for Q1 2010

     248        16        264   

Changes in estimates

     (44     —          (44

Payments and other changes in Q1 2010

     (139     (21     (160
                        

Balances as of March 31, 2010

   $ 744      $ 335      $ 1,079   
                        

10. Segment Reporting, Geographic Information and Major Customers

ASC 280, Segment Reporting, establishes standards for the reporting by public business enterprises of information about operating segments, products and services, geographic areas, and major customers. The method for determining what information to report is based on the way that management organizes the operating segments within the Company for making operating decisions and assessing financial performance. An operating segment is defined as a component of an enterprise that engages in business activities from which it may earn revenue and incur expenses and about which separate financial information is available. The Company’s chief operating decision makers (“CODM”) are considered to be its executive staff, consisting of the Chief Executive Officer; Chief Financial Officer; Chief Operating Officer; Executive Vice President for Transition Management & Acquisition Integration; Executive Vice President of Technology and Product Management; Executive Vice President and President, Hirsch business; and Executive Vice President and CEO, SCM Microsystems business.

Prior to January 4, 2010, the Company operated in two business segments, Security and Identity Solutions and Digital Media and Connectivity. Following the Company’s acquisition of Bluehill ID on January 4, 2010, the Company now operates in two different business segments that reflect the Company’s current organizational structure and focus on providing secure identification solutions. The Company’s new reportable segments are Identity Management Solutions & Services (“ID Management”) and Identification Products & Components (“ID Products”). Each business segment is comprised of two or more businesses within the Company that focus on specific markets and technologies. Businesses in the ID Management segment include Hirsch Electronics and Multicard; businesses in the ID Products segment include SCM Microsystems, TagStar Systems, Arygon Technologies, ACiG Technology and Syscan ID. The new reportable segments are not comparable with the business segments formerly reported by the Company.

 

18


Table of Contents

SCM MICROSYSTEMS, INC. AND SUBSIDIARIES

NOTES TO CONDENSED CONSOLIDATED FINANCIAL STATEMENTS—(Continued)

MARCH 31, 2010

 

The executive staff reviews financial information and business performance along the ID Management and ID Products segments. The Company evaluates the performance of its segments at the revenue and gross margin level. The Company’s reporting systems do not track or allocate operating expenses by segment. The CODM does not evaluate operating segments using discrete asset information. The Company does not include intercompany transfers between these two business segments for the purpose of assessing financial performance.

Summary information by segment for the three months ended March 31, 2010 and 2009 is as follows (in thousands):

 

     Three Months Ended  
     March 31,  
     2010     2009  

ID Management:

    

Net revenue

   $ 8,103      $ —     

Gross profit

     4,084        —     

Gross profit %

     50     —     

ID Products:

    

Net revenue

   $ 7,243      $ 5,155   

Gross profit

     2,121        2,113   

Gross profit %

     29     41

Total:

    

Net revenue

   $ 15,346      $ 5,155   

Gross profit

     6,205        2,113   

Gross profit %

     40     41

Geographic net revenue is based on selling location. Information regarding net revenue by geographic region is as follows (in thousands):

 

     Three Months Ended  
     March 31,  
     2010     2009  

Net revenue

    

Americas

   $ 8,614      $ 2,118   

Europe and Middle East

     5,144        2,170   

Asia-Pacific

     1,588        867   
                

Total

   $ 15,346      $ 5,155   
                

% of net revenue

    

Americas

     56     41

Europe and Middle East

     34     42

Asia-Pacific

     10     17

Long-lived assets by geographic location as of March 31, 2010 and December 31, 2009, are as follows (in thousands):

 

     March 31,    December 31,
     2010    2009

Property and equipment, net:

     

Americas

   $ 263    $
242

Europe and Middle East

     4,069      385

Asia-Pacific

     193      56
             

Total

   $ 4,525    $ 683
             

 

19


Table of Contents

SCM MICROSYSTEMS, INC. AND SUBSIDIARIES

NOTES TO CONDENSED CONSOLIDATED FINANCIAL STATEMENTS—(Continued)

MARCH 31, 2010

 

11. Commitments

The Company leases its facilities, certain equipment, and automobiles under non-cancelable operating lease agreements. Those lease agreements existing as of March 31, 2010 expire at various dates during the next four years.

Purchases for inventories are highly dependent upon forecasts of customer demand. Due to the uncertainty in demand from its customers, the Company may have to change, reschedule, or cancel purchases or purchase orders from its suppliers. These changes may lead to vendor cancellation charges on these purchases or contractual commitments. The following table summarizes the Company’s principal contractual obligations as of March 31, 2010:

 

(In thousands)    Operating
Lease
   Purchase
Commitments
   Other
Contractual
Obligations
   Total

2010 (remaining nine months)

   $ 1,962    $ 8,999    $ 1,024    $ 11,985

2011

     1,608      2,438      789    $ 4,835

2012

     724      —        526    $ 1,250

2013

     133      —        —      $ 133

2014 and thereafter

     78      —        —      $ 78
                           
   $ 4,505    $ 11,437    $ 2,339    $ 18,281
                           

The Company provides warranties on certain product sales, which range from twelve to twenty-four months, and allowances for estimated warranty costs are recorded during the period of sale. The determination of such allowances requires the Company to make estimates of product return rates and expected costs to repair or to replace the products under warranty. The Company currently establishes warranty reserves based on historical warranty costs for each product line combined with liability estimates based on the prior 12 months’ sales activities. If actual return rates and/or repair and replacement costs differ significantly from the Company’s estimates, adjustments to recognize additional cost of sales may be required in future periods. Historically the Company’s warranty accrual and the expense amounts have been immaterial.

12. Net Loss per Common Share Attributable to SCM Microsystems, Inc.

The following table sets forth the computation of basic and diluted net loss per common share attributable to SCM Microsystems, Inc. (in thousands, except per share amounts):

 

     For the Three Months  Ended
March 31,
 
     2010     2009  

Net (loss) income attributable to SCM Microsystems, Inc.

    

Continuing operations

   $ (5,975   $ (3,147

Discontinued operations

     (77     104   
                

Net loss attributable to SCM Microsystems, Inc.

   $ (6,052   $ (3,043
                

Weighted-average shares used in (loss) income per common share - basic and diluted

     39,755        15,744   

Net (loss) income per common share attributable to SCM Microsystems, Inc. - basic and diluted

    

Continuing operations

   $ (0.15   $ (0.20

Discontinued operations

   $ (0.00   $ 0.01   
                

Net loss per common share attributable to SCM Microsystems, Inc. - basic and diluted

   $ (0.15   $ (0.19
                

As the Company has incurred losses from continuing operations for the periods presented, shares issuable under stock options are excluded from the computation of diluted earnings per share as their effect is anti-dilutive.

 

20


Table of Contents

SCM MICROSYSTEMS, INC. AND SUBSIDIARIES

NOTES TO CONDENSED CONSOLIDATED FINANCIAL STATEMENTS—(Continued)

MARCH 31, 2010

 

13. Legal Proceedings

From time to time, the Company could be subject to claims arising in the ordinary course of business or be a defendant in lawsuits. While the outcome of such claims or other proceedings cannot be predicted with certainty, the Company’s management expects that any such liabilities, to the extent not provided for by insurance or otherwise, will not have a material adverse effect on the Company’s financial condition, results of operations or cash flows.

14. Subsequent Events

On April 14, 2010, SCM completed the acquisition of RockWest Technology Group (“Rockwest”), a privately held provider of identification and security solutions (the “acquisition”) pursuant to a Share Purchase Agreement between the Company, RockWest and certain sellers of RockWest dated March 30, 2010 and amended April 9, 2010 (the “Share Purchase Agreement, as amended”).

Under the Share Purchase Agreement, as amended, the Company issued an aggregate of 2.6 million shares of its common stock to George Levy, Matt McDaniel, Hugo Garcia and Stan McKinney (the “Sellers”) as consideration for the acquisition. The shares issued to the Sellers are subject to a 24-month lock-up from the closing date of the acquisition. Additionally, the Sellers are eligible to receive limited earn-out payments, subject to the satisfaction of conditions specified in the Share Purchase Agreement, as amended, in the form of shares of common stock.

RockWest provides identity management solutions and services to the education, government, corporate, casino and healthcare markets in the southwest region of the U.S. The company was founded in 1999 and is based in Denver, Colorado, with branch offices in California, Arizona and New Mexico, employing 43 people.

The Company believes that RockWest’s focus on identity credential issuance and personalization and identification system integration complements the Company’s ID Management business. Following the transaction, RockWest is expected to be integrated into the Company’s Multicard business and provide a portal for Multicard’s entry into the U.S. marketplace.

 

Item 2. Management’s Discussion and Analysis of Financial Condition and Results of Operations

This Quarterly Report on Form 10-Q contains forward-looking statements for purposes of the safe harbor provisions under Section 27A of the Securities Act of 1933, as amended, and Section 21E of the Securities Exchange Act of 1934, as amended. For example, statements, other than statements of historical facts regarding our strategy, future operations, financial position, projected results, estimated revenues or losses, projected costs, prospects, plans, market trends, competition and objectives of management constitute forward-looking statements. In some cases, you can identify forward-looking statements by terms such as “will,” “believe,” “could,” “should,” “would,” “may,” “anticipate,” “intend,” “plan,” “estimate,” “expect,” “project” or the negative of these terms or other similar expressions. Although we believe that our expectations reflected in or suggested by the forward-looking statements that we make in this Quarterly Report on Form 10-Q are reasonable, we cannot guarantee future results, performance or achievements. You should not place undue reliance on these forward-looking statements. All forward-looking statements speak only as of the date of this Quarterly Report on Form 10-Q. While we may elect to update forward-looking statements at some point in the future, we specifically disclaim any obligation to do so, even if our expectations change, whether as a result of new information, future events or otherwise. We also caution you that such forward-looking statements are subject to risks, uncertainties and other factors, not all of which are known to us or within our control, and that actual events or results may differ materially from those indicated by these forward-looking statements. We disclose some of the important factors that could cause our actual results to differ materially from our expectations under “Part II - Item 1A, Risk Factors” and elsewhere in this Quarterly Report on Form 10-Q. These cautionary statements qualify all of the forward-looking statements included in this Quarterly Report on Form 10-Q that are attributable to us or persons acting on our behalf.

The following information should be read in conjunction with the unaudited condensed consolidated financial statements and notes thereto set forth in Part I - Item 1 of this Quarterly Report on Form 10-Q. We also urge readers to review and consider our disclosures describing various factors that could affect our business, including the disclosures under the headings “Management’s Discussion and Analysis of Financial Condition and Results of Operations” and “Risk Factors” and the audited financial statements and notes thereto contained in our Annual Report on Form 10-K for the year ended December 31, 2009.

 

21


Table of Contents

Overview

SCM Microsystems, Inc. d/b/a Identive Group (“Identive,” the “Company,” “we” and “us”) is an international technology company focused on building the world’s signature group in secure identification-based technologies. The businesses within Identive have deep industry expertise and are well-known global brands in their individual markets, providing leading-edge products and solutions in the areas of physical and logical access control, identity management and radio frequency identification (“RFID”) systems to governments, commercial and industrial enterprises and consumers. Our growth model is based on a combination of strong technology-driven organic growth from the businesses within the group and disciplined acquisitive expansion.

At the beginning of 2010, we acquired Bluehill ID AG (“Bluehill ID”), which focuses on technologies and investments within the high-growth security and identity management markets. As a result of this business combination, we have put in place a new organizational structure, enhanced and broadened our management team, adopted a new name and are now doing business as “Identive Group.” We intend to seek stockholder approval to amend our certificate of incorporation and officially change the name of the Company at our 2010 annual meeting. Following the acquisition of Bluehill ID we also changed our stock trading symbols to reflect our new name. Our common stock is listed on the NASDAQ Global Market in the U.S. under the symbol “INVE” and the regulated market (Prime Standard) of the Frankfurt Stock Exchange in Germany under the symbol “INV.”

The businesses within Identive offer a range of complementary products and include Hirsch Electronics, SCM Microsystems, Multicard, TagStar Systems, Arygon Technologies, Syscan ID and ACiG Technology.

Following our acquisition of Bluehill ID in January 2010, we now operate in two business segments, Identity Management Solutions & Services and Identification Products & Components. Each segment is comprised of two or more business units within the group that focus on specific markets and technologies.

 

   

Business units in our Identity Management Solutions & Services (“ID Management”) segment provide solutions and services that enable the secure management of credentials in diverse markets. These credentials are used for the identification of people and the granting of rights and privileges based on defined security policies. The businesses in our ID Management segment specialize in the design and manufacturing of highly secured and integrated systems that can enhance security and better meet compliance and regulatory requirements while providing users the benefits and convenience of simple and secure solutions. ID Management customers operate in government, commercial and enterprise markets and can be found in multiple vertical market segments including healthcare, finance, industrial, retail and critical infrastructure. The businesses in our ID Management segment include Hirsch Electronics and Multicard.

 

   

Business units in our Identification Products & Components (“ID Products”) segment design and manufacture both standard and highly specialized products and components that help identify people, animals and objects in a multitude of applications and markets. Products and components in our ID Products segment include semiconductors, cards, tags, inlays, readers and terminals that are used by original equipment manufacturers and system integrators to deliver identity based systems and solutions. These products are used for applications such as eHealth, eGovernment, mobile banking, loyalty schemes, transportation and event ticketing, corporate identification, logical access, physical access and passport control in the government, enterprise and financial markets. Within this segment we also offer commercial digital media readers that are used in digital kiosks to transfer digital content to and from various flash media. Businesses in our ID Products segment include SCM Microsystems, TagStar Systems, Arygon Technologies, ACiG Technology and Syscan ID.

Each of the businesses within Identive generally conducts its own sales and marketing activities in the markets in which they compete. In some cases, the business units utilize a direct sales and marketing organization; in others, this is supplemented by a dealer/systems integrator distribution channel, value added resellers, resellers and Internet sales. Each of the businesses within our ID Management segment sells both directly and indirectly through a variety of channels. For example, Hirsch sells primarily through a dealer/systems integrator distribution channel and in some cases directly to government contractors. Multicard sells cards and card services directly to customers that employ them for corporate and government IDs, loyalty programs, fuel cards, access cards, and sport stadium tickets and purchases. Businesses in our ID Products segment primarily sell to original equipment manufacturers (“OEMs”) that typically either bundle our products with their own solutions, or repackage our products for resale to their customers. Our OEM customers typically sell our ID Products solutions to government contractors, systems integrators, large enterprises and computer manufacturers, as well as to banks and other financial institutions. Additionally, we sell our CHIPDRIVE-branded productivity solutions through resellers and the Internet and we sell our digital media readers primarily to major brand computer and photo processing equipment manufacturers.

 

22


Table of Contents

Our corporate headquarters are co-located with our Hirsch business headquarters in Santa Ana, California and our European and operational headquarters are in Ismaning, Germany. We maintain facilities in Chennai, India for research and development and in Australia, Brazil, Canada, Europe, Hong Kong, Japan, the Netherlands, Switzerland and the U.S. for individual business operations and sales. The Company was founded in 1990 in Munich, Germany and incorporated in 1996 under the laws of the state of Delaware. Our stock trades on the NASDAQ Global Market (symbol: INVE) and the Frankfurt Stock Exchange (symbol: INV).

Recent Significant Acquisitions

On January 4, 2010, we acquired Bluehill ID, a Swiss industrial holding group focused on investments in the RFID/identification and security industries, pursuant to the Business Combination Agreement dated as of September 20, 2009, as amended, under which we made an offer to the Bluehill ID shareholders to acquire all of the Bluehill ID shares and issued 0.52 new shares of SCM common stock for every one share of Bluehill ID tendered. A total of 29,422,714, or approximately 92% of Bluehill ID shares outstanding were tendered in the offer and exchanged for a total of 15,299,797 new shares of SCM common stock. The issuance of the shares of SCM common stock to the former shareholders of Bluehill ID was approved by our stockholders at a special meeting held on December 18, 2009. Following the close of the transaction, approximately 38% of the Company’s outstanding shares were held by former Bluehill ID shareholders. Bluehill ID’s operating results have been included in our consolidated results since January 4, 2010, and will continue to be included in our consolidated results going forward.

On April 30, 2009, we acquired Hirsch Electronics Corporation, a privately-held California corporation that designs, engineers, manufactures and markets software, hardware and services in the security management system/physical access control market. The acquisition of Hirsch Electronics Corporation was accomplished through a two-step merger, in accordance with the Agreement and Plan of Merger entered into on December 10, 2008, pursuant to which Hirsch Electronics Corporation became Hirsch Electronics LLC, a Delaware limited liability company and a wholly-owned subsidiary of the Company (“Hirsch”). In exchange for all of the outstanding capital stock of Hirsch, we paid approximately $14.2 million in cash, issued approximately 9.4 million shares of our common stock, and issued warrants to purchase approximately 4.7 million shares of our common stock. The merger was approved by our stockholders at a special meeting held on April 16, 2009. Following the close of the transaction, former Hirsch shareholders beneficially owned approximately 37% of the shares of SCM common stock outstanding. Hirsch’s operating results have been included in our consolidated results since April 30, 2009, and will continue to be included in our consolidated results going forward.

Recent Trends and Strategies for Growth

Identive is focused on building the world’s leading company in access control, identity management and RFID technologies. Our growth strategy is focused both around technology-driven organic growth and disciplined acquisitive activity, acting as a consolidator in a rapidly growing, yet highly fragmented industry. With each acquisition we seek to expand our business, reinforce our market position in targeted areas and fully leverage our strengths and opportunities to enter new markets.

We believe our April 2009 acquisition of Hirsch supported our growth strategy, as it significantly increased our revenues, increased our scale and has helped further diversify our customer base and position our company to better address the growing market demand for solutions that address both IT security and physical access, a trend referred to in the security industry as “convergence.” Following the acquisition, Lawrence W. Midland, a former Hirsch director and current President of Hirsch, joined our Board of Directors and became an Executive Vice President of the Company.

As a result of our January 2010 acquisition of Bluehill ID, we are able to provide identification and authentication solutions for applications ranging from security to asset tracking, to transaction processing for mobile and fixed installations. The acquisition of Bluehill ID further increased our revenue base and our scale to enable us to participate in additional parts of the secure identification market. Following the acquisition, Ayman S. Ashour, Chief Executive Officer of Bluehill ID, joined the Board of Directors of the Company and now serves as our Chairman and Chief Executive Officer. Daniel S. Wenzel, a former director of Bluehill ID, also joined our Board. Additionally, effective March 1, 2010, Felix Marx, our former Chief Executive Officer, was named Chief Operating Officer, responsible for overseeing the developing and execution of the Company’s organic growth strategy. Three other executives from Bluehill ID also joined the management team of the Company following the transaction, including Melvin Denton-Thompson, who serves as our Chief Financial Officer; John S. Rogers, who serves as Executive Vice President Transition Management and Acquisition Integration; and Joseph Tassone, who serves as Executive Vice President Technology and Product Management. The new management from Bluehill ID has extensive expertise in identifying acquisition candidates, executing mergers and acquisitions and successfully integrating acquired businesses.

 

23


Table of Contents

Our goal is to build a lasting business of scale and technology to both enable and capitalize on the growth of the security and RFID industries. As part of our acquisition strategy, we employ a “buy, build and grow” approach worldwide that is designed to rapidly establish Identive as a leading company in the identification and identity management markets. In particular, we pursue majority investments and acquisitions that drive consolidation in the rapidly growing, yet highly fragmented markets for identification-based technologies. At the corporate level, we provide strategic guidance, operational support and market expertise to facilitate sharing of technology and resources across the group and help our individual business units expand and compete more effectively in the global marketplace.

As part of our organic growth strategy, we are focused on the development of a broad range of new contactless infrastructure products to enable fast growing contactless applications and services for markets such as electronic transactions (including payment and ticketing) and various electronic security programs within the government and enterprise sectors. Our contactless readers, modules and tokens are intended to address markets such as national /citizen ID, electronic passports, physical and logical (computer) security and mobile transactions, among others. Additionally, we are developing and implementing programs to market our existing product offerings into new distribution channels and new geographic regions. The worldwide economic downturn has slowed our progress in penetrating new markets; however, we continue to invest in the products, programs and resources to develop new customers so that we will be able to leverage a strong position in the market as the economic situation improves.

Trends in our Business

Sales Trends

The global economic downturn and ongoing economic uncertainty created a broader cautionary environment for us and for our customers over the past several quarters and has resulted in decreased or delayed orders for our products across geographic markets. We believe sales to some markets will continue to be constricted until the global economic environment strengthens, end user demand increases and the lending environment for capital purchases improves.

We believe that our acquisitions of Hirsch and Bluehill ID have strengthened our performance across multiple financial metrics, our ability to address new markets and capture new and existing sales opportunities, and our overall business profile. As a result of the inclusion of Hirsch and Bluehill ID operating results, our sales increased 198% in the first quarter of 2010 compared with the same period of 2009.

Sales to the U.S. government comprise the bulk of our revenues in the Americas region, which also includes Canada and Latin America. In our Hirsch business, sales of integrated physical access control systems and other solutions have continued to grow incrementally in each of the last several quarters, as U.S. federal agencies have continued to implement higher security. In the first quarter of 2010, certain of Hirsch’s U.S. government customers began to accelerate their deployment of security systems mandated under programs such as Homeland Security, and we believe that this higher level of activity will continue. In our SCM Microsystems business, sales of smart card reader products for PC and network access by military and other federal employees were relatively strong in the first quarter of 2010 after several months of product and budget delays by U.S. government customers. For the last two years, the ongoing shift towards lower-cost embedded chips rather than external smart card readers by laptop and keyboard manufacturers servicing the U.S. government sector have constricted our sales of SCM branded products in this market. For some time our SCM business has been investing in sales resources and marketing activities in Latin America and in the first quarter of 2010 SCM received its first large orders from Brazil.

While revenues in Europe have remained stable over the last several quarters, the weak economic environment has continued to constrict demand from some customers and in certain areas of the market. In general, smart-card based security projects in most sectors have continued to experience delays or are limited in scale. One exception to this trend is the transportation program activity recently initiated in the Netherlands, which includes the issuance of readers for payment cards and passes to be deployed in public modes of transportation and taxis. We are supplying readers for these programs through our Multicard business. In our TagStar business, the manufacturing of RFID inlays was hampered due to semiconductor shortages in the early part of the quarter. Also during the quarter, TagStar won new customers in the high volume ticketing, library tracking and e-payment markets. In our SCM business, the country-wide roll-out of electronic health insurance cards in Germany continues to be delayed by the German government and as a result we have continued to recognize only limited revenue from this program. While we believe we are well positioned to become a significant supplier of eHealth readers to this program if it proceeds as originally planned, it is not certain that the German government will support or continue deployments under the program.

 

24


Table of Contents

In the Asia/Pacific region, sales of smart card reader chips continued to be strong and our SCM business recorded its first significant sales in China during the quarter, following several months of sustained focus to form relationships with distribution partners and build sales resources in countries including China, India, Malaysia, the Philippines and Thailand. SCM also had significant sales of its digital media readers for photo kiosks to customers in Japan. Our Multicard business also shipped significant orders both logical and physical access projects in Australia during the quarter.

In our business overall, we may experience significant variations in demand for our products quarter to quarter. This is particularly true for our smart card reader products, a significant portion of which are currently sold for smart card-based ID programs run by various U.S., European and Asian governments. Sales of our smart card readers and chips for government programs are impacted by testing and compliance schedules of government bodies as well as roll-out schedules for application deployments, both of which contribute to variability in demand from quarter to quarter. Further, this business is typically subject to seasonality based on governmental budget cycles, with lowest sales in the first quarter and highest sales in the fourth quarter of each year. Additionally, our dependence on a small number of customers in each of our businesses may in any given period result in additional variability in our revenues.

Operating Expense Trends

Our operating expenses in the first quarter of 2010 reflect the addition of expenses for the acquired Hirsch and Bluehill ID businesses. Immediately following the acquisition of Bluehill ID in early January 2010, we implemented a cost reduction program across all our business units with the goal of significantly lowering expenses and establishing a corporate culture of profit-driven growth. Cost reduction actions completed during the first quarter include consolidation of the SCM and Bluehill ID development centers in Chennai, India into one facility, closure of Bluehill ID’s office in Mainz, Germany, a reduction in force of approximately 15% of the Company’s global workforce, and reductions in executive salaries and director fees. Additionally, our Board of Directors adopted a new incentive plan for our executive team and key employees that ties a higher proportion of management compensation to the financial performance of the Company. We are continuing to look for ways to further reduce our ongoing expenses. We expect these measures will result in cost savings of approximately $6.0 million per year, of which approximately $4.5 million will be realized in 2010. While the cost savings measures were implemented in Q1, the Company expects the main benefits will start to become apparent in the second quarter of 2010.

Over the past several quarters, we have invested in new products and additional sales resources to enhance our ability to address additional areas of the secure identification market. In our SCM business, we have focused our research and development activities on the development of new contactless readers, tokens and modules and on extending our contactless platforms, and this work is ongoing. In our Hirsch business, we have utilized a significant amount of external resources to help develop Hirsch’s next generation of controllers. This development work was substantially completed at the end of 2009 and the remaining internal development costs to finalize these products will continue to decrease through the end of 2010. In our TagStar business, over the past year we have made significant investments in a new production system for our RFID inlays, which are used in a variety of applications including event ticketing, mobile payments and library tracking systems. During the first quarter of 2010 this expansion was completed and as a result TagStar’s production capacity has more than doubled.

During 2009 and 2010, costs associated with our acquisitions of Hirsch and Bluehill ID have comprised a significant component of our general and administrative expenses. Mergers and acquisitions are a central component of our growth strategy; however, we believe that we will be able to execute acquisitions at significantly lower cost going forward as a result of our larger scale and greater experience with the processes involved.

 

25


Table of Contents

Critical Accounting Policies and Estimates

Management’s Discussion and Analysis of Financial Condition and Results of Operations discuss our consolidated financial statements, which have been prepared in accordance with accounting principles generally accepted in the United States of America (U.S. GAAP). The preparation of these financial statements requires management to make estimates and assumptions that affect the reported amounts of assets and liabilities at the date of the financial statements and the reported amounts of revenues and expenses during the reporting period. On an on-going basis, management evaluates its estimates and judgments, including those related to product returns, customer incentives, bad debts, inventories, asset impairment, deferred tax assets, accrued warranty reserves, restructuring costs, contingencies and litigation. Management bases its estimates and judgments on historical experience and on various other factors that are believed to be reasonable under the circumstances, the results of which form the basis for making judgments about the carrying values of assets and liabilities that are not readily apparent from other sources. Actual results may differ from these estimates under different assumptions or conditions.

Management believes the following critical accounting policies, among others, contain our more significant judgments and estimates used in the preparation of our consolidated financial statements.

 

   

We derive revenue from sales of products and services, primarily from sales of hardware products, and to a lesser extent, from the license of proprietary software products and sales of service contracts. We recognize revenue from the sale of hardware products pursuant to ASC Topic 605, Revenue Recognition (“ASC 605”). Accordingly, revenue from product sales is recognized upon product shipment, provided that risk and title have transferred, a purchase order has been received, the sales price is fixed and determinable and collection of the resulting receivable is probable. There are no formal customer acceptance terms or further obligations, outside of Company’s standard product warranty, related to the sale of hardware products. Provisions for estimated warranty repairs and returns and allowances are provided for at the time of sale. Certain sales of the Company’s hardware products are bundled with its software products. In such arrangements, both the software and hardware products are delivered simultaneously. The Company accounts for software in accordance with ASC Topic 985-605, Software Revenue Recognition (“ASC 985-605”) whereby the revenue from the sale of software products is recognized at the time the software is delivered to the customer, provided all the revenue recognition criteria noted above have been met. All proprietary application software sold by the Company is not essential to the functionality of the security hardware. Therefore, in multiple-element arrangements containing hardware and software, the hardware elements are excluded from ASC 985-605 and are accounted for in accordance with ASC 605-25, Multiple Element Arrangements. Revenue from such bundled arrangements is generally recognized upon delivery of the hardware products, assuming all other basic revenue recognition criteria are met, as both the hardware and software products are considered delivered elements and no undelivered elements exist.

Service revenue includes revenue from professional services and maintenance contracts. Typically professional services and maintenance contracts are sold separately from the hardware sales. Professional service revenue, such as, security system integration services, system migration and database conversion services are recognized upon delivery of the services. If the professional service project includes independent milestones, revenue is recognized as milestones are met and upon acceptance from the customer. Maintenance revenue is generated from the sale of hardware maintenance contracts. Maintenance revenue is deferred and amortized ratably over the period of the maintenance contract.

 

   

We typically plan our production and inventory levels based on internal forecasts of customer demand, which are highly unpredictable and can fluctuate substantially. We regularly review inventory quantities on hand and record an estimated provision for excess inventory, technical obsolescence and inability to sell based primarily on our historical sales and expectations for future use. Actual demand and market conditions may be different from those projected by our management. This could have a material effect on our operating results and financial position. If we were to make different judgments or utilize different estimates, the amount and timing of our write-down of inventories could be materially different. Once we have written down inventory below cost, we do not subsequently write it up.

 

   

In accordance with ASC Topic 740, Income Taxes (“ASC 740”), we are required to make certain judgments and estimates in determining income tax expense for financial statement purposes. Significant changes to these estimates may result in an increase or decrease to our tax provision in a subsequent period. The calculation of our tax liabilities requires dealing with uncertainties in the application of complex tax regulations. ASC 740 prescribes a recognition threshold and measurement attribute for the financial statement recognition and measurement of a tax position taken or expected to be taken in a tax return. It is inherently difficult and subjective to estimate such amounts. We reevaluate such uncertain tax positions on a quarterly basis based on factors such as, but not limited to, changes in tax laws, issues settled under audit and changes in facts or circumstances. Such changes in recognition or measurement might result in the recognition of a tax benefit or an additional charge to the tax provision in the period.

 

26


Table of Contents

The carrying value of our net deferred tax assets reflects that we have been unable to generate sufficient taxable income in certain tax jurisdictions. A valuation allowance is provided for deferred tax assets if it is more likely than not these items will either expire before we are able to realize their benefit, or that future deductibility is uncertain. Management evaluates the realizability of the deferred tax assets quarterly. The deferred tax assets are still available for us to use in the future to offset taxable income, which would result in the recognition of a tax benefit and a reduction in our effective tax rate. Actual operating results and the underlying amount and category of income in future years could render our current assumptions, judgments and estimates of the realizability of deferred tax assets inaccurate, which could have a material impact on our financial position or results of operations.

 

   

We evaluate goodwill, at a minimum, on an annual basis and whenever events and changes in circumstances indicate that the carrying amount of an asset may not be recoverable. Goodwill is not subject to amortization but is subject to annual assessment, at a minimum, for impairment in accordance with ASC Topic 350 – Intangibles - Goodwill and Other (“ASC 350”). Impairment of goodwill is tested at the reporting unit level by comparing the reporting unit’s carrying value, including goodwill, to the fair value of the reporting unit. The fair values of the reporting units are estimated using a combination of quoted market prices, the income, or discounted cash flows, approach and the market approach, which utilizes comparable companies’ data. If the carrying value of the reporting unit exceeds the fair value, goodwill is considered impaired and a second step is performed to measure the amount of the impairment loss, if any.

 

   

We evaluate our long-lived assets and certain identifiable intangibles for impairment in accordance with ASC Topic 360, Property, Plant and Equipment (“ASC 360”) whenever events or changes in circumstances indicate that the carrying amount of such assets or intangibles may not be recoverable. Recoverability of assets to be held and used is measured by a comparison of the carrying amount of an asset to future net undiscounted cash flows expected to be generated by an asset. If such assets are considered to be impaired, the impairment to be recognized is measured by the amount by which the carrying amount of the assets exceeds the fair value of the assets. Intangible assets with definite lives are being amortized using the straight-line method over the estimated useful lives of the related assets. For intangible assets, where we have determined that these have an indefinite useful life, no amortization is recognized until its useful life is determined to be no longer indefinite. We evaluate indefinite useful life intangible assets for impairment at a minimum on an annual basis and whenever events and changes in circumstances indicate that the carrying amount of an asset may not be recoverable.

 

   

We recognize stock-based compensation expense for all share-based payment awards in accordance with ASC Topic 718, Compensation – Stock Compensation (“ASC 718”). Stock-based compensation expense for expected-to-vest awards is valued under the single-option approach and amortized on a straight-line basis, net of estimated forfeitures. We utilize the Black-Scholes-Merton option-pricing model in order to determine the fair value of stock-based awards. The Black-Scholes-Merton model requires various highly subjective assumptions including volatility, expected option life, and risk-free interest rate. The assumptions used in calculating the fair value of share-based payment awards represent management’s best estimates. These estimates involve inherent uncertainties and the application of management’s judgment. If factors change and we use different assumptions, our stock-based compensation expense could be materially different in the future. In addition, we are required to estimate the expected forfeiture rate and recognize expense only for those expected-to-vest shares. If our actual forfeiture rate is materially different from our estimate, our recorded stock-based compensation expense could be different.

Recent Accounting Pronouncements

In October 2009, the Financial Accounting Standard Board (“FASB”) issued Accounting Standards Update (“ASU”) No. 2009-14, Software (Topic 985) Certain Arrangements That Contain Software Elements — a consensus of the FASB Emerging Issues Task Force (“EITF”) (“ASU 2009-14”), which amends the scope of software revenue guidance in ASC Subtopic 985-605, Software-Revenue Recognition, to exclude tangible products containing software and non-software components that function together to deliver the product’s essential functionality.

In October 2009, FASB issued ASU No. 2009-13, Revenue Recognition (Topic 605) Multiple-Deliverable Revenue Arrangements — a consensus of the FASB EITF (“ASU 2009-13”), which eliminates the residual method of allocation and requires the relative selling price method when allocating deliverables of a multiple-deliverable revenue arrangement. ASU 2009-13 specifies the best estimate of a selling price is consistent with that used to determine the price to sell the deliverable on a standalone basis.

 

27


Table of Contents

ASU 2009-14 and ASU 2009-13 are effective prospectively for revenue arrangements entered into or materially modified in fiscal years beginning on or after June 15, 2010, and must be adopted in the same period using the same transition method. If adoption is elected in a period other than the beginning of a fiscal year, the amendments in these standards must be applied retrospectively to the beginning of the fiscal year. Full retrospective application of these amendments to prior fiscal years is optional. We are currently assessing the timing of adoption and effects that ASU 2009-14 and ASU 2009-13 will have on our consolidated results of operations and financial condition.

In January 2010, the FASB issued ASU 2010-06 - Topic 820, Improving Disclosures About Fair Value Measurements, that require additional fair value disclosures. ASU 2010-06 requires disclosures about inputs and valuation techniques used to measure fair value as well as disclosures about significant transfers into and out of Levels 1 and 2, beginning in the first quarter of 2010. Additionally, this ASU require presentation of disaggregated activity within the reconciliation for fair value measurements using significant unobservable inputs (Level 3), beginning in the first quarter of 2011. We do not expect that ASU 2010-06 will significantly impact our consolidated financial statements.

Results of Operations

The comparability of our operating results in the three months ended March 31, 2010 with the three months ended March 31, 2009 is primarily impacted by our acquisition of Hirsch on April 30, 2009 and our acquisition of Bluehill ID on January 4, 2010. 2010 figures reflect revenues from the SCM Microsystems, Hirsch and Bluehill ID businesses whereas 2009 figures reflect revenues from the SCM Microsystems business only.

Net Revenue

Summary information by business segment for the three months ended March 31, 2010 and 2009 is shown below:

 

     Three months ended
March 31,
    % change
period to
period
 
(In thousands)    2010     2009        

ID Management:

      

Revenue

   $ 8,103      $ —        —     

Gross profit

     4,084        —       

Gross profit %

     50     —       

ID Products:

      

Revenue

   $ 7,243      $ 5,155      41

Gross profit

     2,121        2,133     

Gross profit %

     29     41  

Total:

      

Revenue

   $ 15,346      $ 5,155      198

Gross profit

     6,205        2,113     

Gross profit %

     40     41  

Net revenue for the first quarter of 2010 was $15.3 million, up 198% compared to $5.2 million for the first quarter of 2009. This increase in revenue primarily was the result of incremental revenues from the acquired Hirsch and Bluehill ID businesses. Hirsch revenues are reflected in our ID Management business segment and Bluehill ID revenues are reflected both in our ID Management and ID Products segments.

Companies in our ID Management business segment provide solutions and services that enable the secure management of credentials in diverse markets. Our ID Management companies include Hirsch and Multicard, which specialize in the design and manufacturing of highly secured and integrated systems that can enhance security and better meet compliance and regulatory requirements while providing users the benefits and convenience of simple and secure solutions. The majority of sales in our ID Management business segment are made to customers in the government, commercial and enterprise markets and encompass vertical market segments including healthcare, finance, industrial, retail and critical infrastructure.

 

28


Table of Contents

Sales in our ID Management segment were $8.1 million in the first quarter of 2010 and consisted of incremental sales from the acquired Hirsch and Multicard (Bluehill ID) businesses. Our Hirsch business, which is the most significant component of our ID Management segment, experienced increased activity in the U.S. government market. Our Multicard business recorded strong sales driven by the initial shipment of orders for large transportation and contactless payment programs in the Netherlands and new customer orders for new logical and physical access projects in Australia.

Companies in our ID Products business segment focus on the design and manufacture of both standard and highly specialized products and components that help identify people, animals and objects in a multitude of applications and markets. Products and components in our ID Products business include semiconductors, cards, tags, inlays, readers and terminals that are used by original equipment manufacturers and system integrators to deliver identity based systems and solutions. Companies in our ID Products business include SCM Microsystems, TagStar Systems, Arygon Technologies, ACiG Technology and Syscan ID.

Sales in our ID Products segment were $7.2 million in the first quarter of 2010, up 41% from sales of $5.2 million in the first quarter of 2009. This increase was primarily due to the inclusion of incremental revenues from the acquired Bluehill ID companies, which include TagStar Systems, Arygon Technologies, ACiG Technology and Syscan ID. Sales in our SCM business, which is the most significant component of our ID Products segment, were up slightly compared with the same period of the previous year. In our SCM business, sales to the U.S. government market were strong, due to favorable timing of projects and distributor activities. SCM also recorded its first significant sales into Latin America and China during the quarter. In our TagStar business, RFID inlay manufacturing was hampered due to semiconductor shortages in the early part of the quarter. This was partly offset by new customer wins in the high volume ticketing, library tracking and e-payment markets.

Gross Profit

Gross profit for the first quarter of 2010 was $6.2 million, or 40% of revenue, compared with $2.1 million, or 41% of revenue in the first quarter of 2009. By segment, gross profit margin for our ID Management segment was 50% in the first quarter of 2010, while gross profit margin for our ID Products segment was 29% for the first quarter of 2010, compared with 41% in the first quarter of 2009. The gross profit margin in our ID Products business in the first quarter of 2010 was negatively impacted by inefficiencies associated with the start up of new RFID inlay product manufacturing line, as well as semiconductor shortages and the mix of products sold during the quarter.

We expect there will be some variation in our gross profit from period to period, as our gross profit has been and will continue to be affected by a variety of factors, including, without limitation, competition, the volume of sales in any given quarter, product configuration and mix, the availability of new products, product enhancements, software and services, inventory write-downs and the cost and availability of components.

Research and Development

 

(In thousands)    Three months ended
March  31,
    % change
period to
period
 
     2010     2009        

Expenses

   $ 2,171      $ 769      182

Percentage of total revenues

     14     15  

Research and development expenses consist primarily of employee compensation and fees for the development of hardware, software and firmware products. We focus the bulk of our research and development activities on the development of products for new and emerging market opportunities. Research and development expenses for 2009 exclude the results of the Hirsch and Bluehill ID businesses.

Research and development expenses in the first quarter of 2010 were $2.2 million, or 14% of revenue, compared with $0.8 million, or 15% of revenue in the first quarter of 2009, an increase of 182%. Higher research and development expenses in the 2010 first quarter compared with the same period of 2009 were primarily due to the inclusion of additional expenses related to the Hirsch and Bluehill ID businesses, offset by the reduction in external costs related to development of a next generation of controllers in our Hirsch business, as the external phase of this development project was completed at the end of 2009, the consolidation of the Company’s two development facilities in India into one development center; as well as headcount reductions associated with this consolidation.

 

29


Table of Contents

We expect our research and development expenses to vary based on future project demands and the markets we target.

Selling and Marketing

 

(In thousands)    Three months ended
March  31,
    % change
period to
period
 
     2010     2009        

Expenses

   $ 6,097      $ 2,244      172

Percentage of total revenues

     40     44  

Selling and marketing expenses consist primarily of employee compensation as well as tradeshow participation, advertising and other marketing and selling costs. We focus a significant proportion of our sales and marketing activities on new and emerging market opportunities. Sales and marketing expenses for 2009 exclude the results of the Hirsch and Bluehill ID businesses.

Selling and marketing expenses were $6.1 million in the first quarter of 2010, or 40% of revenue, up 172% from $2.2 million in the first quarter of 2009, which represented 44% of revenue. Higher sales and marketing expenses in the 2010 first quarter compared with the same period of 2009 were primarily due to the inclusion of additional expenses related to the Hirsch and Bluehill ID businesses, offset by reductions in tradeshow and marketing program expenses.

General and Administrative

 

(In thousands)    Three months ended
March  31,
    % change
period to

period
 
     2010     2009        

Expenses

   $ 3,162      $ 2,487      27

Percentage of total revenues

     21     48  

General and administrative expenses consist primarily of compensation expenses for employees performing administrative functions, and professional fees arising from legal, auditing and other consulting services. General and administrative expenses for 2009 exclude the results of the Hirsch and Bluehill ID businesses.

In the first quarter of 2010, general and administrative expenses were $3.2 million, or 21% of revenue, compared with $2.5 million, or 48% of revenue in the first quarter of 2009, an increase of 27%. General and administrative expenses in the first quarter of 2010 reflect the inclusion of additional expenses related to the Hirsch and Bluehill ID businesses, offset by initial cost reductions related to salary reductions for executive officers, fee reductions for directors and headcount reductions, all of which were implemented in the first quarter of 2010. Also included in the first quarter of 2010 were approximately $0.3 million of transactions expenses related to our acquisitions of Bluehill ID and RockWest. General and administrative expenses in the first quarter of 2009 included approximately $1.4 million of transaction expenses related to our merger with Hirsch and $0.1 million in severance expenses.

Non-GAAP measures

We use certain non-GAAP measures as a way to assess our operating performance. Non-GAAP gross profit margin, which excludes amortization and depreciation, stock-based compensation and the effect of overhead allocation, was 49% in the first quarter of 2010, unchanged from 49% in the first quarter of 2009. Overhead costs, which include overhead allocation (that were excluded from non-GAAP gross margin) and exclude amortization and depreciation, stock-based compensation, acquisition costs, transition and integration costs and gain on sale of assets were $10.0 million in the first quarter of fiscal 2010 and $4.4 million in the first quarter of 2009. Adjusted earnings before interest, taxes, depreciation and amortization (“EBITDA”), which excludes income taxes, net interest expense (income), net foreign currency losses (gains), amortization and depreciation, stock-based compensation, loss on equity investments, acquisition costs and transition and integration costs, was a loss of $(2.5) million in the first quarter of fiscal 2010, compared with adjusted EBITDA loss of $(1.9) million in the first quarter of fiscal 2009. We believe non-GAAP gross profit margin, overhead costs and adjusted EBITDA provide a meaningful way to evaluate our operating performance, but caution investors to consider these measures in addition to, not as a substitute for, nor superior to, our condensed consolidated operating results as presented in the condensed consolidated statements of operations in accordance with U.S. GAAP.

 

30


Table of Contents

A reconciliation of non-GAAP measures to our reported GAAP results is presented below (in thousands, except percentages):

 

     Three months ended  
     March 31,
2010
    March 31,
2009
 

Reconciliation of GAAP gross profit margin and non-GAAP gross profit margin

    

GAAP cost of revenue

   $ 9,141      $ 3,042   

Reconciling items included in GAAP cost of revenue:

    

Overhead allocation

     (949     (417

Stock-based compensation

     (6     (6

Amortization and depreciation

     (416     (13
                

Total reconciling items included in GAAP cost of revenue

     (1,371     (436
                

Non-GAAP cost of revenue

   $ 7,770      $ 2,606   
                

Non-GAAP gross profit margin

     49     49
                

Reconciliation of GAAP operating expenses and overhead costs

    

GAAP operating expenses

   $ 11,694      $ 5,251   

Reconciling items included in GAAP operating expenses:

    

Overhead allocation

     949        417   

Stock-based compensation

     (141     (55

Amortization and depreciation

     (717     (83

Acquisition costs

     (308     (1,355

Transition and integration costs

     (1,442     —     

Gain on sale of assets

     —          249   
                

Total reconciling items included in GAAP operating expenses

     (1,659     (827
                

Overhead costs

   $ 10,035      $ 4,424   
                

Reconciliation of GAAP net loss to adjusted EBITDA loss

    

Loss from continuing operations before income taxes and noncontrolling interest

   $ (6,034   $ (3,148

Reconciling items included in GAAP net loss:

    

Interest expense (income), net

     231        (27

Foreign currency losses (gains), net

     314        (252

Stock-based compensation

     147        61   

Amortization and depreciation

     1,133        96   

Acquisition costs

     308        1,355   

Transition and integration costs

     1,442        —     

Gain on sale of assets

     —          (249

Loss on equity investments

     —          289   
                

Total reconciling items included in GAAP net loss

     3,575        1,273   
                

Adjusted EBITDA loss

   $ (2,459   $ (1,875
                

Loss on Equity Investments

Net loss on equity investments of $0.3 million in the first quarter 2009 relates to our share of the net losses of our equity method investment in TranZfinity and amortization of the differences between SCM’s cost and underlying equity in net assets of TranZfinity, subsequent to the date of investment. Our investment in TranZfinity was determined to be impaired and written off in the fourth quarter of 2009.

 

31


Table of Contents

Interest (Expense) Income, Net

In the first quarter of 2010, interest expense, net of $0.2 million consists of interest accretion expense for a liability to related party in the Hirsch business, offset by interest earned on invested cash, compared with interest income, net, of $27,000 in the first quarter of 2009.

Foreign Currency Gains (Losses), Net

We recorded foreign currency losses of $0.3 million in the first quarter of 2010, compared with foreign currency gains of $0.3 million in the first quarter of 2009. Changes in currency valuation in all periods presented were primarily a result of exchange rate movements between the U.S. dollar and the Euro.

Our foreign currency losses primarily result from the valuation of current assets and liabilities denominated in a currency other than the functional currency of the respective entity in the local financial statements. Accordingly, these foreign currency losses are predominantly non-cash items.

Income Taxes

We recorded a provision for income taxes of $0.2 million in the first quarter of 2010 and a benefit for income taxes of $1,000 in the first quarter of 2009.

Liquidity and Capital Resources

As of March 31, 2010, our working capital, which we have defined as current assets less current liabilities, was $2.5 million, compared to $4.1 million as of December 31, 2009, a decrease of approximately $1.6 million. The reduction in working capital for the first three months of 2010 reflects a $3.3 increase in accounts payable, a $4.8 million increase in accrued liabilities and the addition of a $0.3 million mortgage loan and line of credit payable to the bank, offset by a $1.9 million increase in cash, cash equivalents and a $4.9 million increase in accounts receivable, inventories and other current assets.

Cash, cash equivalents were $6.8 million as of March 31, 2010, an increase of approximately $1.9 million compared to $4.8 million as of December 31, 2009 as a result of the addition of cash and cash equivalents from the acquired Bluehill ID business.

The following summarizes our cash flows for the three months ended March 31, 2010 (in thousands):

 

     Three Months Ended
March  31, 2010
 

Cash used in operating activities from continuing operations

   $ (4,353

Cash provided by operating activities from discontinued operations

     58   

Cash provided by investing activities

     4,953   

Cash provided by financing activities

     1,526   

Effect of exchange rate changes on cash and cash equivalents

     (267
        

Increase in cash and cash equivalents

     1,917   

Cash and cash equivalents at beginning of period

     4,836   
        

Cash and cash equivalents at end of period

   $ 6,753   
        

Significant commitments that will require the use of cash in future periods include obligations under operating leases, inventory purchase commitments and other contractual agreements. Gross committed lease obligations were approximately $4.5 million at March 31, 2010. Purchase and other contractual commitments due within one year were approximately $10.0 million, and additional purchase and contractual commitments due thereafter were approximately $3.8 million at March 31, 2010.

 

32


Table of Contents

We currently expect that our current capital resources and available borrowings should be sufficient to meet our operating and capital requirements through at least the end of 2010. We may, however, seek additional debt or equity financing prior to that time. There can be no assurance that additional capital will be available to us on favorable terms or at all. The sale of additional debt or equity securities may cause dilution to existing stockholders.

 

Item 3. Quantitative and Qualitative Disclosures About Market Risk

There has been no significant change in our exposure to market risk during the first three months of 2010. For discussion of the Company’s exposure to market risk, refer to Item 7A, Quantitative and Qualitative Disclosures About Market Risk, contained in our Annual Report on Form 10-K for the year ended December 31, 2009.

 

Item 4. Controls and Procedures

(a) Evaluation of Disclosure Controls and Procedures

Attached, as exhibits to this report are certifications of our principal executive officer and principal financial officer, which are required in accordance with Rule 13a-14 of the Securities Exchange Act of 1934, as amended (the “Exchange Act”). This “Controls and Procedures” section includes information concerning the controls and related evaluations referred to in the certifications and it should be read in conjunction with the certifications for a more complete understanding of the topics presented.

As of the end of the fiscal quarter ended March 31, 2010, the Company carried out an evaluation, as required in Rule 13a-15(b) under the Exchange Act, under the supervision and with the participation of members of our senior management, including our principal executive officer and principal financial officer, of the effectiveness of the design and operation of our disclosure controls and procedures, as defined in Rule 13a-15(e) under the Exchange Act.

We note that our current principal executive officer was appointed on March 1, 2010 and our current principal financial officer was appointed on January 19, 2010 and that they are still in the process of reviewing for themselves our disclosure controls and procedures. Notwithstanding the foregoing, based on this evaluation, our principal executive officer and principal financial officer concluded that, as of March 31, 2010, our disclosure controls and procedures were effective to provide reasonable assurance that the information required to be disclosed by us in reports that we file or submit under the Exchange Act (i) is recorded, processed, summarized and reported within the time periods specified in Securities and Exchange Commission rules and forms, and (ii) is accumulated and communicated to our management, including our principal executive officer and principal financial officer, as appropriate to allow timely decisions regarding required disclosure.

(b) Changes in Internal Controls over Financial Reporting

In the first quarter of 2010, we implemented a new enterprise resource planning (“ERP”) system. In connection with our continued monitoring and maintenance of our controls procedures as part of the implementation of section 404 of the Sarbanes-Oxley Act of 2002, we continue to review, revise and improve the effectiveness of our internal controls. We made no changes to our internal control over financial reporting, as defined in Rules 13a-15(e) and 15(d)-15(e) under the Securities Exchange Act of 1934, as amended, during the first quarter of 2010 that have materially affected, or that are reasonably likely to materially affect, our internal control over financial reporting.

A control system, no matter how well designed and operated, can only provide reasonable assurances that the objectives of the control system are met. Because there are inherent limitations in all control systems, no evaluation of controls can provide absolute assurance that all control issues and instances of fraud, if any, within the Company have been or will be detected.

PART II: OTHER INFORMATION

 

Item 1. Legal Proceedings

From time to time, we could be subject to claims arising in the ordinary course of business or be a defendant in lawsuits. While the outcome of such claims or other proceedings cannot be predicted with certainty, our management expects that any such liabilities, to the extent not provided for by insurance or otherwise, will not have a material adverse effect on our financial condition, results of operations or cash flows.

 

33


Table of Contents
Item 1A. Risk Factors

Our business and results of operations are subject to numerous risks, uncertainties and other factors that you should be aware of, some of which are described below. The risks, uncertainties and other factors described in the following risk factors described below are not the only ones facing our company. Additional risks, uncertainties and other factors not presently known to us or that we currently deem immaterial may also impair our business operations. Any of the risks, uncertainties and other factors could have a materially adverse effect on our business, financial condition, results of operations, cash flows or product market share and could cause the trading price of our common stock to decline substantially.

Risks of Market Dynamics

Disruption in the global financial markets may adversely impact the availability and cost of credit.

We may seek or need to raise additional funds. Our ability to obtain financing for general corporate and commercial purposes or acquisitions depends on our operating and financial performance, and is also subject to prevailing economic conditions and to financial, business and other factors beyond our control. The global credit markets and the financial services industry have been experiencing a period of unprecedented turmoil characterized by the bankruptcy, failure or sale of various financial institutions. An unprecedented level of intervention from the U.S. and other governments has been seen. As a result of such disruption, our ability to raise capital may be severely restricted and the cost of raising capital through such markets or privately may increase significantly at a time when we would like, or need, to do so. Either of these events could have an impact on our flexibility to fund our business operations, make capital expenditures, pursue additional expansion or acquisition opportunities, or make another discretionary use of cash and could adversely impact our financial results. In any case, there can be no assurance that such funds, if available at all, can be obtained on terms reasonable to us.

We are exposed to credit risk on our accounts receivables. This risk is heightened in times of economic weakness.

We are exposed to credit risk in our accounts receivable, and this risk is heightened in times of economic weakness. We distribute our products both through third-party resellers and directly to certain customers and a majority of our outstanding trade receivables are not covered by collateral or credit insurance. We may not be able to monitor and limit our exposure to credit risk on our trade and non-trade receivables, we may not be effective in limiting credit risk and avoiding losses.

Continuing disruption in the global financial markets may adversely impact customers and customer spending patterns.

Continuing disruption in the global financial markets as a result of the ongoing global financial uncertainty may cause consumers, businesses and governments to defer purchases in response to tighter credit, decreased cash availability and declining consumer confidence. Accordingly, demand for our products could decrease and differ materially from their current expectations. For example, as part of our focus on the commercial and industrial markets, a portion of our business is subject to conditions in the commercial construction and renovation sector. A decline in new commercial construction or a significant decline in renovation projects due to the global economic downturn could have a material adverse effect on the results of operations of this business. Further, some of our customers may require substantial financing in order to fund their operations and make purchases from us. The inability of these customers to obtain sufficient credit to finance purchases of our products and meet their payment obligations to us, or possible insolvencies of our customers, could result in decreased customer demand, an impaired ability for us to collect on outstanding accounts receivable, significant delays in accounts receivable payments, and significant write-offs of accounts receivable, each of which could adversely impact our financial results.

Disruption in the global financial markets may adversely impact our suppliers.

Our ability to meet customers’ demands depends, in part, on our ability to obtain timely and adequate delivery of quality materials, parts and components or products from our suppliers. Certain of our components are available only from a single source or limited sources. If certain key suppliers were to become capacity constrained or insolvent as a result of economic weakness either regionally or globally, it could result in a reduction or interruption in supplies or a significant increase in the price of supplies, each of which would adversely impact our financial results. In addition, credit constraints at key suppliers could result in accelerated payment of accounts payable by us, impacting our cash flow.

 

34


Table of Contents

Our markets are highly competitive.

The markets for our products are competitive and characterized by rapidly changing technology. We believe that the principal competitive factors affecting the markets for our products include:

 

   

the extent to which products must support existing industry standards and provide interoperability;

 

   

the extent to which standards are widely adopted and product interoperability is required within industry segments;

 

   

the extent to which products are differentiated based on technical features, quality and reliability, ease of use, strength of distribution channels and price; and

 

   

the ability of suppliers to develop new products quickly to satisfy new market and customer requirements.

We currently experience competition from a number of companies in each of our target market segments and we believe that competition in our markets is likely to intensify as a result of anticipated increased demand for secure digital access products. We may not be successful in competing against offerings from other companies and could lose business as a result.

We also experience indirect competition from certain of our customers who currently offer alternative products or are expected to introduce competitive products in the future. For example, we sell our products to many OEMs who incorporate our products into their offerings or who resell our products in order to provide a more complete solution to their customers. If our OEM customers develop their own products to replace ours, this would result in a loss of sales to those customers, as well as increased competition for our products in the marketplace. In addition, these OEM customers could cancel outstanding orders for our products, which could cause us to write down inventory already designated for those customers. We may, in the future, face competition from these and other parties that develop digital data security products based upon approaches similar to or different from those employed by us. In addition, the market for digital information security and access control products may ultimately be dominated by approaches other than the approach marketed by us.

Many of our current and potential competitors have significantly greater financial, technical, marketing, purchasing and other resources than we do. As a result, our competitors may be able to respond more quickly to new or emerging technologies or standards and to changes in customer requirements. Our competitors may also be able to devote greater resources to the development, promotion and sale of products and may be able to deliver competitive products at a lower end user price. Current and potential competitors have established or may establish cooperative relationships among themselves or with third parties to increase the ability of their products to address the needs of our prospective customers. Therefore, new competitors, or alliances among competitors, may emerge and rapidly acquire significant market share. Increased competition is likely to result in price reductions, reduced operating margins and loss of market share.

Strategic Risks

Our future success will depend on our ability to keep pace with technological change and meet the needs of our target markets and customers.

The markets for our products are characterized by rapidly changing technology and the need to meet market requirements and to differentiate our products through technological enhancements, and in some cases, price. Our customers’ needs change, new technologies are introduced into the market, and industry standards are still evolving. As a result, product life cycles are often short and difficult to predict, and frequently we must develop new products quickly in order to remain competitive in light of new market requirements. Rapid changes in technology, or the adoption of new industry standards, could render our existing products obsolete and unmarketable. Changes in market requirements could render our existing solutions obsolete or could require us to expend more on research and development efforts. For example, a significant portion of our revenues results from the sale of access control panels that include certain design elements that are more than a decade old. These controllers are typically used in a network architecture that may become outdated or obsolete. If a product is deemed to be obsolete or unmarketable, then we might have to reduce revenue expectations or write down inventories for that product. We may also lose market share.

Our future success will depend upon our ability to enhance our current products and to develop and introduce new products with clearly differentiated benefits that address the increasingly sophisticated needs of our customers and that keep pace with technological developments, new competitive product offerings and emerging industry standards. We must be able to demonstrate that our products have features or functions that are clearly differentiated from existing or anticipated competitive offerings, or we may be unsuccessful in selling these products. Our failure to develop, manufacture, launch and sell next-generation security

 

35


Table of Contents

products and architectures for both physical and logical security could significantly affect our financial performance. In addition, in cases where we are selected to supply products based on features or capabilities that are still under development, we must be able to complete our product design and delivery process on a timely basis, or risk losing current and any future revenue from those products. In developing our products, we must collaborate closely with our customers, suppliers and other strategic partners to ensure that critical development, marketing and distribution projects proceed in a coordinated manner. Also, this collaboration is important because these relationships increase our exposure to information necessary to anticipate trends and plan product development. If any of our current relationships terminate or otherwise deteriorate, or if we are unable to enter into future alliances that provide us with comparable insight into market trends, our product development and marketing efforts may be adversely affected, and we could lose sales. We expect that our product development efforts will continue to require substantial investments and we may not have sufficient resources to make the necessary investments.

In some cases, we depend upon partners who provide one or more components of the overall solution for a customer in conjunction with our products. If our partners do not adapt their products and technologies to new market or distribution requirements, or if their products do not work well, then we may not be able to sell our products into certain markets.

Because we operate in markets for which industry-wide standards have not yet been fully set, it is possible that any standards eventually adopted could prove disadvantageous to or incompatible with our business model and product lines. If any of the standards supported by us do not achieve or sustain market acceptance, our business and operating results would be materially and adversely affected.

Sales of our products depend on the development of emerging applications in our target markets and on diversifying and expanding our customer base in new markets and geographic regions, and with new products.

We sell our products primarily to address emerging applications that have not yet reached a stage of mass adoption or deployment. For example, we sell our smart card readers for use in various smart card-based security programs in Europe, such as electronic driver’s licenses, national IDs and e-passports, which are applications that are not yet widely implemented. In our Bluehill ID business, our solutions are used in various smart card-based identification programs in Europe, such as transit, payments, ticketing, national and regional IDs and stadiums, which are applications that are not yet widely implemented.

We are also focused on expanding sales of professional services, identity management and RFID products and solutions. The market for some of these solutions is at an early stage of development compared to the market for traditional access control. Additionally, we have a strategy of expanding sales of existing product lines into new geographic markets and diversifying and expanding our customer base, including authentication programs in the government and enterprise sectors in Asia and the photo kiosk markets in Europe and Asia.

Because the markets for our products are still emerging, demand for our products is subject to variability from period to period. There is no assurance that demand will become more predictable as additional smart card programs demonstrate success. If demand for products to enable smart card-based security applications does not develop further and grow sufficiently, our revenue and gross profit margins could decline or fail to grow. We cannot predict the future growth rate, if any, or size or composition of the market for any of our products. Our target markets have not consistently grown or developed as quickly as we have expected, and we have experienced delays in the development of new products designed to take advantage of new market opportunities. Since new target markets are still evolving, it is difficult to assess the competitive environment or the size of the market that may develop. The demand and market acceptance for our products, as is common for new technologies, is subject to high levels of uncertainty and risk and may be influenced by various factors, including, but not limited to, the following:

 

   

general economic conditions, for example the economic uncertainty;

 

   

our ability to demonstrate to our potential customers and partners the value and benefits of new products;

 

   

the ability of our competitors to develop and market competitive solutions for emerging applications in our target markets and our ability to win business in advance of and against such competition;

 

   

the adoption and/or continuation of industry or government regulations or policies requiring the use of products such as our smart card readers or identity management solutions;

 

   

the timing of large scale security programs involving smart cards and related technology by governments, banks and enterprises;

 

36


Table of Contents
   

the ability of financial institutions, corporate enterprises, the U.S. government and other governments to agree on industry specifications and to develop and deploy smart card-based applications that will drive demand for smart card readers and systems such as ours; and

 

   

the ability of high capacity flash memory cards to drive demand for digital media readers, such as ours, that enable rapid transfer of large amounts of data, for example digital photographs.

We face risks associated with strategic transactions.

A significant component of our ongoing business strategy is to seek to buy businesses, products and technologies that complement or augment our existing businesses, products and technologies. We have in the past acquired or made, and from time to time in the future may acquire or make, investments in companies, products and technologies that we believe are complementary to our existing businesses, products and technologies.

For example, on October 1, 2008, we entered into a Stock Purchase Agreement with TranZfinity, Inc., a privately held entity, pursuant to which we purchased 33.7% of the outstanding shares of TranZfinity common stock for an aggregate purchase price of $2.5 million. During the fourth quarter of 2009, we determined that the value of our investment in TranZfinity was impaired and we recorded a charge for the impairment to write-off 100% of our investment and our proportionate losses realized by TranZfinity of $2.2 million.

On January 4, 2010, we acquired Bluehill ID AG, a Swiss stock corporation focused on investments in the security and RFID markets and on April 14, 2010 we acquired RockWest Technology Group, a privately held provider of identification and security solutions. Integrating the Bluehill ID and RockWest businesses into our business exposes us to certain risks. The combination of companies is a complex, costly and time-consuming process. As a result, we must devote significant management attention and resources to integrating the diverse business practices and operations of the acquired companies. The integration process may divert the attention of our executive officers and management from day-to-day operations and disrupt our businesses and, if implemented ineffectively, preclude realization of the full benefits expected from the transactions. Failure to meet the challenges involved in successfully integrating another company’s operations with ours or otherwise to realize any of the anticipated benefits of an acquisition could cause an interruption of, or a loss of momentum in, the activities of our combined company and could adversely affect our results of operations. In addition, the integration of acquired companies may result in unanticipated problems, expenses, liabilities, competitive responses and loss of customer relationships, and may cause our stock price to decline.

Any future acquisition could expose us to significant risks, including, without limitation, the use of our limited cash balance or potentially dilutive stock offerings to fund such acquisitions; costs of any necessary financing, which may not be available on reasonable terms or at all; accounting charges we might incur in connection with such acquisitions; the difficulty and expense of integrating personnel, technologies, customer, supplier and distributor relationships, marketing efforts and facilities acquired through acquisitions; integrating internal controls over financial reporting; discovering and correcting deficiencies in internal controls and other regulatory compliance, data adequacy and integrity, product quality and product liabilities; diversion of management resources; failure to realize anticipated benefits; costly fees for legal and transaction-related services; and the unanticipated assumption of liabilities. Any of the foregoing could have a material adverse effect on our financial condition and results of operations. We may not be successful with any such acquisition.

Acquisitions and strategic investments may also lead to substantial increases in non-current assets, including goodwill. Write-downs of these assets due to unforeseen business developments may materially and adversely impact our financial condition and results of operations.

Our business strategy also contemplates divesting portions of our business from time to time, if and when we believe we would be able to realize greater value for our stockholders in so doing. We have in the past sold, and may from time to time in the future sell, all or one or more portions of our business. Any divestiture or disposition could expose us to significant risks, including, without limitation, costly fees for legal and transaction-related services; diversion of management resources; loss of key personnel; and reduction in revenue. Further, we may be required to retain or indemnify the buyer against certain liabilities and obligations in connection with any such divestiture or disposition and we may also become subject to third-party claims arising out of such divestiture or disposition. In addition, we may not achieve the expected price in a divestiture transaction. Failure to overcome these risks could have a material adverse effect on our financial condition and results of operations.

 

37


Table of Contents

Operational Risks

We have incurred and will incur significant expenses as a result of our acquisition strategy, which has reduced and will reduce the amount of capital available to fund our business.

We have incurred, and will continue to incur, significant expenses related to our acquisition strategy, including our acquisition of Hirsch in April 2009, our business combination with Bluehill ID in January 2010, our acquisition of RockWest in April 2010 and possible future acquisitions. These expenses include investment banking fees, legal fees, accounting fees, printing and mailing of stockholder materials, integration and other costs, as well as past and possible future outlays of cash. There may also be unanticipated costs related to our acquisition on an ongoing basis. As a result, the capital available to fund our activities has been and is expected to be further reduced. If we are unsuccessful in securing sufficient sales from established markets or in generating sufficient new revenues from emerging markets, then we would likely continue to require cash to fund our operations. The remaining cash available to us might not be adequate in subsequent years.

We currently expect that our current capital resources should be sufficient to meet our operating and capital requirements at least through the end of 2010. We may, however, seek additional debt or equity financing prior to that time. There can be no assurance that additional capital will be available to us on favorable terms or at all. The sale of additional debt or equity securities may cause dilution to existing stockholders.

We have incurred operating losses and may not achieve profitability.

We have a history of losses. In the future, we may not be able to achieve expected results, including any guidance or outlook we may provide from time to time; we may continue to incur losses and we may be unable to achieve or maintain profitability.

Our quarterly and annual operating results fluctuate.

Our quarterly and annual operating results have varied greatly in the past and will likely vary greatly in the future depending upon a number of factors. Many of these factors are beyond our control. Our revenues, gross profit and operating results may fluctuate significantly from quarter to quarter due to, among other things:

 

   

business and economic conditions overall and in our markets;

 

   

the timing and amount of orders we receive from our customers that may be tied to budgetary cycles, seasonal demand, product plans or program roll-out schedules;

 

   

cancellations or delays of customer product orders or the loss of a significant customer;

 

   

our ability to obtain an adequate supply of components on a timely basis;

 

   

poor quality in the supply of our components;

 

   

delays in the manufacture of our products;

 

   

the absence of significant backlog in our business;

 

   

our inventory levels;

 

   

our customer and distributor inventory levels and product returns;

 

   

competition;

 

   

new product announcements or introductions;

 

   

our ability to develop, introduce and market new products and product enhancements on a timely basis, if at all;

 

   

our ability to successfully market and sell products into new geographic or market segments;

 

   

the sales volume, product configuration and mix of products that we sell;

 

   

technological changes in the markets for our products;

 

   

the rate of adoption of industry-wide standards;

 

   

reductions in the average selling prices that we are able to charge due to competition or other factors;

 

   

strategic acquisitions, sales and dispositions;

 

38


Table of Contents
   

fluctuations in the value of foreign currencies against the U.S. dollar;

 

   

the timing and amount of marketing and research and development expenditures;

 

   

loss of key personnel; and

 

   

costs related to events such as dispositions, organizational restructuring, headcount reductions, litigation or write-off of investments or goodwill.

Due to these and other factors, our revenues may not increase or even remain at their current levels. Because a majority of our operating expenses are fixed, a small variation in our revenues can cause significant variations in our operational results from quarter to quarter and our operating results may vary significantly in future periods. Therefore, our historical results may not be a reliable indicator of our future performance.

It is difficult to estimate operating results prior to the end of a quarter.

In our ID Management business, sales tend to be relatively linear (regularly spaced throughout the quarter), as they are tied to projects with relatively predictable timelines. In our ID Products business, the main component of sales in any given quarter is sales is smart card reader technology. Historically, many of our smart card reader customers have tended to make a significant portion of their purchases towards the end of the quarter, in part because they believe they are able to negotiate lower prices and more favorable terms. As a result, smart card reader revenue in any quarter depends on contracts entered into or orders booked and shipped in that quarter. This makes it difficult to predict revenues both in our smart card reader business, and for the company overall. The timing of closing larger orders increases the risk of quarter-to-quarter fluctuation in revenues. If orders forecasted for a specific group of customers for a particular quarter are not realized or revenues are not otherwise recognized in that quarter, our operating results for that quarter could be materially adversely affected. In addition, from time to time, we may experience unexpected increases or decreases in demand for our products resulting from fluctuations in our customers’ budgets, purchasing patterns or deployment schedules. These occurrences are not always predictable and can have a significant impact on our results in the period in which they occur.

If we do not accurately anticipate the correct mix of products that will be sold, we may be required to record charges related to excess inventories.

Due to the unpredictable nature of the demand for our products, we are required to place orders with our suppliers for components, finished products and services in advance of actual customer commitments to purchase these products. Significant unanticipated fluctuations in demand could result in costly excess production or inventories. In order to minimize the negative financial impact of excess production, we may be required to significantly reduce the sales price of the product to increase demand, which in turn could result in a reduction in the value of the original inventory purchase. If we were to determine that we could not utilize or sell this inventory, we may be required to write down its value, which we have done in the past. Writing down inventory or reducing product prices could adversely impact our cost of revenues and financial condition.

We may choose to take back unsold inventory from our customers.

If demand is less than anticipated, customers may ask that we accept returned products that they do not believe they can sell. We do not have a policy relating to product returns for the majority of our products. However, we may determine that it is in our best interest to accept returns in order to maintain good relations with our customers. If we were to accept product returns, we may be required to take additional inventory reserves to reflect the decreased market value of slow-selling returned inventory, even if the products are in good working order.

We are subject to a lengthy sales cycle and additional delays could result in significant fluctuations in our quarterly operating results.

In many of our product areas, our initial sales cycle for a new customer usually takes a minimum of six to nine months, and even in the case of established customers, it may take up to a year for us to receive approval for a given purchase from the customer. During this sales cycle, we may expend substantial financial and managerial resources with no assurance that a sale will ultimately result. The length of a new customer’s sales cycle depends on a number of factors, many of which we may not be able to control. These factors include the customer’s product and technical requirements and the level of competition SCM faces for that customer’s business. Any delays in the sales cycle for new customers could delay or reduce our receipt of new revenue and could cause us to expend more resources to obtain new customer wins. If we are unsuccessful in managing sales cycles, our business could be adversely affected.

 

39


Table of Contents

A significant portion of our sales typically comes from a small number of customers and the loss of one or more of these customers or variability in the timing of orders could negatively impact our operating results.

Sales to a relatively small number of customers historically have accounted for a significant percentage of our revenues. We expect that sales of our component products to a relatively small number of customers will continue to account for a significant percentage of our total sales for the foreseeable future, although we believe the addition of Bluehill ID companies and customers will improve the diversity of our customer base and reduce our reliance on a small number of customers In our SCM Microsystems Digital Media and Connectivity business, approximately two-thirds of the sales have typically been generated by two or three customers. The loss of a customer or reduction of orders from a significant customer, including those due to product performance issues, changes in customer buying patterns, or market, economic or competitive conditions in our market segments, could significantly lower our revenues in any period and would increase our dependence on a smaller group of our remaining customers. For example, in the first and fourth quarters of 2009, sales of our digital media readers were significantly lower than in previous quarters due to reduced orders from one major customer in this business. Variations in the timing or patterns of customer orders could also increase our dependence on other customers in any particular period. Dependence on a small number of customers and variations in order levels period to period could result in decreased revenues, decreased margins, and/or inventory or receivables write-offs and otherwise harm our business and operating results.

Our business could be adversely affected by significant changes in the contracting or fiscal policies of governments and governmental entities.

We derive a substantial portion of our revenues from contracts with international, federal, state and local governments and government agencies, and subcontracts under federal government prime contracts. We believe that the success and growth of our business will continue to be influenced by our successful procurement of government contracts either directly or through prime contractors. Accordingly, changes in government contracting policies or government budgetary constraints could directly affect its financial performance.

Among the factors that could adversely affect our government-related business are:

 

   

changes in fiscal policies or decreases in available government funding or grants;

 

   

changes in government programs or applicable requirements;

 

   

the adoption of new laws or regulations or changes to existing laws or regulations;

 

   

changes in political or social attitudes with respect to security and defense issues;

 

   

potential delays or changes in the government appropriations process; and

 

   

delays in the payment of its invoices by government payment offices.

These and other factors could cause governments and governmental agencies, or prime contractors that purchase our products or services, to reduce their purchases under existing contracts, to exercise their rights to terminate contracts at-will or to abstain from exercising options to renew contracts, any of which could have an adverse effect on our business, financial condition and results of operations. Many of our government customers are subject to stringent budgetary constraints. The award of additional contracts from government agencies could be adversely affected by existing or upcoming spending reduction efforts or budget cutbacks at these agencies.

Fluctuations in the valuation of foreign currencies could impact costs and/or revenues we disclose in U.S. dollars, and could result in foreign currency losses.

A significant portion of our business is conducted in foreign currencies, principally the euro. The portion of our business conducted in foreign currencies has increased since the Bluehill ID business combination as Bluehill ID conducts more than 95% of its business outside the U.S. Fluctuations in the value of foreign currencies relative to the U.S. dollar will continue to cause currency exchange gains and losses. If a significant portion of operating expenses are incurred in a foreign currency such as the euro, and revenues are generated in U.S. dollars, exchange rate fluctuations might have a positive or negative net financial impact on these transactions, depending on whether the U.S. dollar devalues or revalues compared to the euro. In addition, the valuation of current assets and liabilities that are denominated in a currency other than the functional currency can result in currency

 

40


Table of Contents

exchange gains and losses. For example, when one of our subsidiaries uses the euro as the functional currency, and this subsidiary has a receivable in U.S. dollars, a devaluation of the U.S. dollar against the euro of 10% would result in a foreign exchange loss of the reporting entity of 10% of the value of the underlying U.S. dollar receivable. We cannot predict the effect of exchange rate fluctuations upon future quarterly and annual operating results. The effect of currency exchange rate changes may increase or decrease our costs and/or revenues in any given quarter, and we may experience currency losses in the future. In the first quarter of 2010, we recorded a loss on foreign currency exchange of $0.3 million. To date, we have not adopted a hedging program to protect against risks associated with foreign currency fluctuations.

A significant portion of our revenue is dependent upon sales to government programs, which are impacted by uncertainty of timelines and budgetary allocations, delays in developing technology standards, and changes in laws or regulations pertaining to security.

Large government programs are a primary target for our ID Management business, as higher security systems employing smart card technology are increasingly used to enable applications ranging from authorizing building and network access for federal employees to paying taxes online, to citizen identification, to receiving health care. Sales to U.S. government agencies and other entities comprise a significant portion of our sales. Additionally, we have sold a significant proportion of our smart card reader products to the U.S. government for PC and network access by military and federal employees, and these sales have been an important component of our overall revenue.

Government-sponsored projects are typically characterized by the uncertainty of their timelines and budget allocations and delays in developing technology standards to enable program applications. Additionally, many government programs are subject to changes in laws or regulations, such as those pertaining to authentication of government personnel, trade practices or health insurance documentation. Changes in fiscal policies or decreases in available government funding or grants could adversely affect our sales, as could changes in government programs or applicable requirements. Additionally, discontinuance of, changes in, or lack of adoption of laws or regulations pertaining to security could adversely affect our financial performance.

Over the past several quarters, sales of our SCM Microsystems external smart card readers to the U.S. government have been significantly lower than in previous periods, primarily due to ongoing project and budget delays and a movement by the U.S. government towards purchasing computer equipment with embedded reader capabilities. We continue to believe that we remain a leading supplier of smart card reader technology to the U.S. government market and that we are not losing share to competitors. However, lower overall market demand and the replacement of external smart card reader sales with sales of lower-priced interface chips for embedded readers is a trend that we do not think will reverse.

We anticipate that a significant portion of our future revenues will come from government programs outside the U.S., such as national identity, e-government, e-health and others applications. We currently supply smart card readers for various government programs in Europe and Asia and are actively targeting additional programs in these areas as well as in Latin America. We also have spent significant resources developing a range of e-health smart card terminals for the German government’s electronic health card program. However, the timing of government smart card programs is not always certain and delays in program implementation are common. For example, while the German government had stated that it planned to distribute new electronic health cards to its citizens beginning in early 2009 and to put in place a corresponding network and card reader infrastructure during 2009, there have been delays in this program and the actual timing of equipment and card deployments in the German e-health program remain uncertain. The continued delay of government projects for any reason could negatively impact our sales.

We derive a substantial portion of revenue through the sale of Hirsch solutions to U.S. government entities, pursuant to government contracts which differ materially from standard commercial contracts, involve competitive bidding and may be subject to cancellation or delay without penalty, any of which may produce volatility in our revenues and earnings.

Government contracts frequently include provisions that are not standard in private commercial transactions. For example, government contracts may include bonding requirements and provisions permitting the purchasing agency to cancel or delay the contract without penalty in certain circumstances. In addition, government contracts are frequently awarded only after formal competitive bidding processes, which have been and may continue to be protracted, and typically impose provisions that permit cancellation in the event that necessary funds are unavailable to the public agency. In many cases, unsuccessful bidders for government agency contracts are provided the opportunity to formally protest certain contract awards through various agency, administrative and judicial channels. The protest process may substantially delay a successful bidder’s contract performance, result in cancellation of the contract award entirely and distract management. We may not be awarded contracts for which we bid, and substantial delays or cancellation of purchases may even follow our successful bids as a result of such protests. Furthermore, local government agency contracts may be contingent upon availability of matching funds from federal or state entities. Law enforcement and other government agencies are subject to political, budgetary, purchasing and delivery constraints which may cause our quarterly and annual revenues and operating results to fluctuate in a manner that is difficult to predict.

 

41


Table of Contents

Our U.S. government business is dependent upon receipt of certain governmental approvals or certifications, and failure to receive such approvals or certifications could have a material adverse effect on our sales in those market segments for which such approvals or certifications are customary or required.

The U.S. federal government represents a significant portion of our revenues. Failing to obtain certain government approvals or certifications could have a material adverse effect in those market segments for which such approvals or certifications are customary or required. As newer versions of existing products, or new products in development, are released, they may require certifications or approvals. In addition, the government may introduce new requirements that some existing products will be required to meet. If we fail to obtain any required approvals or certifications for our products, our business will suffer.

Our business could be adversely affected by negative audits by government agencies; we could be required to reimburse the U.S. government for costs that we have expended on government contracts; and our ability to compete successfully for future contracts could be materially impaired.

Government agencies may audit our business as part of their routine audits and investigations of government contracts. As part of an audit, these agencies may review our performance on contracts, cost structures and compliance with applicable laws, regulations and standards. These agencies may also review the adequacy of, and our compliance with, our own internal control systems and policies, including our purchasing, property, estimating, compensation and management information systems. If any of our costs are found to be improperly allocated to a specific contract, the costs may not be reimbursed and any costs already reimbursed for such contract may have to be refunded. An audit could materially affect our business’ competitive position and result in a material adjustment to our financial results or statement of operations. If a government agency audit uncovers improper or illegal activities, we may be subject to civil and criminal penalties and administrative sanctions, including termination of contracts, forfeiture of profits, suspension of payments, fines and suspension or debarment from doing business with the federal government. In addition, our business could suffer serious harm to its reputation if allegations of impropriety were made against it.

While our business has never had a negative audit by a governmental agency, we cannot assure you that one will not occur. If we were suspended or barred from contracting with the federal government generally, or if our reputation or relationships with government agencies were impaired, or if the government otherwise ceased doing business with us or significantly decreased the amount of business it does with us, our revenues and prospects would be materially harmed.

Some of our sales are made through distributors, and the loss of such distributors could result in decreased revenue.

We currently use distributors to sell some of our products, primarily into markets or customers where the distributor may have closer relationships or greater access than we do. Some of these distributors also sell our competitors’ products, and if they favor our competitors’ products for any reason, they may fail to market our products as effectively or to devote resources necessary to provide effective sales, which would cause our sales to suffer. Distribution arrangements are intended to benefit both us and the distributor, and may be long- or short-term relationships, depending on market conditions, competition in the marketplace and other factors. If we are unable to maintain effective distribution channels, there could be a reduction in the amount of product we are able to sell, and our revenues could decrease.

Our business could suffer if our third-party manufacturers cannot meet production requirements.

Many of the Company’s products are manufactured outside the U.S. by contract manufacturers. Our reliance on foreign manufacturing poses a number of risks, including, but not limited to:

 

   

difficulties in staffing;

 

   

currency fluctuations;

 

   

potentially adverse tax consequences;

 

   

unexpected changes in regulatory requirements;

 

   

tariffs and other trade barriers;

 

   

export controls;

 

42


Table of Contents
   

political and economic instability;

 

   

lack of control over the manufacturing process and ultimately over the quality of our products;

 

   

late delivery of our products, whether because of limited access to our product components, transportation delays and interruptions, difficulties in staffing, or disruptions such as natural disasters;

 

   

capacity limitations of our manufacturers, particularly in the context of new large contracts for our products, whether because our manufacturers lack the required capacity or are unwilling to produce the quantities we desire; and

 

   

obsolescence of our hardware products at the end of the manufacturing cycle.

The use of contract manufacturing requires us to exercise strong planning and management in order to ensure that our products are manufactured on schedule, to correct specifications and to a high standard of quality. If any of our contract manufacturers cannot meet our production requirements, we may be required to rely on other contract manufacturing sources or identify and qualify new contract manufacturers. We may be unable to identify or qualify new contract manufacturers in a timely manner or at all or with reasonable terms and these new manufacturers may not allocate sufficient capacity to us in order to meet our requirements. Any significant delay in our ability to obtain adequate supplies of our products from our current or alternative manufacturers would materially and adversely affect our business and operating results. In addition, if we are not successful at managing the contract manufacturing process, the quality of our products could be jeopardized or inventories could be too low or too high, which could result in damage to our reputation with our customers and in the marketplace, as well as possible write-offs of excess inventory.

We have a limited number of suppliers of key components, and may experience difficulties in obtaining components for which there is significant demand.

We rely upon a limited number of suppliers for some key components of our products. For example, we currently utilize the foundry services of external suppliers to produce our ASICs for smart cards readers and inlays, and we use chips and antenna components from third-party suppliers in our contactless smart card readers. Our reliance on a limited number of suppliers may expose us to various risks including, without limitation, an inadequate supply of components, price increases, late deliveries and poor component quality. In addition, some of the basic components used in our digital media reader business, such as digital flash media, may at any time be in great demand. This could result in components not being available to us in a timely manner or at all, particularly if larger companies have ordered more significant volumes of those components, or in higher prices being charged for components. Disruption or termination of the supply of components or software used in our products could delay shipments of our products. These delays could have a material adverse effect on our business and operating results and could also damage relationships with current and prospective customers.

Security breaches in systems we sell or maintain could result in the disclosure of sensitive government information or private personal information that could result in the loss of clients and negative publicity.

Many of the systems we sell manage private personal information and protect information involved in sensitive government functions. A security breach in one of these systems could cause serious harm to our business as a result of negative publicity and could prevent us from having further access to such systems or other similarly sensitive areas for other governmental clients.

As part of our technical support services, we agree, from time to time, to possess all or a portion of the security system database of our customers. This service is subject to a number of risks. For example, our systems may be vulnerable to physical or electronic break-ins and service disruptions that could lead to interruptions, delays or loss of data. If any such compromise of our security were to occur, it could be very expensive to correct, could damage our reputation and could discourage potential customers from using our services. Although we have not experienced attempted break-ins, we may experience such attempts in the future. Our systems may also be affected by outages, delays and other difficulties. Our insurance coverage may be insufficient to cover losses and liabilities that may result from such events.

Failure to properly manage the implementation of customer projects in our business may result in costs or claims against us, and our financial results could be adversely affected.

In our business, deployments of our solutions often involve large-scale projects. The quality of our performance on such projects depends in large part upon our ability to manage relationships with our customers and to effectively manage the implementation of our solutions in such projects and to deploy appropriate resources, including our own project managers and third-party subcontractors, in a timely manner. Any defects or errors or failures to meet clients’ expectations could result in

 

43


Table of Contents

damage to our reputation or even claims for substantial monetary damages against us. In addition, we sometimes provide guarantees to customers that we will complete a project by a scheduled date or that our solutions will achieve defined performance standards. If our solutions experience a performance problem, we may not be able to recover the additional costs we will incur in our remedial efforts, which could materially impair profit derived from a particular project. Moreover, a portion of our revenues are derived from fixed price contracts. Changes in the actual and estimated costs and time to complete fixed-price, time-certain projects may result in revenue adjustments for contracts where revenue is recognized under the percentage of completion method. Finally, if we miscalculate the amount of resources or time we need to complete a project for which we have agreed to capped or fixed fees, our financial results could be adversely affected.

Our products may have defects, which could damage our reputation, decrease market acceptance of our products, cause us to lose customers and revenue and result in costly litigation or liability.

Products such as SCM Microsystems’ smart card readers, Hirsch’s control panels and readers and TagStar’s inlays may contain defects for many reasons, including defective design or manufacture, defective material or software interoperability issues. Often, these defects are not detected until after the products have been shipped. If any of our products contain defects or perceived defects or have reliability, quality or compatibility problems or perceived problems, our reputation might be damaged significantly, we could lose or experience a delay in market acceptance of the affected product or products and we might be unable to retain existing customers or attract new customers. In addition, these defects could interrupt or delay sales. In the event of an actual or perceived defect or other problem, we may need to invest significant capital, technical, managerial and other resources to investigate and correct the potential defect or problem and potentially divert these resources from other development efforts. If we are unable to provide a solution to the potential defect or problem that is acceptable to our customers, we may be required to incur substantial product recall, repair and replacement and even litigation costs. These costs could have a material adverse effect on our business and operating results.

We provide warranties on certain product sales, which range from twelve to twenty-four months, and allowances for estimated warranty costs are recorded during the period of sale. The determination of such allowances requires us to make estimates of product return rates and expected costs to repair or to replace the products under warranty. We currently establish warranty reserves based on historical warranty costs for each product line combined with liability estimates based on the prior twelve months’ sales activities. If actual return rates and/or repair and replacement costs differ significantly from our estimates, adjustments to recognize additional cost of sales may be required in future periods.

In addition, because our customers rely on our Secure Authentication products to prevent unauthorized access to PCs, networks or facilities, a malfunction of or design defect in our products (or even a perceived defect) could result in legal or warranty claims against us for damages resulting from security breaches. If such claims are adversely decided against us, the potential liability could be substantial and have a material adverse effect on our business and operating results. Furthermore, the possible publicity associated with any such claim, whether or not decided against us, could adversely affect our reputation. In addition, a well-publicized security breach involving smart card-based or other security systems could adversely affect the market’s perception of products like ours in general, or our products in particular, regardless of whether the breach is actual or attributable to our products. Any of the foregoing events could cause demand for our products to decline, which would cause our business and operating results to suffer.

We have global operations, which require significant financial, managerial and administrative resources.

Our business model includes the management of separate product lines that address disparate market opportunities that are geographically dispersed. While there is some shared technology across our products, each product line requires significant research and development effort to address the evolving needs of our customers and markets. To support our development and sales efforts, we maintain company offices and business operations in several locations around the world, including Australia, Brazil, Canada, Germany, Hong Kong, India, Japan, the Netherlands, Switzerland and the U.S. We also must manage contract manufacturers in multiple countries, including China and Singapore. Managing our various development, sales, administrative and manufacturing operations places a significant burden on our financial systems and has contributed to a level of operational spending that is disproportionately high compared to our current revenue levels.

Operating in diverse geographic locations also imposes significant burdens on our managerial resources. In particular, our management must:

 

   

divert a significant amount of time and energy to manage employees and contractors from diverse cultural backgrounds and who speak different languages;

 

44


Table of Contents
   

travel between our different company offices;

 

   

maintain sufficient internal financial controls in multiple geographic locations that may have different control environments;

 

   

manage different product lines for different markets;

 

   

manage our supply and distribution channels across different countries and business practices; and

 

   

coordinate these efforts to produce an integrated business effort, focus and vision.

Any failure to effectively manage our operations globally could have a material adverse effect on our business and operating results.

We conduct a significant portion of our operations outside the U.S. Economic, political, regulatory and other risks associated with international sales and operations could have an adverse effect on our results of operation.

We conduct a substantial portion of our business in Europe and Asia. Approximately 44% of our revenue for the first quarter of 2010 and 40% of our revenue for fiscal 2009 was derived from customers located outside the U.S. Our recent acquisition of Bluehill ID further increases our non-US business, as Bluehill ID conducts a substantial portion of its business in Germany, and in the rest of Europe, Canada, Brazil, and Australia. Nearly all of Bluehill ID’s revenue for the first quarter of 2010 and for the year ended December 31, 2009 and was derived from customers located outside the U.S.

Because a significant number of our principal customers are located in other countries, we anticipate that international sales will continue to account for a substantial portion of our revenues. As a result, a significant portion of our sales and operations may continue to be subject to risks associated with foreign operations, any of which could impact our sales and/or our operational performance. These risks include, but are not limited to:

 

   

changes in foreign currency exchange rates;

 

   

changes in a specific country’s or region’s political or economic conditions and stability, particularly in emerging markets;

 

   

unexpected changes in foreign laws and regulatory requirements;

 

   

export controls;

 

   

potentially adverse tax consequences;

 

   

longer accounts receivable collection cycles;

 

   

difficulty in managing widespread sales and manufacturing operations; and

 

   

less effective protection of intellectual property.

Personnel Risks

Our key personnel and directors are critical to our business, and such key personnel may not remain with us in the future.

We depend on the continued employment of our senior executive officers and other key management and technical personnel. If any of our key personnel were to leave and not be replaced with sufficiently qualified and experienced personnel, our business could be adversely affected.

We also believe that our future success will depend in large part on our ability to attract and retain highly qualified technical and management personnel. However, competition for such personnel is intense. We may not be able to retain our key technical and management employees or to attract, assimilate or retain other highly qualified technical and management personnel in the future.

Likewise, as a small, dual-traded company, we are challenged to identify, attract and retain experienced professionals with diverse skills and backgrounds who are qualified and willing to serve on our Board of Directors. The increased burden of regulatory compliance under the Sarbanes-Oxley Act of 2002 creates additional liability and exposure for directors and financial losses in our business and lack of growth in our stock price make it difficult for us to offer attractive director compensation packages. If we are not able to attract and retain qualified board members, our ability to practice a high level of corporate governance could be impaired.

 

45


Table of Contents

Risks of Financial and Capital Markets

Our stock price has been and is likely to remain volatile.

Over the past few years, the NASDAQ Stock Market and the Prime Standard of the Frankfurt Exchange have experienced significant price and volume fluctuations that have particularly affected the market prices of the stocks of technology companies. Volatility in our stock price on either or both exchanges may result from a number of factors, including, among others:

 

   

low volumes of trading activity in our stock, particularly in the U.S.;

 

   

variations in our or our competitors’ financial and/or operational results;

 

   

the fluctuation in market value of comparable companies in any of our markets;

 

   

expected, perceived or announced relationships or transactions with third parties;

 

   

comments and forecasts by securities analysts;

 

   

trading patterns of our stock on the NASDAQ Stock Market or Prime Standard of the Frankfurt Stock Exchange;

 

   

the inclusion or removal of our stock from market indices, such as groups of technology stocks or other indices;

 

   

loss of key personnel;

 

   

announcements of technological innovations or new products by us or our competitors;

 

   

announcements of dispositions, organizational restructuring, headcount reductions, litigation or write-off of investments;

 

   

litigation developments; and

 

   

general market downturns.

In the past, companies that have experienced volatility in the market price of their stock have been the object of securities class action litigation. If we were the object of securities class action litigation, it could result in substantial costs and a diversion of our management’s attention and resources.

SCM common stock has historically traded at a very low volume. The market price of SCM common stock could decline as a result of the large number of shares that have been issued to the former Hirsch and Bluehill ID shareholders and that are currently eligible for sale or securities that have been issued to the former Hirsch shareholders that will become exercisable for shares of SCM common stock in the future.

The new shares of SCM common stock issued as consideration in connection with the acquisition of Hirsch became freely saleable on January 30, 2010 and the warrants to purchase shares of SCM common stock will be exercisable for a two year period beginning on April 30, 2012. The new shares of SCM common stock issued to former Bluehill ID shareholders in the business combination with Bluehill ID are unrestricted and can be freely traded. The new shares of SCM common stock issued to RockWest are subject to a 24-month lock-up period which ends April 13, 2012. Consequently, a substantial number of additional shares of SCM common stock have recently become available for resale in the public market. Stockholders of SCM and former shareholders of Hirsch or Bluehill ID may not wish to continue to invest in the operations of the company or may wish to dispose of some or all of their interests in SCM. Sales of substantial numbers of shares of both the newly issued and the existing SCM common stock in the public market could adversely affect the market price of our stock.

You may experience dilution of your ownership interests due to the future issuance of additional shares of our stock, and future sales of shares of our common stock could have an adverse effect on our stock price.

In connection with the acquisition of Hirsch on April 30, 2009, after giving effect to the acquisition, we issued approximately 9.4 million shares of SCM common stock, and warrants to purchase approximately 4.7 million shares of SCM common stock, as consideration for the outstanding shares of Hirsch common stock. In connection with our business combination with Bluehill ID on January 4, 2010, we issued approximately 15.3 million shares of SCM common stock as consideration for the outstanding shares in Bluehill ID that were tendered in the transaction. In connection with the acquisition of RockWest on April 14,

 

46


Table of Contents

2010, we issued approximately 2.6 million shares of SCM common stock as consideration for the outstanding shares of RockWest stock. From time to time, in the future we also may issue additional previously authorized and unissued securities, resulting in the dilution of the ownership interests of our current stockholders. We are currently authorized to issue up to 60,000,000 shares of common stock. At our 2010 Annual Meeting of Stockholders we are asking our stockholders to consider a proposal to increase the number of authorized shares of common stock by 50,000,000 shares to a total of 110,000,000 shares of common stock. As of May 13, 2010, 43,653,182 shares of common stock were outstanding, including 723,075 shares held in treasury.

In 2007, our Board of Directors and our stockholders approved our 2007 stock option plan, under which, as amended in October 2009, options to purchase 3.5 million shares of our common stock may be granted. As of March 31, 2010, an aggregate of approximately 4.9 million shares of common stock was reserved for future issuance under all our stock option plans, of which 2.3 million shares were subject to outstanding options. We may issue additional shares of our common stock or other securities that are convertible into or exercisable for shares of common stock in connection with the hiring of personnel, future acquisitions, future private placements, or future public offerings of our securities for capital raising or for other business purposes. If we issue additional securities, the aggregate percentage ownership of our existing stockholders will be reduced. In addition, any new securities that we issue may have rights senior to those of our common stock. Additionally, as of March 31, 2010, warrants to purchase approximately 4.9 million shares of SCM common stock were outstanding.

The issuance of additional shares of common stock or preferred stock or other securities, or the perception that such issuances could occur, may create downward pressure on the trading price of our common stock.

The large percentage ownership of SCM common stock by former shareholders of Hirsch and Bluehill ID gives those shareholders significant influence over the outcome of corporate actions requiring stockholder approval.

Immediately following our respective acquisitions of Hirsch and Bluehill ID, the former Hirsch shareholders beneficially owned approximately 37% and the former Bluehill ID shareholders beneficially owned approximately 38% of SCM’s common stock. Accordingly, the former Hirsch and Bluehill ID shareholders hold significant influence over the outcome of any corporate transaction or other matter submitted to the SCM stockholders for approval, including the election of directors, any merger, consolidation or sale of all or substantially all of SCM’s assets or any other significant corporate transaction, such that such former shareholders of Hirsch or Bluehill ID could delay or prevent a change of control of SCM, even if such a change of control would benefit our other stockholders. The interests of the former Hirsch and Bluehill ID shareholders may differ from the interests of other stockholders.

Several of our directors directly or indirectly hold significant amounts of our common stock, and each of them could have significant influence over the outcome of corporate actions requiring board and stockholder approval, respectively. In some cases, their priorities for our business may be different from ours or our other stockholders.

As of May 11, 2010, Mountain Partners AG, together with its affiliates and certain related parties, including Mountain Partners Angel Fund and BH Capital Management (collectively “Mountain Partners”), directly or indirectly owned approximately 18% of the outstanding common shares of our common stock and had the right to vote approximately 15% of the outstanding shares of our common stock. Daniel Wenzel, a director of our Company, is a co-founder and current affiliate of Mountain Partners and also may be deemed to beneficially own, either directly or indirectly through limited partnerships, the SCM shares beneficially owned by Mountain Partners. Additionally, Mr. Wenzel and Ayman S. Ashour, our Chief Executive Officer and Chairman, are also affiliates of BH Capital Management AG, which is 51% owned by Mountain Partners AG and which at May 11, 2010 owned and had the right to vote approximately 5% of the outstanding shares of our common stock. Consequently Messrs. Ashour and Wenzel also may be deemed to beneficially own, either directly or indirectly through limited partnerships, the SCM shares beneficially owned by BH Capital Management AG. As of April 28, 2010, Lincoln Vale owned and had the right to vote approximately 7% of the outstanding shares of our common stock. Dr. Hans Liebler, one of our directors, is a partner of Lincoln Vale and also may be deemed to beneficially own, either directly or indirectly through limited partnerships, the SCM shares beneficially owned by Lincoln Vale. As of May 11, 2010, Lawrence Midland, a director and an executive vice president of SCM, held approximately 3% of our common stock. Mr. Midland’s shares are held in a family trust and in custodianship for his children, and he may be deemed to beneficially own the SCM shares.

Accordingly, Mr. Ayman, Dr. Liebler, Mr. Midland, Mr. Wenzel, BH Capital Management AG, Lincoln Vale and Mountain Partners could each have significant influence over the outcome of corporate actions requiring board and stockholder approval, respectively, including the election of directors, any merger, consolidation or sale of all or substantially all of our assets or any other significant corporate transaction. In addition, Mr. Ayman, Dr. Liebler, Mr. Midland, Mr. Wenzel, BH Capital Management AG, Lincoln Vale and Mountain Partners could each delay or prevent a change of control of SCM, even if such a change of control would benefit our other stockholders.

 

47


Table of Contents

Shares of SCM common stock beneficially owned by our largest investors will count toward whether a quorum is achieved.

To achieve a quorum at SCM’s annual stockholder meeting requires at least one-third of all shares of SCM’s stock entitled to vote be present in person or by proxy at the SCM annual meeting. If the shares beneficially owned by each of Lincoln Vale, Mountain Partners and BH Capital Management AG (including the interests of Messrs. Ashour, Liebler and Wenzel) are present in person or by proxy at the SCM annual meeting, they will contribute approximately 27% toward the 33.3% of shares of SCM common stock required to achieve a quorum.

Our listing on both the NASDAQ Stock Market and the Prime Standard of the Frankfurt Stock Exchange exposes our stock price to additional risks of fluctuation.

Our common stock is listed both on the NASDAQ Stock Market and the Prime Standard of the Frankfurt Stock Exchange and we typically experience the majority of our trading on the Prime Standard. Because of this, factors that would not otherwise affect a stock traded solely on the NASDAQ Stock Market may cause our stock price to fluctuate. For example, European investors may react differently and more positively or negatively than investors in the U.S. to events such as acquisitions, dispositions, one-time charges and higher or lower than expected revenue or earnings announcements. A significant positive or negative reaction by investors in Europe to such events could cause our stock price to increase or decrease significantly. The European economy and market conditions in general, or downturns on the Prime Standard specifically, regardless of the NASDAQ Stock Market conditions, also could negatively impact our stock price.

Provisions in our agreements, charter documents, Delaware law and our rights plan may delay or prevent the acquisition of SCM by another company, which could decrease the value of your shares.

Our certificate of incorporation and bylaws and Delaware law contain provisions that could make it more difficult for a third party to acquire us or enter into a material transaction with us without the consent of our Board of Directors. These provisions include a classified Board of Directors and limitations on actions by our stockholders by written consent. Delaware law imposes some restrictions on mergers and other business combinations between us and any holder of 15% or more of our outstanding common stock. In addition, our Board of Directors has the right to issue preferred stock without stockholder approval, which could be used to dilute the stock ownership of a potential hostile acquirer.

We have adopted a stockholder rights plan. The triggering and exercise of the rights would cause substantial dilution to a person or group that attempts to acquire us on terms or in a manner not approved by our Board of Directors, except pursuant to an offer conditioned upon redemption of the rights. While the rights are not intended to prevent a takeover of our company, they may have the effect of rendering more difficult or discouraging an acquisition of us that was deemed to be undesirable by our Board of Directors.

These provisions will apply even if the offer were to be considered adequate by some of our stockholders. Because these provisions may be deemed to discourage a change of control, they may delay or prevent the acquisition of our company, which could decrease the value of our common stock.

Legal and Regulatory Risks

Our business could be adversely affected by changes in laws or regulations pertaining to security.

The U.S. federal government, contractors to the federal government and certain industries in the public sector currently fall, or may in the future fall, under particular regulations pertaining to security. Some of the laws, regulations, certifications or requirements that may stimulate new security systems sales include the following:

 

   

Homeland Security Presidential Directive (HSPD) 12 and Federal Information Processing Standards (FIPS) 201 produced by National Institute of Standards and Technology (NIST);

 

   

Federal Information Security Management Act (FISMA);

 

   

Transportation Security Administration’s (TSA) Transportation Worker Identification Credential (TWIC) program;

 

   

Sarbanes-Oxley Act of 2002 (also known as the Public Company Accounting Reform and Investor Protection Act);

 

48


Table of Contents
   

Health Insurance Portability and Accountability Act (HIPAA);

 

   

Gramm-Leach Bliley Act of 1999 (GLBA, a.k.a., the Financial Modernization Act);

 

   

Customs-Trade Partnership Against Terrorism (C-TPAT);

 

   

Free and Secure Trade Program (FAST);

 

   

Chemical Facility Anti Terrorism Standards (CFATS); and

 

   

various codes of the Code of Federal Regulations (CFR).

Discontinuance of, changes in, or lack of adoption of laws or regulations pertaining to security could adversely affect our performance.

We are subject to extensive government regulation, and any failure to comply with applicable regulations could subject us to penalties that may restrict our ability to conduct our business.

Our business is affected by and must comply with various government regulations that impact its operating costs, profit margins and its internal organization and operations. Furthermore, our business may be audited to assure compliance with these requirements. Any failure to comply with applicable regulations, rules and approvals could result in the imposition of penalties, the loss of government contracts or the cancellation of our General Services Administration contract, any of which could adversely affect our business, financial condition and results of operations. Among the most significant regulations affecting our business are the following:

 

   

the Federal Acquisition Regulations, or the FAR, and agency regulations supplemental to the FAR, which comprehensively regulate the formation and administration of, and performance under government contracts;

 

   

the Truth in Negotiations Act, which requires certification and disclosure of all cost and pricing data in connection with contract negotiations;

 

   

the Cost Accounting Standards, which impose accounting requirements that govern our right to reimbursement under cost-based government contracts;

 

   

the Foreign Corrupt Practices Act; and

 

   

laws, regulations and executive orders restricting the use and dissemination of information classified for national security purposes and the exportation of certain products and technical data.

These regulations affect how our customers can do business with us, and, in some instances, the regulations impose added costs on our business. Any changes in applicable laws and regulations could restrict our ability to conduct our business. Any failure to comply with applicable laws and regulations could result in contract termination, price or fee reductions or suspension or debarment from contracting with the federal government generally.

If we are unable to continue to obtain U.S. government authorization regarding the export of our products, or if current or future export laws limit or otherwise restrict our business, we could be prohibited from shipping our products to certain countries, which could cause our business, financial condition and results of operations to suffer.

In our business, we must comply with U.S. and European Union (“EU”) laws, among others, regulating the export of our products. In some cases, explicit authorization from the U.S. or an EU government is needed to export our products. The export regimes and the governing policies applicable to our business are subject to changes. We cannot be certain that such export authorizations will be available to us or for our products in the future. In some cases, we rely upon the compliance activities of our prime contractors, and we cannot be certain they have taken or will take all measures necessary to comply with applicable export laws. If we or our prime contractor partners cannot obtain required government approvals under applicable regulations, we may not be able to sell our products in certain international jurisdictions.

We face risks from future claims of third parties and litigation.

From time to time, we may be subject to claims of third parties, possibly resulting in litigation, which could include, among other things, claims regarding infringement of the intellectual property rights of third parties, product defects, employment-related claims, and claims related to acquisitions, dispositions or restructurings. Any such claims or litigation may be time-consuming

 

49


Table of Contents

and costly, divert management resources, cause product shipment delays, require us to redesign our products, require us to accept returns of products and to write off inventory, or have other adverse effects on our business. Any of the foregoing could have a material adverse effect on our results of operations and could require us to pay significant monetary damages.

We expect the likelihood of intellectual property infringement and misappropriation claims may increase as the number of products and competitors in our markets grows and as we increasingly incorporate third-party technology into our products. As a result of infringement claims, we could be required to license intellectual property from a third-party or redesign our products. Licenses may not be offered when we need them or on acceptable terms. If we do obtain licenses from third parties, we may be required to pay license fees or royalty payments or we may be required to license some of our intellectual property to others in return for such licenses. If we are unable to obtain a license that is necessary for us or our third-party manufacturers to manufacture our allegedly infringing products, we could be required to suspend the manufacture of products or stop our suppliers from using processes that may infringe the rights of third parties. We may also be unsuccessful in redesigning our products. Our suppliers and customers may be subject to infringement claims based on intellectual property included in our products. We have historically agreed to indemnify our suppliers and customers for patent infringement claims relating to our products. The scope of this indemnity varies, but may, in some instances, include indemnification for damages and expenses, including attorney’s fees. We may periodically engage in litigation as a result of these indemnification obligations. Our insurance policies exclude coverage for third-party claims for patent infringement.

We may be exposed to risks of intellectual property infringement by third parties.

Our success depends significantly upon our proprietary technology. We currently rely on a combination of patent, copyright and trademark laws, trade secrets, confidentiality agreements and contractual provisions to protect our proprietary rights, which afford only limited protection. We may not be successful in protecting our proprietary technology through patents, it is possible that no new patents will be issued, that our proprietary products or technologies are not patentable or that any issued patent will fail to provide us with any competitive advantages.

There has been a great deal of litigation in the technology industry regarding intellectual property rights, and from time to time we may be required to use litigation to protect our proprietary technology. This may result in our incurring substantial costs and we may not be successful in any such litigation.

Despite our efforts to protect our proprietary rights, unauthorized parties may attempt to copy aspects of our products or to use our proprietary information and software without authorization. In addition, the laws of some foreign countries do not protect proprietary and intellectual property rights to the same extent as do the laws of the U.S. Because many of our products are sold and a significant portion of our business is conducted outside the U.S., our exposure to intellectual property risks may be higher. Our means of protecting our proprietary and intellectual property rights may not be adequate. There is a risk that our competitors will independently develop similar technology or duplicate our products or design around patents or other intellectual property rights. If we are unsuccessful in protecting our intellectual property or our products or technologies are duplicated by others, our business could be harmed.

Changes in tax laws or the interpretation thereof, adverse tax audits and other tax matters may adversely affect our future results.

A number of factors may impact our tax position, including:

 

   

the jurisdictions in which profits are determined to be earned and taxed;

 

   

the resolution of issues arising from tax audits with various tax authorities;

 

   

changes in the valuation of our deferred tax assets and liabilities;

 

   

adjustments to estimated taxes upon finalization of various tax returns;

 

   

increases in expenses not deductible for tax purposes; and

 

   

the repatriation of non-U.S. earnings for which we have not previously provided for U.S. taxes.

Any of these factors could make it more difficult for us to project or achieve expected tax results. An increase or decrease in our tax liabilities due to these or other factors could adversely affect our financial results in future periods.

 

50


Table of Contents

Changes to financial accounting standards may affect our results of operations and cause us to change our business practices.

We prepare our financial statements to conform with U.S. GAAP. These accounting principles are subject to interpretation by the Financial Standards Accounting Board, the American Institute of Certified Public Accountants, the SEC and various other bodies formed to interpret and create appropriate accounting rules and policies. A change in those rules or policies could have a significant effect on our reported results and may affect our reporting of transactions completed before a change is announced. Any changes in accounting rules or policies in the future may result in significant accounting charges.

We face costs and risks associated with maintaining effective internal controls over financial reporting, and if we fail to achieve and maintain adequate internal controls over financial reporting, our business, results of operations and financial condition, and investors’ confidence in us could be materially affected.

Under Sections 302 and 404 of the Sarbanes-Oxley Act of 2002, our management is required to make certain assessments and certifications regarding our disclosure controls and internal controls over financial reporting. We have dedicated, and expect to continue to dedicate, significant management, financial and other resources in connection with our compliance with Section 404 of the Sarbanes-Oxley Act. The process of maintaining and evaluating the effectiveness of these controls is expensive, time-consuming and requires significant attention from our management and staff. During the course of our evaluation, we may identify areas requiring improvement and may be required to design enhanced processes and controls to address issues identified through this review. This could result in significant delays and costs to us and require us to divert substantial resources, including management time from other activities. We have found a material weakness in our internal controls in the past and we cannot be certain in the future that we will be able to report that our controls are without material weakness or to complete our evaluation of those controls in a timely fashion.

If we fail to maintain an effective system of disclosure controls or internal control over financial reporting, we may not be able to rely on the integrity of our financial results, which could result in inaccurate or late reporting of our financial results and investigation by regulatory authorities. If we fail to achieve and maintain adequate internal controls the financial position of our business could be harmed; current and potential future shareholders could lose confidence in us and/or our reported financial results, which may cause a negative effect on the trading price of our common stock; and we could be exposed to litigation or regulatory proceedings, which may be costly or divert management attention.

In addition, all internal control systems, no matter how well designed and operated, can only provide reasonable assurance that the objectives of the control system are met. Because there are inherent limitations in all control systems, no evaluation of control can provide absolute assurance, that all control issues and instances of fraud, if any, within the Company have been or will be detected. Projections of any evaluation of controls effectiveness to future periods are subject to risks. Over time, controls may become inadequate because of changes in conditions or deterioration in the degree of compliance with policies or procedures. Any failure of our internal control systems to be effective could adversely affect our business.

 

51


Table of Contents

combination, we fail to staff our accounting and finance function adequately, or maintain internal controls adequate to meet the demands that are placed upon us as a U.S. public company, including the requirements of the Sarbanes-Oxley Act, we may be unable to report our financial results accurately or in a timely manner and our business and stock price may suffer. The costs of being a public company, as well as diversion of management’s time and attention, may have a material adverse effect on our future business, financial condition and results of operations.

Qualified management, marketing, and sales personnel are difficult to locate, hire and train, and if we cannot attract and retain qualified personnel, it will harm the ability of our business to grow.

The success of our company depends, in part, on the continued service of key managerial, marketing and sales personnel. Competition for qualified management, technical, sales and marketing employees is intense. We cannot assure you that we will be able to attract, retain and integrate employees to develop and continue our business and strategies as a combined company.

 

Item 2. Unregistered Sales of Equity Securities and Use of Proceeds

None

 

Item 3. Defaults upon Senior Securities

None

 

Item 4. Reserved

None.

 

Item 5. Other Information

None

 

Item 6. Exhibits

Exhibits are listed on the Index to Exhibits at the end of this Quarterly Report. The exhibits required by Item 601 of Regulation S-K, listed on such Index in response to this Item, are incorporated herein by reference.

 

52


Table of Contents

SIGNATURES

Pursuant to the requirements of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned thereunto duly authorized.

 

    Registrant
    SCM MICROSYSTEMS, INC.
May 17, 2010      

/S/    AYMAN S. ASHOUR        

      Ayman S. Ashour
      Chairman of the Board and Chief Executive Officer
      (Principal Executive Officer and Director)
May 17, 2010      

/S/    MELVIN DENTON-THOMPSON        

      Melvin Denton-Thompson
      Chief Financial Officer and Secretary
      (Principal Financial and Accounting Officer)

 

53


Table of Contents

EXHIBIT INDEX

 

Exhibit

Number

  

DESCRIPTION OF DOCUMENT

  3.1    Fourth Amended and Restated Certificate of Incorporation, as amended. (Filed previously as an exhibit to SCM’s Registration Statement on Form S-4/A dated November 10, 2009 (see SEC File No. 333-162618).)
  3.2    Amended and Restated Bylaws of Registrant. (Filed previously as an exhibit to SCM’s Quarterly Report on Form 10-Q for the quarter ended September 30, 2002 (see SEC File No. 000-22689).)
  3.3    Certificate of Designation of Rights, Preferences and Privileges of Series A Participating Preferred Stock of SCM Microsystems, Inc. (Filed previously as an exhibit to SCM’s Registration Statement on Form 8-A (See SEC File No. 000-29440).)
  3.4    Amendment to Fourth Amended and Restated Certificate of Incorporation.
  4.1    Form of Registrant’s Common Stock Certificate. (Filed previously as an exhibit to SCM’s Registration Statement on Form S-4/A dated November 10, 2009 (see SEC File No. 333-162618).)
  4.2    Preferred Stock Rights Agreement, dated as of November 8, 2002, between SCM Microsystems, Inc. and American Stock Transfer and Trust Company. (Filed previously as an exhibit to SCM’s Registration Statement on Form 8-A (See SEC File No. 000-29440).)
  4.3    First Amendment to Rights Agreement, dated as of December 10, 2008, between SCM Microsystems, Inc. and American Stock Transfer and Trust Company. (Filed previously as an exhibit to SCM’s Quarterly Report on Form 10-Q for the quarter ended March 31, 2009 (see SEC File No. 000-29440).)
  4.4    Second Amendment to Rights Agreement, dated as of November 16, 2009, between SCM Microsystems, Inc. and American Stock Transfer and Trust Company. (Filed previously as an exhibit to SCM’s Current Report on Form 8-K dated November 16, 2009 (see SEC File No. 000-29440).)
  4.5    Form of Warrant Certificate. (Filed previously as an exhibit to SCM’s Quarterly Report on Form 10-Q for the quarter ended March 31, 2009 (see SEC File No. 000-29440).)
10.1*    Form of Director and Officer Indemnification Agreement. (Filed previously as an exhibit to SCM’s Current Report on Form 8-K dated March 25, 2009 (see SEC File No. 000-29440).)
10.2*    Amended 1997 Stock Plan. (Filed previously as an exhibit to SCM’s Quarterly Report on Form 10-Q for the quarter ended June 30, 2003 (see SEC File No. 000-29440).)
10.3*    2000 Non-statutory Stock Option Plan. (Filed previously as an exhibit to SCM’s Registration Statement on Form S-8 (See SEC File No. 333-51792).)
10.4    Sublease Agreement, dated December 14, 2000 between Microtech International and Golden Goose LLC. (Filed previously as an exhibit to SCM’s Annual Report on Form 10-K for the year ended December 31, 2000 (See SEC File No. 000-22689).)
10.5    Tenancy Agreement dated August 31, 2001 between SCM Microsystems GmbH and Claus Czaika. (Filed previously as an exhibit to SCM’s Annual Report on Form 10-K for the year ended December 31, 2001 (See SEC File No. 000-22689).)
10.6    Addendum No. 1 to the Lease Agreement of August 31, 2001, dated February 4, 2004. (Filed previously as an exhibit to SCM’s Annual Report on Form 10-K for the year ended December 31, 2008 (see SEC File No. 000-29440).)
10.7    Addendum No. 2 to the Lease Agreement of August 31, 2001, dated June 2, 2008. (Filed previously as an exhibit to SCM’s Annual Report on Form 10-K for the year ended December 31, 2008 (see SEC File No. 000-29440).)
10.8    Shuttle Technology Group Unapproved Share Option Scheme. (Filed previously as an exhibit to SCM’s Registration Statement on Form S-8 (See SEC File No. 333-73061).)
10.9*    Management by Objective (MBO) Bonus Program Guide. (Filed previously as an exhibit to SCM’s Annual Report on Form 10-K for the year ended December 31, 2004 (See SEC File No. 000-29440).)
10.10*    Amended Employment Agreement between SCM Microsystems GmbH and Dr. Manfred Mueller dated June 8, 2006. (Filed previously as an exhibit to SCM’s Quarterly Report on Form 10-Q for the quarter ended June 30, 2006 (see SEC File No. 000-29440).)


Table of Contents
10.11    Lease dated July 15, 2006 between SCM Microsystems and Rreef America Reit II Corp. (Filed previously as an exhibit to SCM’s Annual Report on Form 10-K for the year ended December 31, 2006 (See SEC File No. 000-29440).)
10.12*    Supplementary Employment Agreement between SCM Microsystems GmbH and Stephan Rohaly dated December 12, 2006. (Filed previously as an exhibit to SCM’s Current Report on Form 8-K, dated December 18, 2006 (see SEC File No. 000-29440).)
10.13*    Employment Agreement between Felix Marx and SCM dated July 31, 2007. (Filed previously as an exhibit to SCM’s Current Report on Form 8-K, dated August 1, 2007 (see SEC File No. 000-29440).)
10.14*    Amended 2007 Stock Option Plan. (Filed previously as an exhibit to SCM’s Quarterly Report on Form 10-Q for the quarter ended September 30, 2009 (see SEC File No. 000-29440).)
10.15*    Employment Agreement between Sour Chhor and SCM GmbH dated January 21, 2008. (Filed previously as an exhibit to SCM’s Current Report on Form 8-K, dated January 24, 2008 (see SEC File No. 000-29440).)
10.16*    Side Letter to the Employment Agreement between Sour Chhor and SCM GmbH dated January 23, 2008. (Filed previously as an exhibit to SCM’s Current Report on Form 8-K, dated January 24, 2008 (see SEC File No. 000-29440).)
10.17*    Supplementary Employment Agreement between SCM Microsystems GmbH and Felix Marx dated July 30, 2008. (Filed previously as an exhibit to SCM’s Current Report on Form 8-K dated August 5, 2008 (see SEC File No. 000-22689).)
10.18*    Supplementary Employment Agreement between SCM Microsystems GmbH and Stephan Rohaly dated July 30, 2008. (Filed previously as an exhibit to SCM’s Current Report on Form 8-K dated August 5, 2008 (see SEC File No. 000-22689).)
10.19    Code of Conduct and Ethics revised October 2008. (Filed previously as an exhibit to SCM’s Current Report on Form 8-K dated October 28, 2008 (see SEC File No. 000-29440).)
10.20    Agreement and Plan of Merger among SCM Microsystems, Inc., Deer Acquisition, Inc., Hart Acquisition LLC and Hirsch Electronics Corporation dated as of December 10, 2008. (Filed previously as an exhibit to SCM’s Current Report on Form 8-K dated December 11, 2008 (see SEC File No. 000-29440).)
10.21*    Resignation Agreement between Sour Chhor and SCM GmbH dated February 5, 2009. (Filed previously as an exhibit to SCM’s Annual Report on Form 10-K for the year ended December 31, 2008 (see SEC File No. 000-29440).)
10.22*    Employment Agreement of Lawrence W. Midland, dated December 10, 2008. (Filed previously as an exhibit to SCM’s Current Report on Form 8-K, dated April 29, 2009 (see SEC File No. 000-29440).)
10.23    Stockholder Agreement, dated December 10, 2008. (Filed previously as an exhibit to SCM’s Current Report on Form 8-K, dated April 29, 2009 (see SEC File No. 000-29440).)
10.24    Settlement Agreement, dated April 8, 2009. (Filed previously as an exhibit to SCM’s Current Report on Form 8-K, dated April 29, 2009 (see SEC File No. 000-29440).)
10.25    Amended and Restated 1994 Settlement Agreement, dated April 8, 2009. (Filed previously as an exhibit to SCM’s Current Report on Form 8-K, dated April 8, 2009 (see SEC File No. 000-29440).)
10.26    Limited Guarantee, dated April 8, 2009. (Filed previously as an exhibit to SCM’s Current Report on Form 8-K, dated April 8, 2009 (see SEC File No. 000-29440).)
10.27*    Termination Agreement between Stephan Rohaly and SCM Microsystems GmbH dated September 30, 2009. (Filed previously as an exhibit to SCM’s Current Report on Form 8-K, dated September 30, 2009 (see SEC File No. 000-29440).)
10.28    Business Combination Agreement, dated September 20, 2009, between SCM Microsystems, Inc. and Bluehill ID AG. (Filed previously as an exhibit to SCM’s Current Report on Form 8-K, dated September 21, 2009 (see SEC File No. 000-29440).)
10.29    Amendment to Business Combination Agreement, dated October 20, 2009, between SCM Microsystems, Inc. and Bluehill ID AG. (Filed previously within Annex A of SCM’s Form S4/A Amended Registration Statement, dated November 12, 2009 (see SEC File No. 333-162618).)
10.30*    Employment Agreement by and between Ayman S. Ashour and Bluehill ID Services AG, dated December 1, 2009. (Filed previously as an exhibit to SCM’s Current Report on Form 8-K, dated January 4, 2010 (see SEC File No. 000-29440).)


Table of Contents
10.31*    Employment Agreement by and between Bluehill Microtech GmbH and Missions-Cadres SARL, dated April 29, 2008. (Filed previously as an exhibit to SCM’s Current Report on Form 8-K, dated January 21, 2010 (see SEC File No. 000-29440).)
10.32*    Employment Agreement by and between SCM Microsystems, Inc. and Joseph Tassone, dated February 22, 2010. (Filed previously as an exhibit to SCM’s Current Report on Form 8-K, dated February 22, 2010 (see SEC File No. 000-29440).)
10.33*    Termination Agreement and Release by and between SCM Microsystems, Inc. and Felix Marx, dated March 1, 2010. (Filed previously as an exhibit to SCM’s Current Report on Form 8-K, dated March 1, 2010 (see SEC File No. 000-29440).)
10.34*    Employment Agreement by and between SCM Microsystems, Inc. and Felix Marx, dated March 1, 2010. (Filed previously as an exhibit to SCM’s Current Report on Form 8-K, dated March 1, 2010 (see SEC File No. 000-29440).)
10.35*    Termination Agreement and Release by and between SCM Microsystems, Inc. and Manfred Mueller, dated February 28, 2010. (Filed previously as an exhibit to SCM’s Current Report on Form 8-K, dated March 1, 2010 (see SEC File No. 000-29440).)
10.36*    Employment Agreement by and between SCM Microsystems, Inc. and Manfred Mueller, dated February 28, 2010. (Filed previously as an exhibit to SCM’s Current Report on Form 8-K, dated March 1, 2010 (see SEC File No. 000-29440).)
10.37    Share Purchase Agreement between SCM Microsystems, Inc. d/b/a/ Identive Group, Dr. George Levy, Mr. Matt McDaniel, GL Investments, LLC, Mr. Hugo Garcia, Mr. Stan Kenney and RockWest Technology Group LLC dated March 30, 2010. (Filed previously as an exhibit to SCM’s Current Report on Form 8-K, dated March 31, 2010 (see File no. 000-29440).)
10.38*    Employment Agreement between Bluehill ID AG and John Rogers dated January 5, 2009.
10.39*    Amendment No. 1 to the Employment Agreement between Bluehill ID AG and John Rogers dated March 16, 2010.
31.1    Certification of Chief Executive Officer pursuant to Rule 13a-14(a) of the Securities Exchange Act of 1934.
31.2    Certification of Chief Financial Officer pursuant to Rule 13a-14(a) of the Securities Exchange Act of 1934.
32    Certification of Chief Executive Officer and Chief Financial Officer pursuant to 18 U.S.C. Section 1350, as adopted pursuant to Section 906 of the Sarbanes-Oxley Act of 2002.

 

* Denotes management compensatory arrangement.