Table of Contents

---

United States Securities and Exchange Commission
Washington, D.C. 20549

FORM 10-K

FOR THE TRANSITION PERIOD FROM                TO               

---

COMMISSION FILE NUMBER 1-11846

AptarGroup, Inc.

475 WEST TERRA COTTA AVENUE, SUITE E, CRYSTAL LAKE, ILLINOIS 60014

815-477-0424

Securities Registered Pursuant to Section 12(b) of the Act:

Securities Registered Pursuant to Section 12 (g) of the Act:
NONE

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act.

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act.

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15 (d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files).

Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K is not contained herein, and will not be contained, to the best of registrant's knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K. o

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company. See definitions of "large accelerated filer", "accelerated filer" and "smaller reporting company" in Rule 12b-2 of the Exchange Act. (Check one):

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Act).

The aggregate market value of the common stock held by non-affiliates as of June 28, 2013 was $3,522,594,287.

The number of shares outstanding of common stock, as of February 24, 2014, was 65,529,856 shares.

DOCUMENTS INCORPORATED BY REFERENCE

Portions of the definitive Proxy Statement to be delivered to stockholders in connection with the Annual Meeting of Stockholders to be held May 7, 2014 are incorporated by reference into Part III of this report.

---

Table of Contents

---

AptarGroup, Inc.

FORM 10-K

For the Year Ended December 31, 2013

INDEX

---

---

i /ATR

2013 Form 10-K

---

Table of Contents

PART I

ITEM 1.    BUSINESS

BUSINESS OF APTARGROUP

 We are a leading global solution provider of a broad range of innovative packaging delivery solutions primarily for the beauty, personal care, home care, prescription drug, consumer health care, injectables, food and beverage markets. Our creative packaging solutions enhance the convenience, safety and security of consumers around the globe and allow our customers to differentiate their products in the market.

        Our business was started in the late 1940's, manufacturing and selling aerosol valves in the United States, and has grown primarily through the acquisition of relatively small companies and internal expansion. We were incorporated in Delaware in 1992. In this report, we may refer to AptarGroup, Inc. and its subsidiaries as "AptarGroup" or the "Company".

        We have manufacturing facilities located throughout the world including North America, Europe, Asia and South America. We have over 5,000 customers with no single customer or group of affiliated customers accounting for greater than 6% of our 2013 net sales.

        Sales of our dispensing systems have traditionally grown at a faster rate than the overall packaging industry as consumers' preference for convenience has increased and product differentiation through packaging design has become more important to our customers. Consumer product marketers have converted many of their products to packages with dispensing systems that offer the benefit of enhanced shelf appeal, convenience, cleanliness or accuracy of dosage. We expect this trend to continue.

        While we offer a wide variety of dispensing and sealing solutions, our primary products are dispensing pumps, closures, aerosol valves and elastomer primary packaging components.

        Dispensing pumps are finger-actuated dispensing systems that dispense a spray or lotion from non-pressurized containers. The style of pump used depends largely on the nature of the product being dispensed, from small, fine mist pumps used with perfume and pharmaceutical products to lotion pumps for more viscous formulas.

        Closures are primarily dispensing closures but to a lesser degree can include non-dispensing closures. Dispensing closures are plastic caps, primarily for plastic containers such as bottles and tubes, which allow a product to be dispensed without removing the cap.

        Aerosol valves dispense product from pressurized containers. The majority of the aerosol valves that we sell are continuous spray valves, with the balance being metered dose inhaler valves.

        We also manufacture and sell elastomer primary packaging components. These components are used in the injectables market. Products include stoppers for infusion, antibiotic, lyophilization and diagnostic vials. Our elastomer components also include pre-filled syringe components, such as plungers, needle shields, tip caps and cartridges, as well as dropper bulbs and disposable syringe plungers.

AVAILABLE INFORMATION

 Our periodic and current reports are available, free of charge, through a link on the Investors page of our website (www.aptar.com), as soon as reasonably practicable after the material is electronically filed with, or furnished to, the SEC. Also posted on our website are the charters for our Audit, Compensation, Governance and Executive Committees, our Governance Principles, our Code of Business Conduct & Ethics and our Director Independence Standards. Within the time period required by the SEC and the New York Stock Exchange ("NYSE"), we will post on our website any amendment to or waiver to the Code of Business Conduct & Ethics applicable to any executive officer or director. The information provided on our website is not part of this report and is therefore not incorporated herein by reference.

DESCRIPTION OF APTARGROUP'S REPORTING SEGMENTS

FINANCIAL INFORMATION ABOUT SEGMENTS

 AptarGroup's organizational structure consists of three market-focused business segments which are Beauty + Home, Pharma and Food + Beverage. This is a strategic structure which allows us to be more closely aligned with our customers and the markets in which they operate. Operations that sell dispensing systems primarily to the beauty, personal care and home care markets form the Beauty + Home segment. Operations that sell dispensing systems or primary packaging components to the prescription drug, consumer health care and injectables markets form the Pharma segment. Operations that sell dispensing systems to the food and beverage markets form the Food + Beverage segment. Each of these three business segments is described more fully below. A summary of sales, segment income and total assets based upon this reporting structure for each of the last three years is shown in Note 17 to the Consolidated Financial Statements in Item 8 (which is incorporated by reference herein).

1 /ATR

2013 Form 10-K

---

Table of Contents

BEAUTY + HOME

 The Beauty + Home segment is our largest segment in terms of net sales and total assets representing 59% and 53% of AptarGroup's Net Sales and Total Assets, respectively. The Beauty + Home segment primarily sells pumps, closures, aerosol valves and accessories to the personal care and home care markets and pumps and decorative components to the beauty market. We believe we are the largest supplier for the majority of the products we sell to the beauty, personal care and home care markets.

 Beauty.    Sales to the beauty market accounted for approximately 46% of the segment's total net sales in 2013. The beauty market requires a broad range of spray pumps and sampling dispensing systems to meet functional as well as aesthetic requirements. A considerable amount of research, time and coordination with our customers is required to qualify a pump for use with their products. Within the market, we expect the use of pumps to continue to increase, particularly in the cosmetics and sampling sectors of this market. In the cosmetic sector, packaging for certain products such as natural and organic cosmetics and anti-aging lotions continue to provide us with growth opportunities. Our cosmetic lotion pumps, airless dispensing systems and lotion sampling devices, and decorative capabilities will also provide growth opportunities. We have experienced significant growth in recent years in Latin America, particularly in the sales of our products to the beauty market, and we believe there are significant opportunities for growth in the sale of our products for cosmetic applications in Asia.

 Personal Care.    Sales to the personal care market accounted for approximately 45% of the segment's total net sales in 2013 and primarily included sales of fine mist spray pumps, lotion pumps, closures and continuous spray aerosol valves. Personal care spray pump applications include hair care, body care and sun care products. Typical lotion pump applications include skin moisturizers, hand sanitizers and soap. Personal care closures applications include shampoos and conditioners. Personal care continuous aerosol valve applications include hair care products, deodorants, shaving creams and sun care products. Our research and development teams continue to design unique accessories that increase the value of our continuous aerosol valve offerings.

 Home Care.    Sales to the home care market accounted for approximately 8% of the segment's total net sales in 2013 and primarily included sales of continuous or metered dose spray aerosol valves, closures and to a lesser degree spray and lotion pumps. Applications for continuous spray valves include disinfectants, spray paints, insecticides and automotive products. Metered dose valves are used for air fresheners. Closure applications include liquid detergents and household cleansers. Spray and lotion pump applications primarily include household and industrial cleaners.

PHARMA

 The Pharma segment is our second largest segment in terms of net sales and total assets, accounting for 28% and 27% of AptarGroup's Net Sales and Total Assets, respectively, and is our most profitable segment. We believe we are the leading supplier of pumps and metered dose inhaler valves ("MDI's") to the pharmaceutical market worldwide and we believe we are the number three supplier of elastomer primary packaging components worldwide. Characteristics of this market include (i) governmental regulation of our pharmaceutical customers, (ii) contaminant-controlled manufacturing environments, and (iii) a significant amount of time and research from initially working with pharmaceutical companies at the molecular development stage of a medication through the eventual distribution to the market. We have clean-room manufacturing facilities in Argentina, China, France, Germany, India, Switzerland and the United States. We believe that providing an alternative to traditional medication forms such as pills with value-added, convenient dispensing systems will continue to offer opportunities for our business.

 Prescription Drug.    Sales to the prescription drug market accounted for approximately 54% of the segment's total net sales in 2013. Pumps sold to the prescription drug market deliver medications nasally, orally or topically. Currently the majority of our pumps sold are for nasal allergy treatments. Recently, our nasal pumps were also sold on pain management products primarily for post-operative pain management. Potential opportunities for providing alternatives to the traditional pill form of medication include pump dispensing systems for vaccine treatment, additional cold and flu treatments and hormone replacement therapies.

        MDI's are used for dispensing precise amounts of medication. This aerosol technology allows medication to be broken up into very fine particles, which enables the drug to be delivered typically via the pulmonary system. Currently the majority of our MDI's sold are used for respiratory ailments.

        We continue to develop new dispensing systems and accessories in this segment. Our dose indicator for use with MDI's lets patients know how many doses are left in a container. This dose indicator recently launched in the market on two different products—a European asthma medication and a U.S. allergy treatment. We also developed new delivery device technologies featuring lock-out capabilities. We are also exploring new categories such as sleep aids and hormone replacement therapies. While we expect that these new products will come to market in the future, it is difficult to estimate when, as the rigors of pharmaceutical regulations affect the timing of product introductions by our pharmaceutical customers which use our dispensing systems.

 Consumer Health Care.    Sales to the consumer health care market accounted for approximately 26% of the segment's total net sales in 2013. Applications for this market are similar to the pharmaceutical market; however, these applications are sold

2 /ATR

2013 Form 10-K

---

Table of Contents

over the counter without a prescription. Typical consumer health care spray pump applications include nasal decongestants, nasal salines and cough and cold applications. Typical consumer health care valve applications include nasal saline using our bag-on valve technology. Other products sold to this market include dispensing closures primarily for ophthalmic liquid products and lotion and airless systems for dermal applications.

 Injectables.    On July 3, 2012, the Company completed its acquisition of Rumpler—Technologies S.A., together with its direct and indirect subsidiaries ("Stelmi"), for approximately $188 million. Stelmi is a producer of elastomer primary packaging components for injectable drug delivery and operates two manufacturing plants and a research and development facility in France. Sales to the injectables market accounted for approximately 20% of the segment's total net sales in 2013. Injectable products offered include stoppers for infusion, antibiotic, lyophilization and diagnostic vials. Injectables also include pre-filled syringe components, such as plungers, needle shields, tip caps and cartridges, as well as dropper bulbs and disposable syringe plungers.

FOOD + BEVERAGE

 The Food + Beverage segment is our smallest segment in terms of net sales and total assets representing 13% and 10% of AptarGroup's Net Sales and Total Assets, respectively, but has been our fastest growing segment. We primarily sell dispensing closures and to a lesser degree, non-dispensing closures, spray pumps and aerosol valves to the food and beverage markets.

        Sales of dispensing closures have grown as consumers worldwide have demonstrated a preference for a package utilizing the convenience of a dispensing closure. At the same time, consumer marketers are trying to differentiate their products by incorporating performance enhancing features such as bonded to plastic aluminum liners, flow-control and no-drip dispensing, inverted packaging and directional flow to make packages simpler to use, cleaner and more appealing to consumers.

 Food.    Sales to the food market accounted for approximately 56% of the segment's total net sales in 2013 and primarily include sales of dispensing closures and flow-control technologies. To a lesser degree we also sell non-dispensing closures, spray pumps and aerosol valves to this market. Applications for dispensing closures include sauces, condiments and food products. Applications for non-dispensing closures include granular and powder food products. Applications for continuous spray valves include cooking sprays. Spray pump applications primarily include butter or salad dressing sprays.

 Beverage.    Sales to the beverage market accounted for approximately 42% of the segment's total net sales in 2013 and primarily include sales of dispensing closures and flow-control technologies. Sales of dispensing closures to the beverage market have increased significantly over the last several years as we continue to see an increase of interest from marketers using dispensing closures for their products. Examples of beverage products currently utilizing dispensing closures include bottled water, sport and energy drinks, juices and concentrated water flavorings. Examples of beverage products currently utilizing lotion pump technologies include syrups and concentrates.

GENERAL BUSINESS INFORMATION

GROWTH STRATEGY

 We seek to enhance our position as a leading global solution provider of innovative packaging delivery solutions by (i) expanding geographically, (ii) converting non-convenient, non-dispensing applications to convenient dispensing systems, (iii) replacing current dispensing applications with more value-added dispensing products and (iv) developing or acquiring new dispensing, safety or security technologies.

        We are committed to expanding geographically to serve local and multinational customers in existing and emerging areas. Targeted areas include Asia, South America, and Eastern Europe. During 2014, we expect to commence manufacturing operations in Colombia to better serve the Andean region.

        We believe significant opportunities exist to introduce our dispensing systems to replace non-dispensing applications. Examples of these opportunities include potential conversion in the food and beverage markets for single and multi-serve non-carbonated beverages, condiments, cooking oils and infant formula. In the beauty market, potential conversion opportunities include creams and lotions currently packaged in jars or tubes using removable non-dispensing closures, converting to lotion pumps or dispensing closures. We have developed and patented a thin sprayable dispensing system that can be inserted into magazines to replace the traditional scent strips. We have also developed a similar miniature flat sample for viscous creams as well as a small pump for use on vials for cosmetic lotions.

        In addition to introducing new dispensing applications, we believe there are significant growth opportunities in converting existing pharmaceutical delivery systems to our more convenient dispensing pump or MDI systems. Examples of opportunities in the prescription drug and consumer health care markets include ways to dispense vaccines, cold and flu treatments, hormone replacement therapies, pain medication, sleep aids and ophthalmic applications. Examples of opportunities in the beauty and personal care markets include replacing closures on sun care applications with our bag-on valve technology and replacing finger actuators on fragrance applications with bulb atomizers.

        We are committed to developing or acquiring new dispensing technologies that can lead to the development of completely new dispensing systems or can complement our existing product offerings. In 2013, we acquired a

3 /ATR

2013 Form 10-K

---

Table of Contents

non-controlling interest in a company which has developed bonding technology (BAP^TM) that provides opportunities for additional product applications requiring a liner. In 2012, we acquired Stelmi which produces elastomer primary packaging components for injectable drug delivery. This investment represents a significant opportunity for the Pharma segment to enter a new category and broaden our product portfolio and customer reach. We also manufacture decorative packaging components primarily for the high end of the beauty market. This technology includes advanced molding capabilities as well as decoration (vacuum metallization and varnishing) of plastic components.

RESEARCH AND DEVELOPMENT

 One of our competitive strengths is our commitment to innovation. Our commitment to innovation has resulted in an emphasis on research and development. Our research and development activities are directed toward developing affordable new innovative packaging delivery solutions and adapting existing products for new markets or customer requirements. Our research and development personnel are primarily located in the United States, France, Germany and Italy. In certain cases, our customers share in the research and development expenses of customer initiated projects. Occasionally, we acquire or license from third parties technologies or products that are in various stages of development. Expenditures for research and development activities, net of certain research and development credits, were $71.8 million, $65.4 million and $67.0 million in 2013, 2012 and 2011, respectively.

PATENTS AND TRADEMARKS

 We customarily seek patent and trademark protection for our products and brands. We own and currently have numerous applications pending for patents and trademarks in many regions of the world. In addition, certain of our products are produced under patent licenses granted by third parties. We believe that we possess certain technical capabilities in making our products that make it difficult for a competitor to duplicate.

TECHNOLOGY

 We have technical expertise regarding injection molding, robotics, cleanroom facilities and high-speed assembly. We also have expertise regarding the formulation and finishing of elastomer and silicone components. In addition, we offer a variety of sterilization options for elastomer components for the pharmaceutical industry. Pumps and aerosol valves require the assembly of several different plastic, metal and rubber components using high-speed equipment. When molding dispensing closures, or plastic components to be used in pump or aerosol valve products, we use advanced plastic injection molding technology, including large cavitation plastic injection molds. We are able to mold within tolerances as small as one one-thousandth of an inch and we assemble products in a high-speed, cost-effective manner. Our injection molding capabilities include recent advances such as spin-stack and cube molding which utilize high-efficiency rotating molds. We are also utilizing In-Molding Assembly Technology (IMAT) which allows us to assemble products within the molding process. We are experts in molding liquid silicone that is used in certain dispensing closures as well as rubber gasket formulation and production primarily for the prescription drug and consumer health care markets. We also have technology to decorate plastic and metal components sold primarily to the beauty and personal care markets.

MANUFACTURING AND SOURCING

 More than half of our worldwide production is located outside of the United States. In order to augment capacity and to maximize internal capacity utilization (particularly for plastic injection molding), we use subcontractors to supply certain plastic, metal and rubber components. Certain suppliers of these components have unique technical abilities that make us dependent on them, particularly for aerosol valve and pump production. The principal raw materials used in our production are plastic resins, rubber and certain metal products. We believe an adequate supply of such raw materials is available from existing and alternative sources. We attempt to offset cost increases through improving productivity and increasing selling prices over time, as allowed by market conditions or contractual commitments. Our pharmaceutical products often use resin and rubber components specifically approved by our customers. Significant delays in receiving components from these suppliers or discontinuance of an approved raw material would require us to seek alternative sources, which could result in higher costs as well as impact our ability to supply products in the short term.

SALES AND DISTRIBUTION

 Sales of products are primarily through our own sales force. To a limited extent, we also use the services of independent representatives and distributors who sell our products as independent contractors to certain smaller customers and export markets.

BACKLOG

 Our sales are primarily made pursuant to standard purchase orders for delivery of products. While most orders placed with us are ready for delivery within 120 days, we continue to experience a trend towards shorter lead times requested by our customers. Some customers place blanket orders, which extend beyond this delivery period. However, deliveries against purchase orders are subject to change, and only a small portion of the order backlog is noncancelable. The dollar amount associated with the noncancelable portion is not material. Therefore, we do not believe that backlog as of any particular date is an accurate indicator of future results.

4 /ATR

2013 Form 10-K

---

Table of Contents

CUSTOMERS

 The demand for our products is influenced by the demand for our customers' products. Demand for our customers' products may be affected by general economic conditions and liquidity, government regulations, tariffs and other trade barriers. Our customers include many of the largest beauty, personal care, pharmaceutical, home care, food and beverage marketers in the world. We have over 5,000 customers with no single customer or group of affiliated customers accounting for greater than 6% of 2013 net sales. A consolidation of our customer base has occurred and this trend is expected to continue. A concentration of customers presents opportunities for increasing sales due to the breadth of our product line, our international presence and our long-term relationships with certain customers. However, this situation also may result in pricing pressures, concentration of credit risk or a loss of volume.

INTERNATIONAL BUSINESS

 We have grown geographically by serving both large multi-national customers and local customers in developing regions. Sales in Europe for the years ended December 31, 2013, 2012 and 2011 were approximately 58%, 54% and 57%, respectively, of net sales. We manufacture the majority of units sold in Europe at facilities in the Czech Republic, England, France, Germany, Ireland, Italy, Russia, Spain and Switzerland. Other countries in which we operate include Argentina, Brazil, China, India, Indonesia, Japan, Mexico and Thailand which when aggregated represented approximately 17%, 18% and 16% of our consolidated sales for the years ended December 31, 2013, 2012 and 2011, respectively. Export sales from the United States were $143.9 million, $152.9 million and $150.4 million in 2013, 2012 and 2011, respectively. For additional financial information about geographic areas, please refer to Note 17 in the Notes to the Consolidated Financial Statements in Item 8 (which is incorporated by reference herein).

FOREIGN CURRENCY

 Because of our international presence, movements in exchange rates may have a significant impact on the translation of the financial statements of our foreign entities. Our primary foreign exchange exposure is to the Euro, but we have foreign exchange exposure to the Brazilian Real, British Pound, Swiss Franc and other South American and Asian currencies, among others. We manage our exposures to foreign exchange principally with forward exchange contracts to economically hedge recorded transactions and firm purchase and sales commitments denominated in foreign currencies. A weakening U.S. dollar relative to foreign currencies has an additive translation effect on our financial statements. Conversely, a strengthening U.S. dollar has a dilutive effect. In some cases, we sell products denominated in a currency different from the currency in which the related costs are incurred. Changes in exchange rates on such inter-country sales could materially impact our results of operations.

WORKING CAPITAL PRACTICES

 Collection and payment periods tend to be longer for our operations located outside the United States due to local business practices. We have also seen an increasing trend in pressure from certain customers to lengthen their payment terms or completely outsource their payable function. As the majority of our products are made to order, we have not needed to keep significant amounts of finished goods inventory to meet customer requirements.

EMPLOYEE AND LABOR RELATIONS

 AptarGroup has approximately 12,400 full-time employees. Of the full-time employees, approximately 7,100 are located in Europe, 3,100 are located in Asia and South America and the remaining 2,200 are located in North America. The majority of our European employees are covered by collective bargaining arrangements made at either the local or national level in their respective countries and approximately 200 of the North American employees are covered by a collective bargaining agreement. Termination of employees at certain of our international operations could be costly due to local regulations regarding severance benefits. There were no material work stoppages in 2013 and management considers our employee relations to be satisfactory.

COMPETITION

 All of the markets in which we operate are highly competitive and we continue to experience price competition in all product lines and markets. Competitors include privately and publicly held entities that range from regional to international companies. We expect the market for our products to remain competitive. We believe our competitive advantages are consistent high levels of innovation, quality and service, geographic diversity and breadth of products. Our manufacturing strength lies in the ability to mold complex plastic components and formulate and finish elastomer and silicone components in a cost-effective manner and to assemble products at high speeds. Our business is capital intensive and it is becoming more important to our customers to have global manufacturing capabilities. Both of these serve as barriers to entry for new competitors wanting to enter our business.

        While we have experienced some competition in Europe, Latin America and the United States from low cost Asian suppliers, particularly in the low-end beauty and personal care market, this has not been significant. Indirectly, some fragrance marketers are sourcing their manufacturing requirements, including filling of their product, in Asia and importing the finished product back into the United States or Europe. However, some customers who had bought dispensing packaging products from low cost Asian suppliers in the past have reverted to purchasing our dispensing products, citing the higher quality offered by our products and the logistical advantage of being closer to the customer.

5 /ATR

2013 Form 10-K

---

Table of Contents

ENVIRONMENT

 Our manufacturing operations primarily involve plastic injection molding, automated assembly processes, elastomer and silicone formulation and finishing and, to a limited degree, metal anodization and vacuum metallization of plastic components. Historically, the environmental impact of these processes has been minimal, and we believe we meet current environmental standards in all material respects. To date, our manufacturing operations have not been significantly affected by environmental laws and regulations relating to the environment.

        Recently there is increased interest and awareness from the public and our customers in sustainability or producing environmentally sustainable products and measuring carbon footprints. We are focused on becoming more energy efficient and improving our carbon footprint. We are also designing products that improve recyclability and use less material. Future regulations on environmental matters regarding recycling or sustainability policies could impact our business.

GOVERNMENT REGULATION

 Certain of our products are indirectly affected by government regulation. Demand for aerosol and pump packaging is affected by government regulations regarding the release of volatile organic compounds ("VOCs") into the atmosphere. Certain states within the United States have regulations that require the reduction in the amount of VOCs that can be released into the atmosphere and the potential exists for this type of regulation to expand worldwide. These regulations required our customers to reformulate certain aerosol and pump products, which may have affected the demand for such products. We own patents and have developed systems to function with alternative propellant and product formulations.

        Future government regulations could include medical cost containment policies. For example, reviews by various governments to determine the number of drugs, or prices thereof, that will be paid by their insurance systems could affect future sales to the pharmaceutical industry. Such regulation could adversely affect prices of and demand for our pharmaceutical products. We believe that the focus on the cost effectiveness of the use of medications as compared to surgery and hospitalization provides us with an opportunity to expand sales to the pharmaceutical market. In addition, government regulation of our customers' products could impact our sales to them of our dispensing systems.

EXECUTIVE OFFICERS

 Our executive officers as of February 28, 2014:

        There were no arrangements or understandings between any of the executive officers and any other person(s) pursuant to which such officers were elected.

6 /ATR

2013 Form 10-K

---

Table of Contents

ITEM 1A.    RISK FACTORS

 Set forth below and elsewhere in this report and in other documents we file with the Securities and Exchange Commission are risks and uncertainties that could cause our actual results to materially differ from the results contemplated by the forward-looking statements contained in this report and in other documents we file with the Securities and Exchange Commission. Additional risks and uncertainties not presently known to us, or that we currently deem immaterial, may also impair our business operations. You should carefully consider the following factors in addition to other information contained in this report on Form 10-K before purchasing any shares of our common stock.

FACTORS AFFECTING OPERATIONS OR OPERATING RESULTS

 If there is a deterioration in economic conditions in a particular region or market, our business and operating results could be materially adversely impacted.    Due to our strong balance sheet, diverse product offerings, various end-markets served, and our broad geographic presence, we are well positioned to withstand slowness in any one particular region or market. However, economic uncertainties affect businesses such as ours in a number of ways, making it difficult to accurately forecast and plan our future business activities. A tightening of credit in financial markets or other factors may lead consumers and businesses to postpone spending, which may cause our customers to cancel, decrease or delay their existing and future orders with us. In addition, financial difficulties experienced by our suppliers, customers or distributors could result in product delays, increased accounts receivable defaults and inventory or supply challenges. An interruption in supply may also impact our ability to meet customer demands. Consumer demand for our customers' products and shifting consumer preferences are unpredictable and could have a negative impact on our customers and our customers' demand for our products. A disruption in the credit markets could also restrict our access to capital.

 If our expansion initiatives are unsuccessful, our operating results and reputation may suffer.    We are expanding our operations in a number of new and existing markets and jurisdictions, including facilities expansions in France and Latin America. Expansion of our operations will continue to require a significant amount of time and attention from our senior management and capital investment. Our expansion activities present considerable challenges and risks, including the general economic and political conditions existing in new markets and jurisdictions that we enter, attracting, training and retaining qualified and talented employees, infrastructure and labor disruptions, fluctuations in currency exchange rates, the imposition of restrictions by governmental authorities, compliance with current, new and changing governmental laws and regulations and the cost of such compliance activities. We may have limited or no prior experience in certain of these new markets and there is no assurance any of our expansion efforts will be successful. If any of our expansion efforts are unsuccessful, our operating results and reputation may suffer.

 Higher raw material costs and other inputs and an inability to increase our selling prices may materially adversely affect our operating results and financial condition.    The cost of raw materials and other inputs (particularly resin, rubber, metal, anodization costs and transportation and energy costs) are volatile and susceptible to rapid and substantial changes due to factors beyond our control, such as changing economic conditions, currency fluctuations, weather conditions, political unrest and instability in energy-producing nations, and supply and demand pressures. Raw material costs may increase in the coming years and we have generally been able to increase selling prices to cover increased costs. In the future, market conditions may prevent us from passing these increased costs on to our customers through timely price increases. In addition, we may not be able to improve productivity or realize savings from our cost reduction programs sufficiently enough to offset the impact of increased raw material costs. As a result, higher raw material costs could result in declining margins and operating results.

 In difficult market conditions, our high fixed costs combined with potentially lower revenues may negatively impact our results.    Our business is characterized by high fixed costs and, notwithstanding our utilization of third-party manufacturing capacity, most of our production requirements are met by our own manufacturing facilities. In difficult environments, we are generally faced with a decline in the utilization rates of our manufacturing facilities due to decreases in product demand. During such periods, our plants do not operate at full capacity and the costs associated with this excess capacity are charged directly to cost of sales. Difficult market conditions in the future may adversely affect our utilization rates and consequently our future gross margins, and this, in turn, could have a material negative impact on our business, financial condition and results of operations.

 We face strong global competition and our market share could decline.    All of the markets in which we operate are highly competitive and we continue to experience price competition in all product lines and segments. Competitors include privately and publicly held entities. Our competitors mainly range from regional to international companies, and we also experience some local competition mainly in Asia and Latin America. Some fragrance marketers are sourcing their manufacturing requirements including filling of their product in Asia and importing the finished product back into the United States or Europe. If we are unable to compete successfully, our market share may decline, which could materially adversely affect our results of operations and financial condition.

7 /ATR

2013 Form 10-K

---

Table of Contents

 We have foreign currency translation and transaction risks that may materially adversely affect our operating results.    A significant number of our operations are located outside of the United States. Because of this, movements in exchange rates may have a significant impact on the translation of the financial statements of our foreign entities. Our primary foreign exchange exposure is to the Euro, but we have foreign exchange exposure to the British Pound, Swiss Franc, as well as Latin American and Asian currencies, among others. We manage our exposures to foreign exchange principally with forward exchange contracts to economically hedge certain transactions and firm purchase and sales commitments denominated in foreign currencies. A weakening U.S. dollar relative to foreign currencies has an additive translation effect on our financial statements. Conversely, a strengthening U.S. dollar has a dilutive translation effect. In some cases, we sell products denominated in a currency different from the currency in which the related costs are incurred. The volatility of currency exchange rates may materially affect our operating results.

 If our unionized employees were to engage in a strike or other work stoppage, our business and operating results and financial condition could be materially adversely affected.    The majority of our European employees are covered by collective bargaining arrangements made either at the local or national level in their respective countries and approximately 200 of our North American employees are covered by a collective bargaining agreement. Although we believe that our relations with our employees are satisfactory, no assurance can be given that this will continue. If disputes with our unions arise, or if our unionized workers engage in a strike or other work stoppage, we could incur higher labor costs or experience a significant disruption of operations, which could have a material adverse effect on our business, financial position and results of operations.

 If we were to incur a significant product liability claim above our current insurance coverage, our operating results and financial condition could be materially adversely affected.    Approximately 28% of our net sales are made to customers in the pharmaceutical industry. If our devices fail to operate as intended, medication prescribed for patients may be under administered, or may be over administered. The failure of our devices to operate as intended may result in a product liability claim against us. We believe we maintain adequate levels of product liability insurance coverage. A product liability claim or claims in our Pharma segment or our other segments in excess of our insurance coverage may materially adversely affect our business, financial position and results of operations.

 The success or failure of our customers' products, particularly in the pharmaceutical market, may materially affect our operating results and financial condition.    In the pharmaceutical market, the proprietary nature of our customers' products and the success or failure of their products in the market using our dispensing systems may have a material impact on our operating results and financial condition. We may potentially work for years on modifying our dispensing device to work in conjunction with a customer's drug formulation. If the customer's pharmaceutical product is not approved by regulatory bodies or it is not successful on the market, the associated costs may not be recovered.

 Single sourced materials and manufacturing sites could risk our ability to deliver product.    The Company sources certain materials, especially some resins and rubber components for our pharmaceutical segment, from a single source. Any disruption in the supply of these materials could adversely impact our ability to deliver product to our customers. Similarly, we have certain components and / or products that are manufactured at a single location or from a single machine or mold. Any disruption to the manufacturing process could also impact our ability to deliver product to our customers.

 We have approximately $359 million in recorded goodwill and changes in future business conditions could cause this asset to become impaired, requiring write-downs that would reduce our operating income.    We evaluate the recoverability of goodwill amounts annually, or more frequently when evidence of potential impairment exists. The impairment test is based on several factors requiring judgment. A decrease in expected reporting unit cash flows or changes in market conditions may indicate potential impairment of recorded goodwill and, as a result, our operating results could be materially adversely affected. See "Critical Accounting Estimates" in Part II, Item 7 (which is incorporated by reference herein).

 Government regulation on environmental matters regarding recycling or environmental sustainability policies could impact our business.    Future government regulations mandating the use or limitations of certain materials could impact our manufacturing processes or the technologies we use forcing us to reinvest in alternative materials or assets used in the production of our products.

FACTORS AFFECTING APTARGROUP STOCK

 Ownership by Certain Significant Shareholders.    Currently, Aptar has five shareholders who each own between 5% and 10% of our outstanding common stock. If one of these significant shareholders decides to sell significant volumes of our stock, this could put downward pressure on the price of the stock.

 Certain Anti-takeover Factors.    Certain provisions of our Certificate of Incorporation and Bylaws may inhibit changes in control of AptarGroup not approved by the Board of Directors. These provisions include (i) special voting requirements for business combinations, (ii) a classified board of directors, (iii) a prohibition on stockholder action through written consents, (iv) a requirement that special meetings of stockholders be called only by the board of directors, (v) advance notice

8 /ATR

2013 Form 10-K

---

Table of Contents

requirements for stockholder proposals and nominations, (vi) limitations on the ability of stockholders to amend, alter or repeal our bylaws and (vii) provisions that require the vote of 70% of the whole Board of Directors in order to take certain actions.

ITEM 1B.    UNRESOLVED STAFF COMMENTS

 The Company has no unresolved comments from the SEC.

ITEM 2.    PROPERTIES

 We lease or own our principal offices and manufacturing facilities. None of the owned principal properties is subject to a lien or other encumbrance material to our operations. We believe that existing operating leases will be renegotiated as they expire, will be acquired through purchase options or that suitable alternative properties will be leased on acceptable terms. We consider the condition and extent of utilization of our manufacturing facilities and other properties to be generally good, and the capacity of our plants to be adequate for the needs of our business. The locations of our principal manufacturing facilities, by country, are set forth below:

        We also have sales personnel in Canada and Japan. Our corporate office is located in Crystal Lake, Illinois.

9 /ATR

2013 Form 10-K

---

Table of Contents

ITEM 3.    LEGAL PROCEEDINGS

 Claims in the product liability and patent infringement areas, even if without merit, could result in the significant expenditure of our financial and managerial resources. It is possible that future results of operations or cash flows for any particular quarterly or annual period could be materially affected by an unfavorable resolution of such a claim.

ITEM 4.    MINE SAFETY DISCLOSURES

 Not applicable.

PART II

ITEM 5.    MARKET FOR REGISTRANT'S COMMON EQUITY, RELATED STOCKHOLDER MATTERS AND ISSUER PURCHASES OF EQUITY SECURITIES

MARKET FOR REGISTRANT'S COMMON EQUITY

 Information regarding market prices of our Common Stock and dividends declared may be found in Note 20 to the Consolidated Financial Statements in Item 8 (which is incorporated by reference herein). Our Common Stock is traded on the New York Stock Exchange under the symbol ATR. As of February 17, 2014, there were approximately 300 registered holders of record.

RECENT SALES OF UNREGISTERED SECURITIES

 The employees of AptarGroup S.A.S. and Aptar France S.A.S., our subsidiaries, are eligible to participate in the FCP Aptar Savings Plan (the "Plan"). All eligible participants are located outside of the United States. An independent agent purchases shares of Common Stock available under the Plan for cash on the open market and we do not issue shares. We do not receive any proceeds from the purchase of Common Stock under the Plan. The agent under the Plan is Banque Nationale de Paris Paribas Fund Services. No underwriters are used under the Plan. All shares are sold in reliance upon the exemption from registration under the Securities Act of 1933 provided by Regulation S promulgated under that Act. During the quarter ended December 31, 2013, the Plan purchased 4,410 shares of our common stock on behalf of the participants at an average price of $65.36 per share, for an aggregate amount of $288 thousand, and sold 1,250 shares of our Common Stock on behalf of the participants at an average price of $65.92 per share, for an aggregate amount of $82 thousand. At December 31, 2013, the Plan owned 38,388 shares of our Common Stock.

ISSUER PURCHASES OF EQUITY SECURITIES

 The following table summarizes the Company's purchases of its securities for the quarter ended December 31, 2013:

        The Company announced the existing repurchase program, authorizing the Company to repurchase up to four million shares of its outstanding common stock on July 18, 2013, increasing the total amount of shares authorized for repurchase as of such date to 5,172,691. There is no expiration date for this repurchase program.

10 /ATR

2013 Form 10-K

---

Table of Contents

SHARE PERFORMANCE

 The following graph shows a five year comparison of the cumulative total stockholder return on AptarGroup's common stock as compared to the cumulative total return of the Standard & Poor's 500 Composite Stock Price Index and to an index of peer group companies we selected. The companies included in the peer group are: AEP Industries Inc., Bemis Company, Inc., Boise Inc., Buckeye Technologies Inc., Crown Holdings, Inc., Graphic Packaging Holding Company, Greif Inc., MeadWestvaco Corporation, Owen's-Illinois, Inc., Packaging Corporation of America, Rock-Tenn Company, Sealed Air Corporation, Silgan Holdings, Inc., Sonoco Products Company, and West Pharmaceutical Services Inc.

Comparison of 5 Year Cumulative Stockholder Returns

        The graph and other information furnished in the section titled "Share Performance" under this Part II, Item 5 of this Form 10-K shall not be deemed to be "soliciting" material or to be "filed" with the Securities and Exchange Commission or subject to Regulation 14A or 14C, or to the liabilities of Section 18 of the Securities Exchange Act of 1934, as amended.

11 /ATR

2013 Form 10-K

---

Table of Contents

ITEM 6.    SELECTED FINANCIAL DATA

FIVE YEAR SUMMARY OF SELECTED FINANCIAL DATA

12 /ATR

2013 Form 10-K

---

Table of Contents

ITEM 7.    MANAGEMENT'S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS
(In thousands, expect per share amounts or otherwise indicated)

 The objective of the following Management's Discussion and Analysis of Consolidated Results of Operations and Financial Condition ("MD&A") is to help the reader understand the financial performance of AptarGroup, Inc. MD&A is presented in eight sections: Overview, Results of Operations, Liquidity and Capital Resources, Off-Balance Sheet Arrangements, Overview of Contractual Obligations, Recently Issued Accounting Pronouncements, Critical Accounting Estimates, Operations Outlook and Forward-Looking Statements. MD&A should be read in conjunction with our consolidated financial statements and accompanying Notes to Consolidated Financial Statements contained elsewhere in this Annual Report on Form 10-K.

        In MD&A, "we," "our," "us," "AptarGroup," "AptarGroup, Inc." and "the Company" refer to AptarGroup, Inc. and its subsidiaries.

OVERVIEW

GENERAL

 We are a leading global solution provider of a broad range of innovative packaging delivery solutions primarily for the beauty, personal care, home care, prescription drug, consumer health care, injectables, food and beverage markets. Our creative packaging solutions enhance the convenience, safety and security of consumers around the globe and allow our customers to differentiate their products in the market.

        Our diverse product offering and broad global reach drove core sales growth in 2013. In spite of difficult conditions in certain markets, we were able to grow core sales by 4% over the prior year. Even though we began the year slowly, we saw improvement in year over year sales growth in the middle part of the year and ended with a strong fourth quarter. Our Pharma segment's strong results were driven by increased sales across each market served by this segment. Also, our Food + Beverage segment reported increased earnings while continued softness in the U.S., currency effects, and Latin American facility start-up costs had a negative impact on the results of our Beauty + Home segment. On a geographic basis excluding currency effects and the Aptar Stelmi acquisition, strong European sales growth was able to more than offset the softness in the U.S. We also continued to grow at a strong rate in Latin America and Asia.

        We define core sales as net sales excluding acquisitions and changes in foreign currency rates. Core sales is a non-GAAP financial measure. We present this measure as supplemental information to help our investors better understand the trends in our business results over time. Our management uses core sales to evaluate our business on a consistent basis. A reconciliation of core sales growth to net sales growth, the most comparable GAAP measure, can be found on page 14.

2013 HIGHLIGHTS

•

Core sales increased 4% and net sales increased 8%.

•

Sales growth across all three business segments drove results.

•

We acquired a 20% non-controlling interest in Bapco Closures Holding Limited for approximately $5.2 million. In addition to this equity stake, we secured an exclusive global license related to innovative closures sealing technology that provides package integrity and tamper evidence.

•

We have substantially completed the European restructuring plan at the end of 2013 with total costs of approximately $19.5 million. Savings from this plan are expected to be in the range of $10 million to $12 million on an annualized basis.

•

French tax regulations enacted at the end of December negatively impacted earnings by $0.10 per share.

•

We spent approximately $119 million to repurchase 2.0 million shares of our common stock.

•

We made dividend payments to our shareholders totaling approximately $66 million.

13 /ATR

2013 Form 10-K

---

Table of Contents

RESULTS OF OPERATIONS

 The following table sets forth the consolidated statements of income and the related percentages of net sales for the periods indicated:

NET SALES

 We reported net sales of $2.5 billion for 2013, 8% above 2012 reported net sales of $2.3 billion. Stelmi, which was acquired in July of 2012, reported sales for the first six months of 2013 of $74.0 million which contributed 3% to the reported increase in 2013 net sales. The negative translation effect from weakening Latin American and Asian currencies was offset by the stronger Euro compared to prior year. This resulted in a 1% positive impact from changes in exchange rates on our reported sales growth. Although all three operating segments saw increases in 2013, the 4% core sales growth was mainly driven by the strong results of our Food + Beverage and Pharma segments.

        In 2012, reported net sales of $2.3 billion were basically unchanged compared to $2.3 billion recorded in 2011. Stelmi sales contributed $56.8 million and represented a positive impact of 2% on our reported sales growth. The average U.S. dollar exchange rate strengthened relative to the Euro and other foreign currencies, such as the Brazilian Real and Swiss Franc, in 2012 compared to 2011, and as a result, changes in exchange rates had a negative impact of 5% on our reported sales growth. The 3% core sales growth was due to increased demand for our innovative dispensing systems across each of our business segments.

        For further discussion on net sales by reporting segment, please refer to the segment analysis of net sales and operating income on the following pages.

        The following table sets forth, for the periods indicated, net sales by geographic location:

COST OF SALES (EXCLUSIVE OF DEPRECIATION SHOWN BELOW)

 Our cost of sales as a percentage of net sales decreased in 2013 to 67.8% compared to 68.2% in 2012.

The following factors positively impacted our cost of sales percentage in 2013:

 Mix of Products Sold.    Excluding acquisitions and foreign currency, our Pharma segment sales represented a higher percentage of our overall sales. This positively impacts our cost of sales percentage as margins on our pharmaceutical products typically are higher than the overall Company average.

14 /ATR

2013 Form 10-K

---

Table of Contents

 Stelmi Acquisition.    In 2012, approximately $3.8 million of inventory fair value adjustments related to the acquisition of Stelmi negatively impacted our cost of sales percentage. However, Stelmi margins are also higher than our Company average margins. Therefore, the strong sales volumes for a full year in 2013 also have a positive impact on the 2013 cost of sales percentage.

The following factors negatively impacted our cost of sales percentage in 2013:

 Weakening of the U.S. Dollar.    We are a net importer from Europe into the U.S. of products produced in Europe with costs denominated in Euros. As a result, when the U.S. dollar or other currencies weaken against the Euro, products produced in Europe (with costs denominated in Euros), and sold in currencies that are weaker compared to the Euro, have a negative impact on cost of sales as a percentage of net sales.

 U.S. Overhead Utilization.    Soft demand in certain product lines, along with costs related to our enterprise system rollouts, negatively impacted our North American cost of sales, mainly in our Beauty + Home segment.

Our cost of sales as a percentage of net sales increased in 2012 to 68.2% compared to 67.1% in 2011. Excluding Stelmi, 2012 cost of sales represented 68.1% of net sales:

The following factors negatively impacted our cost of sales percentage in 2012:

 Increased Raw Material Costs.    Raw material costs, primarily the cost of plastic resin, increased in 2012 compared to 2011. While the majority of resin cost increases are passed along to our customers in our selling prices, we typically experience a lag in the timing of passing on these cost increases. Other material costs also increased such as the cost of aluminum, steel and rubber.

 Mix of Products Sold.    Excluding acquisitions and foreign currency, our Pharma segment sales represented a slightly lower percentage of our overall sales. This negatively impacts our cost of sales percentage as margins on our pharmaceutical products typically are higher than the overall company average.

 Lincolnton Start-up Costs.    Start-up activities associated with our new facility in Lincolnton, North Carolina have led to under-absorption of costs. For 2012, we recognized $3.5 million of under-absorption in our results.

The following factor positively impacted our cost of sales percentage in 2012:

 Strengthening of the U.S. Dollar.    We are a net importer from Europe into the U.S. of products produced in Europe with costs denominated in Euros. As a result, when the U.S. dollar or other currencies strengthen against the Euro, products produced in Europe (with costs denominated in Euros) and sold in currencies that are stronger compared to the Euro, have a positive impact on cost of sales as a percentage of net sales.

SELLING, RESEARCH & DEVELOPMENT AND ADMINISTRATIVE

 Our Selling, Research & Development and Administrative expenses ("SG&A") increased approximately 7% or $23.1 million in 2013 compared to the same period a year ago. Excluding changes in foreign currency rates, SG&A increased by approximately $20.3 million compared to the same period a year ago. Part of the increase is related to the Stelmi acquisition. In the first half of 2013, the Stelmi Group contributed approximately $9.9 million to our SG&A expense totals, while in 2012, we recorded $5.9 million of professional fees related to the acquisition. Also contributing to the increase were additional personnel costs and professional fees related to our North American enterprise system rollouts along with facility start-up costs in Latin America. For 2013, SG&A as a percentage of net sales decreased to 14.4% compared to 14.7% of net sales in the same period of the prior year due primarily to the increase in sales noted above.

        In 2012, our SG&A decreased approximately 2% or $6.0 million. Excluding changes in foreign currency rates, SG&A increased by approximately $11.8 million for the year. Increases due to Stelmi operational costs of $7.7 million and transaction costs of $5.9 million were offset by lower professional fees as higher legal costs were incurred in 2011. For 2012, SG&A as a percentage of net sales decreased to 14.7% compared to 14.9% of net sales in the same period of the prior year.

DEPRECIATION AND AMORTIZATION

 Depreciation and amortization expense increased approximately 9% or $12.9 million in 2013. Excluding changes in foreign currency rates, depreciation and amortization increased by approximately $11.1 million compared to the same period a year ago. Incremental Stelmi depreciation and amortization for the first six months of 2013 represented $4.8 million of this increase while the accelerated depreciation on certain corporate assets and the European restructuring plan represented $4.2 million. Additional investments in our business make up the remaining increase. Excluding acquisitions, depreciation and amortization as a percentage of net sales increased slightly to 6.0% compared to 5.9% for the same period a year ago mainly due to the increase in expenses noted above.

        In 2012, depreciation and amortization expense increased approximately 2% or $2.8 million. Excluding changes in foreign currency rates, depreciation and amortization increased $10.0 million. Stelmi represented $5.6 million and accelerated depreciation related to our European restructuring plan represented $1.6 million of the increase in 2012. The remaining increase is related to the additional investments in our new facilities in Lincolnton, North Carolina and Mumbai, India, and general capital investment increases across all three business segments. Depreciation and amortization expense increased to 5.9% of net sales in 2012 compared to 5.7% in 2011 primarily due to the items mentioned above.

15 /ATR

2013 Form 10-K

---

Table of Contents

RESTRUCTURING INITIATIVES

 On November 1, 2012, the Company announced a plan to optimize certain capacity in Europe. Due to increased production efficiencies and to better position the Company for future growth in Europe, AptarGroup transferred and consolidated production capacity involving twelve facilities. Under the plan, two facilities, one in Italy and one in Switzerland, closed which impacted approximately 170 employees. During 2013, we recognized $11.8 million of restructuring expenses along with $2.7 million accelerated depreciation of assets mentioned above. The plan was substantially completed at the end of 2013 with total costs of approximately $19.5 million. Savings from the plan are expected to be in the range of $10 million to $12 million on an annualized basis.

OPERATING INCOME

 Operating income increased approximately $25.7 million or 10% to $284.6 million in 2013. Excluding acquisitions and restructuring costs, operating income increased by $11.3 million. The increase is mainly related to the sales growth across all three segments as discussed above. In 2013, the positive impact of Stelmi, which had operating income of $14.4 million in the first six months of 2013, was offset by the negative impact related to restructuring plan charges of $14.6 million. The 2012 results were negatively impacted by restructuring plan charges of $4.9 million, $5.9 million of Stelmi acquisition costs and $3.8 million related to Stelmi inventory fair value adjustments as mentioned above. Reported operating income, as a percentage of sales, increased slightly to 11.3% in 2013 compared to 11.1% in 2012 mainly due to the increase in sales discussed above.

        In 2012, operating income decreased approximately $28.2 million or 10% to $258.9 million. Excluding changes in foreign currency rates, operating income decreased by approximately $10.8 million in 2012 compared to 2011. Stelmi contributed a $4.6 million operating loss in 2012 and costs related to our European restructuring plan contributed $4.9 million. Excluding Stelmi, restructuring costs and the changes in foreign currency rates, operating income decreased by approximately $1.4 million in 2012 compared to the same period a year ago due to the higher cost of sales percentage and the incremental depreciation related to our capital investments. Operating income as a percentage of sales decreased to 11.1% in 2012 compared to 12.3% in 2011 also due to the higher percentage of cost of sales and depreciation cost compared to prior year as discussed above.

NET OTHER EXPENSES

 Net other expenses in 2013 increased to $20.2 million compared to $17.5 million in 2012. This increase is mainly due to $1.6 million higher interest expense and increased losses in the fourth quarter on foreign currency transactions mainly due to the significant devaluation of the Argentine Peso, Brazilian Real and Indian Rupee when compared to the U.S. Dollar. We continue to hedge parts of this exposure when we believe it makes sense from a cost standpoint.

        In 2012, net other expenses increased to $17.5 million compared to $12.2 million in 2011. This increase is mainly due to $2.7 million of lower interest income and $1.7 million higher interest expense related to converting part of our short-term borrowing to long-term in order to lock in the historically low interest rates.

EFFECTIVE TAX RATE

 The reported effective tax rate on net income for 2013 and 2012 was 35.0% and 32.7%, respectively. The higher tax rate for 2013 is primarily the result of tax regulation changes enacted in France, offset partially by the tax benefits resulting from an Italian tax law change as well as the expected use of a Brazilian net operating loss.

        The reported effective tax rate on net income for 2012 and 2011 was 32.7% and 33.2%, respectively. The lower tax rate for 2012 is primarily the mix of earnings and lower tax expense associated with earnings repatriated to the U.S. during 2012. These benefits were partially offset by tax increases resulting from law changes enacted in 2012 in France.

NET INCOME ATTRIBUTABLE TO APTARGROUP, INC.

 We reported net income of $172.0 million in 2013 compared to $162.6 million reported in 2012 and $183.7 million reported in 2011.

BEAUTY + HOME SEGMENT

16 /ATR

2013 Form 10-K

---

Table of Contents

Net sales increased approximately 2% in 2013 to $1.49 billion compared to $1.45 billion in 2012. Changes in foreign currency rates did not have a material impact on reported sales for 2013. Sales of our products, excluding foreign currency changes, to the beauty market increased approximately 2% while sales to the personal care market increased approximately 4% in 2013 compared to 2012. Softer sun care sales due to cooler weather conditions were offset by strong sales growth in Asia and Latin America. Sales of our home care products, excluding foreign currency changes, decreased approximately 4% mainly due to exiting certain unprofitable businesses in Europe. Geographically, increases in Europe, Asia and Latin America offset the softness in North America. Customer tooling sales, excluding foreign currency changes, decreased in 2013 to $38.6 million compared to $42.8 million in the prior year.

        In 2012, net sales decreased approximately 4% to $1.45 billion compared to $1.52 billion in 2011. The strengthening U.S. dollar compared to the Euro negatively impacted sales by 6%. Excluding changes in exchange rates, sales increased 2% from the prior year. Sales of our products, excluding foreign currency changes, to the beauty market increased approximately 1% while sales to the personal care market increased approximately 3% in 2012 compared to 2011 mainly due to sales growth in Asia and Latin America. Sales of our home care products, excluding foreign currency changes, decreased approximately 5% due to lower tooling sales compared to the prior year.

        Segment income for 2013 decreased approximately 12% to $109.3 million from $123.5 million reported in 2012. Increased earnings from the strong sales in Europe, Asia and Latin America were not able to offset the higher labor costs and operational inefficiencies brought on by softness in the North American region and facility start-up costs in Brazil and Columbia. Additional personnel costs and professional fees related to our North American enterprise system rollouts also negatively impacted segment income in 2013.

        In 2012, segment income decreased approximately 6% to $123.5 million from $130.8 million reported in 2011. The decrease in segment income in 2012 compared to 2011 was primarily due to foreign currency changes and lower sales volumes in Europe. Increased earnings related to the strong sales growth in Asia and Latin America helped to offset some of this decrease.

PHARMA SEGMENT

Net sales of our products to the Pharma segment increased 20% in 2013 to $708.8 million compared to $588.7 million in 2012. Stelmi sales were $74.0 million during the first half of 2013 and represented 12% of the increase. Foreign currency changes had a positive impact of 2% on total segment sales. Excluding acquisitions and changes in exchange rates, sales increased 6% in 2013 compared to the prior year. Excluding acquisitions and foreign currency rate changes, sales of our products to the prescription drug and consumer health care markets increased 2% and 11%, respectively, in 2013 compared to the same period in the prior year. Decreases in the first quarter related to destocking of inventory by our customers serving the generic allergy market, especially in North America, and softness in the consumer health care market in Europe were more than offset by the increase in sales during the last nine months of the year. We also increased second half injectables sales during 2013 compared to 2012 due to strong volumes and selective pricing increases. Customer tooling sales, excluding foreign currency changes, also increased in 2013 to $22.0 million compared to $18.6 million in the prior year.

        In 2012, sales of our products to the Pharma segment increased 6% to $588.7 million compared to $553.9 million in 2011. Stelmi sales were $56.8 million and represented 10% of the increase. The strengthening U.S. dollar compared to the Euro negatively impacted sales by 5%. Excluding acquisitions and changes in exchange rates, sales increased 1% in 2012 compared to the same period of the prior year. Sales of our products, excluding acquisitions and foreign currency changes, to the prescription drug market increased 3% while sales to the consumer health care market decreased 2%. The growth in sales to the prescription drug market is primarily due to an increase in sales of our nasal pumps to the allergy/rhinitis market. The decrease in sales of our products to the consumer health care market is due primarily to slowing sales of our customers in Eastern Europe and Russia and also 2011 was an all-time record for sales of our products to the consumer health care market.

        Segment income increased 34% to $189.7 million in 2013 compared to $141.9 million in 2012. Stelmi segment income was $14.5 million in the first six months of 2013. We also reported the $5.9 million of acquisition fees and $3.8 million of fair value adjustments related to Stelmi during 2012. Excluding Stelmi and the related acquisition fees, segment income increased $23.6 million in 2013 compared to the same period in the prior year. This increase is attributed to the higher sales in each of the markets we serve by this segment along with improved overhead absorption at our Pharma operating facilities.

        In 2012, segment income decreased 14% to $141.9 million compared to $164.4 million in 2011. This decrease is due to Stelmi fair value and other acquisition adjustments along with Stelmi transaction costs of $5.9 million and the negative impact

17 /ATR

2013 Form 10-K

---

Table of Contents

of changes in exchange rates. These expenses are offset somewhat by the increased profits from higher prescription drug sales during 2012.

FOOD + BEVERAGE SEGMENT

Net sales of our products to the Food + Beverage segment increased by approximately 12% in 2013 to $323.1 million compared to $288.4 million in 2012. Excluding changes in foreign currency rates, sales increased 11%. Sales of our products, excluding foreign currency changes, to the food market increased 10% and sales of our products to the beverage market increased approximately 13% in 2013 compared to the same period in the prior year. The sales increase to the food market is driven by strong product sales to the condiment, dairy and infant formula markets along with tooling sales, which increased $2.2 million over 2012. The increase in sales to the beverage market is mainly due to increased product sales globally, especially in Asia for the functional bottled water market.

        In 2012, net sales to the Food + Beverage segment increased by approximately 8% to $288.4 million compared to $266.9 million in 2011. The strengthening U.S. dollar compared to the Euro negatively impacted sales by approximately 3%. Sales, excluding changes in foreign currency rates, increased 11%. Sales excluding foreign currency changes to the food market were flat while the beverage markets increased approximately 32%. Demand for our beverage dispensing closures increased from 2011 due to growth of functional drinks in Asia as well as growth of water flavoring products and new juice projects in North America.

        Segment income increased 16% to $35.2 million in 2013 compared to $30.4 million in 2012. Strong growth in product sales along with improved manufacturing productivity and cost absorption contributed to the improvements in 2013 compared to the same period in the prior year.

        In 2012, segment income increased 9% to $30.4 million compared to $27.8 million in 2011. Increased volumes and better product mix helped to offset increases in selling, research and development, and administrative costs of approximately $2.1 million and Lincolnton start-up costs of approximately $3.5 million.

CORPORATE & OTHER

 Certain costs that are not allocated to our three operating business segments are classified as "Corporate & Other," which is presented separately in Note 17 of the Notes to the Condensed Consolidated Financial Statements. Corporate & Other primarily includes certain corporate compensation, professional fees, certain information system costs and LIFO inventory adjustments.

        Corporate & Other expense in 2013 increased to $38.0 million compared to $33.8 million in 2012. The increase is mainly due to a $1.5 million adjustment for accelerated depreciation on certain corporate assets and increased realized foreign currency translation losses due to the devaluation of certain currencies relative to the U.S. Dollar as discussed above.

        In 2012, Corporate & Other expense decreased to $33.8 million compared to $36.6 million in 2011. Corporate & Other includes a LIFO adjustment as the segments report on a FIFO basis for consistency. $1.4 million of the 2012 decrease is due to a decrease in our LIFO adjustment compared to the prior year.

LIQUIDITY AND CAPITAL RESOURCES

 Our primary sources of liquidity are cash flows provided by our operations and our revolving credit facility. In 2013, our operations provided cash flows that totaled $285.4 million compared to $313.9 million in 2012 and $261.0 million in 2011. The decrease in cash flow from operations in 2013 relates to an increase in working capital needs in 2013 compared to 2012 mainly due to higher sales levels. Comparing 2012 to 2011, the increase in cash flow from operations relates mainly to a decrease in working capital in 2012 from 2011 levels.

        We used $157.1 million in cash for investing activities during 2013, compared to $359.5 million during 2012 and $195.8 million in 2011. This decrease in cash used for investing activities in 2013 is primarily due a decrease in capital expenditures of approximately $23 million as well as the Stelmi acquisition in July of 2012 which utilized $188 million in cash. Comparing 2012 to 2011, the increase in cash used for investing activities is primarily due to the Stelmi acquisition in July of 2012 which resulted in approximately $173 million more cash being spent for acquisitions in 2012 compared to 2011. In 2011, we purchased an injection molding operation in India, and a non-controlling interest in a medical device company in the U.K. We estimate that we will spend approximately $190 million (assuming current exchange rates) on capital expenditures in 2014.

18 /ATR

2013 Form 10-K

---

Table of Contents

        Our net cash used for financing activities in 2013 was $67.1 million compared to $99.4 million in 2012 and $28.5 million in 2011. In 2013, the decrease in cash used for financing activities was primarily due to an increase in our borrowings which was used in part to fund a $39.0 million increase in share repurchases. Comparing 2012 to 2011, the increase in cash used for financing activities was primarily due to reduced borrowings in 2012.

        Cash and equivalents increased $80.1 million to $309.9 million at the end of 2013 from $229.8 million at the end of 2012. Total short and long-term interest bearing debt increased to $494.6 million at the end of 2013 from $427.5 million at the end of 2012. The ratio of our Net Debt (interest bearing debt less cash and cash equivalents) to Net Capital (Stockholders' Equity plus Net Debt) decreased to 11.1% compared to 12.5% as of December 31, 2012.

        On January 31, 2012, we entered into a revolving credit facility that provides for unsecured financing of up to $300 million. Each borrowing under this credit facility will bear interest at rates based on LIBOR, prime rates or other similar rates, in each case plus an applicable margin. A facility fee on the total amount of the facility is also payable quarterly, regardless of usage. The applicable margins for borrowings under the new credit facility and the facility fee percentage may change from time to time depending on changes in AptarGroup's consolidated leverage ratio. On January 31, 2013, we amended the revolving credit facility to, among other things, add a swingline loan sub-facility and extend the maturity date for the revolving credit facility by one year, to January 31, 2018. On January 31, 2014, we amended the revolving credit facility to, among other things, increase the amount of permitted receivables transactions from $100 to $150 million, reduce the cost of committed funds by 12.5 basis points and uncommitted funds by 2.5 basis points, and extend the maturity date of the revolving credit facility by one year, to January 31, 2019. The outstanding balance under the credit facility was $110 million at December 31, 2013 and is reported as notes payable in the current liabilities section of the Consolidated Balance Sheets. We incurred approximately $1.0 million in interest and fees related to this credit facility during 2013.

        Our revolving credit facility and certain long-term obligations require us to satisfy certain financial and other covenants including:

        Based upon the above debt to total capital ratio covenant we would have the ability to borrow approximately an additional $1.3 billion before the 55% requirement was exceeded.

        Our foreign operations have historically met cash requirements with the use of internally generated cash or borrowings. These foreign subsidiaries have financing arrangements with several foreign banks to fund operations located outside the U.S., but all these lines are uncommitted. Cash generated by foreign operations has generally been reinvested locally. The majority of our $309.9 million in cash and equivalents is located outside of the U.S. We manage our global cash requirements considering (i) available funds among the many subsidiaries through which we conduct business, (ii) the geographic location of our liquidity needs, and (iii) the cost to access international cash balances. The repatriation of non-U.S. cash balances from certain subsidiaries could have adverse tax consequences as we may be required to pay and record income tax expense on those funds. Historically, the tax consequences associated with repatriating current year earnings to the U.S. has been between 10% and 14% of the repatriated amount. We would not expect future impacts to be materially different.

        We believe we are in a strong financial position and have the financial resources to meet our business requirements in the foreseeable future. We have historically used cash flow from operations as our primary source of liquidity. Our primary uses of liquidity are to invest in equipment and facilities that are necessary to support our growth and to make acquisitions that will contribute to the achievement of our strategic objectives. Other uses of liquidity include paying dividends to shareholders and repurchasing shares of our common stock. In the event that customer demand would decrease significantly for a prolonged period of time and negatively impact cash flow from operations, we would have the ability to restrict and significantly reduce capital expenditure levels, as well as evaluate our acquisition strategy and dividend and share repurchase programs. A prolonged and significant reduction in capital expenditure levels could increase future repairs and maintenance costs as well as have a negative impact on operating margins if we were unable to invest in new innovative products.

OFF-BALANCE SHEET ARRANGEMENTS

 We lease certain warehouse, plant and office facilities as well as certain equipment under noncancelable operating leases expiring at various dates through the year 2027. Most of the operating leases contain renewal options and certain equipment leases include options to purchase during or at the end of the lease term. Other than operating lease obligations, we do not have any off-balance sheet arrangements. See the following section "Overview of Contractual Obligations" for future payments relating to operating leases.

19 /ATR

2013 Form 10-K

---

Table of Contents

OVERVIEW OF CONTRACTUAL OBLIGATIONS

 Below is a table of our outstanding contractual obligations and future payments as of December 31, 2013:

RECENTLY ISSUED ACCOUNTING PRONOUNCEMENTS

 In July 2013, the FASB issued guidance on the presentation of an unrecognized tax benefit when a net operating loss carryforward, a similar tax loss, or a tax credit carryforward exists. This standard requires an entity to present an unrecognized tax benefit, or a portion of an unrecognized tax benefit, in the financial statements as a reduction to a deferred tax asset for a net operating loss carryforward, a similar tax loss, or a tax credit carryforward. The guidance will be effective for the Company's fiscal years beginning after December 15, 2013. As this is already our reporting treatment, this standard does not impact our current year financial statements.

        In March 2013, the FASB issued guidance which permits an entity to release cumulative translation adjustments into net income when a reporting entity (parent) ceases to have a controlling financial interest in a subsidiary or group of assets that is a business within a foreign entity. Accordingly, the cumulative translation adjustment should be released into net income only if the sale or transfer results in the complete or substantially complete liquidation of the foreign entity in which the subsidiary or group of assets had resided, or, if a controlling financial interest is no longer held. The guidance will be effective for the Company's fiscal years beginning after December 15, 2013; however, early adoption is permitted. This standard does not impact our current year financial statements.

        Other accounting standards that have been issued by the FASB or other standards-setting bodies that do not require adoption until a future date are not expected to have a material impact on our consolidated financial statements upon adoption.

CRITICAL ACCOUNTING ESTIMATES

 The preparation of the financial statements requires us to make estimates and judgments that affect the reported amounts of assets, liabilities, revenues and expenses, and related disclosure of contingent assets and liabilities. We continually evaluate our estimates, including those related to bad debts, inventories, intangible assets, income taxes, pensions and contingencies. We base our estimates on historical experience and on a variety of other assumptions believed to be reasonable in order to make judgments about the carrying values of assets and liabilities. Actual results may differ from these estimates under different assumptions or conditions. We believe the following critical accounting policies affect our more

20 /ATR

2013 Form 10-K

---

Table of Contents

significant judgments and estimates used in preparation of our Consolidated Financial Statements. Management has discussed the development and selection of these critical accounting estimates with the audit committee of our Board of Directors and the audit committee has reviewed our disclosure relating to it in this Management's Discussion and Analysis of Consolidated Results of Operations and Financial Condition ("MD&A").

IMPAIRMENT OF GOODWILL

 In accordance with current accounting standards, goodwill has an indefinite life and is not amortized. We evaluate our goodwill for impairment at the reporting unit level on an annual basis, or whenever indicators of impairment exist. We have determined that our business segments represent our reporting units except for Injectables which, based on our review, qualifies as a separate reporting unit for goodwill impairment testing. As of December 31, 2013, we have $358.9 million of goodwill, which is allocated as follows: $39.0 million is allocated to the Pharma reporting unit, $121.0 million is allocated to the Injectables reporting unit, $181.0 million is allocated to the Beauty + Home reporting unit and $17.9 million is allocated to the Food + Beverage reporting unit.

        We believe that the accounting estimate related to determining the fair value of our reporting units is a critical accounting estimate because: (1) it is highly susceptible to change from period to period because it requires Company management to make assumptions about the future cash flows for each reporting unit over several years in the future, and (2) the impact that recognizing an impairment would have on the assets reported on our balance sheet as well as our results of operations could be material. Management's assumptions about future cash flows for the reporting units require significant judgment and actual cash flows in the future may differ significantly from those forecasted today. The estimate for future cash flows and its impact on the impairment testing of goodwill is a critical accounting estimate for all the segments of our business.

        Effective January 1, 2013, we adopted a standard that provides an entity the option to first assess qualitative factors to determine whether the existence of events or circumstances leads to a determination that it is more likely than not (greater than 50 percent chance) that the fair value of a reporting unit is less than its carrying amount. Such qualitative factors may include the following: macroeconomic conditions; industry and market considerations; cost factors; overall financial performance; and other relevant entity-specific events. In the absence of sufficient qualitative factors, goodwill impairment is determined utilizing a two-step process. If it is determined that the fair value of a reporting unit is below its carrying amount, where necessary, goodwill will be impaired at that time.

        We performed our annual goodwill impairment assessment as of December 31, 2013 for each of our reporting units. Based on our qualitative assessment of macroeconomic, industry, and market events and circumstances as well as the overall financial performance of the reporting units, we determined it was more likely than not that the fair value of goodwill attributed to these reporting units was greater than its carrying amount. As such, the annual two-step impairment test was deemed not necessary to be performed for our reporting units for the year ended December 31, 2013.

ALLOWANCE FOR DOUBTFUL ACCOUNTS

 We record an allowance for doubtful accounts as an estimate of the inability of our customers to make their required payments. We determine the amount of our allowance for doubtful accounts by looking at a variety of factors. First, we examine an aging report of the accounts receivable in each entity within the Company. The aging report lists past due amounts according to invoice terms. In addition, we consider historical experience with the customers, the current economic environment, the credit rating of the customers and general overall market conditions. In some countries we maintain credit insurance, which can be used in certain cases of non-payment.

        We believe that the accounting estimate related to the allowance for doubtful accounts is a critical accounting estimate because: (1) it requires management to make assumptions about the ability to collect amounts owed from customers in the future, and (2) changes to these assumptions or estimates could have a material impact on our results of operations. The estimate for the allowance for doubtful accounts is a critical accounting estimate for all of our segments.

        When we determine that a customer is unlikely to pay, we record a charge to bad debt expense in the income statement and an increase to the allowance for doubtful accounts. When it becomes certain the customer cannot pay (typically driven by the customer filing for bankruptcy) we write off the receivable by removing the accounts receivable amount and reducing the allowance for doubtful accounts accordingly. In 2013, we reduced the allowance for doubtful accounts by approximately $381 thousand and we wrote off doubtful accounts of $2.0 million. Please refer to Schedule II—Valuation and Qualifying Accounts for activity in the allowance for doubtful accounts over the past three years.

        We had approximately $438.2 million in net accounts receivable at December 31, 2013. At December 31, 2013, we had approximately $4.4 million recorded in the allowance for doubtful accounts to cover potential future customer non-payments net of any credit insurance reimbursement we would potentially recover. We believe our allowance for doubtful accounts is adequate to cover future non-payments of our customers. However, if economic conditions deteriorate significantly or one of our large customers was to declare bankruptcy, a larger allowance for doubtful accounts might be necessary. It is extremely difficult to estimate how much of an additional reserve would be necessary, but we expect the largest potential customer balance at any one time would not exceed $22 million. An additional loss of $22 million would reduce our Total Assets as of December 31, 2013 by less than 1% and would have reduced Income Before Income Taxes by approximately 8%.

21 /ATR

2013 Form 10-K

---

Table of Contents

        If we had been required to recognize an additional $22 million in bad debt expense, it would likely not have significantly affected our liquidity and capital resources because, in spite of any such additional expense, we would have been within the terms of our debt covenants.

VALUATION OF PENSION BENEFITS

 The benefit obligations and net periodic pension cost associated with our domestic and foreign noncontributory pension plans are determined using actuarial assumptions. Such assumptions include discount rates to reflect the time value of money, rate of employee compensation increases, demographic assumptions to determine the probability and timing of benefit payments, and the long-term rate of return on plan assets. The actuarial assumptions are based upon management's best estimates, after consulting with outside investment advisors and actuaries. Because assumptions and estimates are used, actual results could differ from expected results.

        The discount rate is utilized principally in calculating our pension obligations, which are represented by the Accumulated Benefit Obligation (ABO) and the Projected Benefit Obligation (PBO), and in calculating net periodic benefit cost. In establishing the discount rate for our foreign plans, we review a number of relevant interest rates including Aa corporate bond yields. In establishing the discount rate for our domestic plans, we match the hypothetical duration of our plans, using a weighted average duration that is based upon projected cash payments, to a simulated bond portfolio (Citigroup Pension Index Curve). At December 31, 2013, the discount rates for our domestic and foreign plans were 4.75% and 3.24%, respectively.

        We believe that the accounting estimates related to determining the valuation of pension benefits are critical accounting estimates because: (1) changes in them can materially affect net income, and (2) we are required to establish the discount rate and the expected return on fund assets, which are highly uncertain and require judgment. The estimates for the valuation of pension benefits are critical accounting estimates for all of our segments.

        To the extent the discount rates increase (or decrease), our PBO and net periodic benefit cost will decrease (or increase) accordingly. The estimated effect of a 1% decrease in each discount rate would be a $40.4 million increase in the PBO ($27.7 million for the domestic plans and $12.7 million for the foreign plans) and a $5.6 million increase in net periodic benefit cost ($4.6 million for the domestic plans and $1.0 million for the foreign plans). To the extent the PBO increases, the after-tax effect of such increase could reduce Other Comprehensive Income and Stockholders' Equity. The estimated effect of a 1% increase in each discount rate would be a $31.7 million decrease in the PBO ($21.5 million for the domestic plans and $10.2 million for the foreign plans) and a $4.4 million decrease in net periodic benefit cost ($3.6 million for the domestic plans and $0.8 million for the foreign plans). A decrease of this magnitude in the PBO would eliminate a substantial portion of the related reduction in Other Comprehensive Income and Stockholders' Equity.

        The assumed expected long-term rate of return on assets is the average rate of earnings expected on the funds invested to provide for the benefits included in the PBO. Of domestic plan assets, approximately 59% was invested in equities, 24% was invested in fixed income securities, 9% was invested in money market funds and 8% was invested in infrastructure securities at December 31, 2013. Of foreign plan assets, approximately 78% was invested in investment funds, 16% was invested in fixed income securities, 5% was invested in equity securities and 1% was invested in cash at December 31, 2013.

        The expected long-term rate of return assumptions are determined based on our investment policy combined with expected risk premiums of equities and fixed income securities over the underlying risk-free rate. This rate is utilized principally in calculating the expected return on the plan assets component of the net periodic benefit cost. To the extent the actual rate of return on assets realized over the course of a year is greater or less than the assumed rate, that year's net periodic benefit cost is not affected. Rather, this gain (or loss) reduces (or increases) future net periodic benefit cost over a period of approximately 15 to 20 years. To the extent the expected long-term rate of return on assets increases (or decreases), our net periodic benefit cost will decrease (or increase) accordingly. The estimated effect of a 1% decrease (or increase) in each expected long-term rate of return on assets would be a $1.3 million increase (or decrease) in net periodic benefit cost.

        The average rate of compensation increase is utilized principally in calculating the PBO and the net periodic benefit cost. The estimated effect of a 0.5% decrease in each rate of expected compensation increase would be a $5.2 million decrease in the PBO ($1.4 million for the domestic plans and $3.8 million for the foreign plans) and a $1.0 million decrease to the net periodic benefit cost. The estimated effect of a 0.5% increase in each rate of expected compensation increase would be a $5.7 million increase in the PBO ($1.4 million for the domestic plans and $4.3 million for the foreign plans) and a $1.1 million increase to the net periodic benefit cost.

22 /ATR

2013 Form 10-K

---

Table of Contents

        Our primary pension related assumptions as of December 31, 2013 and 2012 were as follows:

        In order to determine the 2014 net periodic benefit cost, the Company expects to use the December 31, 2013 discount rates, December 31, 2013 rates of compensation increase assumptions and expected long-term returns on domestic and foreign plan assets assumptions used for the 2013 net periodic benefit cost. The estimated impact of the changes to the assumptions as noted in the table above on our 2014 net periodic benefit cost is expected to be a decrease of approximately $4 million.

SHARE-BASED COMPENSATION

 The Company uses the Black-Scholes option-valuation model to value stock options, which requires the input of subjective assumptions. These assumptions include the length of time employees will retain their vested stock options before exercising them ("expected term"), the estimated volatility of the Company's stock price, risk-free interest rate, the expected dividend yield and stock price. The expected term of the options is based on historical experience of similar awards, giving consideration to the contractual terms, vesting schedules and expectations of future employee behavior. The expected term determines the period for which the risk-free interest rate and volatility must be applied. The risk-free interest rate is based on the expected U.S. Treasury rate over the expected term. Expected stock price volatility is based on historical volatility of the Company's stock price. Dividend yield is management's long-term estimate of annual dividends to be paid as a percentage of share price.

        For 2013, expense related to share-based compensation was $13.7 million and represented approximately $0.13 per diluted share. Future changes in the subjective assumptions used in the Black-Scholes option-valuation model or estimates associated with forfeitures could impact our share-based compensation expense. For example, a one year reduction in the expected term of the options would decrease the Black-Scholes valuation and reduce share-based compensation by approximately $0.4 million. On the contrary, a one year increase in the expected term of the option would increase the Black-Scholes valuation and increase share-based compensation by approximately $0.3 million. In addition, changes in the stock price at the date of the grant would impact our share-based compensation expense. For example, a $5 decrease in the stock price would decrease the Black-Scholes valuation and reduce share-based compensation by approximately $0.7 million. On the contrary, a $5 increase in the stock price would increase the Black-Scholes valuation and increase share-based compensation by approximately $0.7 million.

OPERATIONS OUTLOOK

 We are encouraged by the level of project dialog we have with our customers across each of our segments and we expect improved results in the first quarter of 2014 compared to the prior year. However, the challenging currency environment, especially in Latin America and Southeast Asia, is expected to continue. We are also facing higher tax rates compared to a year ago.

        AptarGroup expects diluted earnings per share for the first quarter of 2014 to be in the range of $0.65 to $0.70 per share compared to $0.64 per share reported in the first quarter of 2013 excluding costs associated with the European restructuring plan (approximately $0.05 per share).

23 /ATR

2013 Form 10-K

---

Table of Contents

FORWARD-LOOKING STATEMENTS

 Certain statements in Management's Discussion and Analysis and other sections of this Form 10-K are forward-looking and involve a number of risks and uncertainties, including certain statements set forth in the Liquidity and Capital Resources, Off- Balance Sheet Arrangements, and Operations Outlook sections of this Form 10-K. Words such as "expects," "anticipates," "believes," "estimates," and other similar expressions or future or conditional verbs such as "will," "should," "would" and "could" are intended to identify such forward-looking statements. Forward-looking statements are made pursuant to the safe harbor provisions of Section 27A of the Securities Act of 1933 and Section 21E of the Securities Exchange Act of 1934 and are based on our beliefs as well as assumptions made by and information currently available to us. Accordingly, our actual results may differ materially from those expressed or implied in such forward-looking statements due to known or unknown risks and uncertainties that exist in our operations and business environment, including but not limited to:

•

economic, environmental and political conditions worldwide;

•

changes in customer and/or consumer spending levels;

•

financial conditions of customers and suppliers;

•

the cost of materials and other input costs (particularly resin, metal, anodization costs and transportation and energy costs);

•

the availability of raw materials and components (particularly from sole sourced suppliers) as well as the financial viability of these suppliers;

•

our ability to contain costs and improve productivity;

•

our ability to successfully implement facility expansions and new facility projects, including the Stelmi expansion and our new facility in Colombia;

•

our ability to increase prices, contain costs and improve productivity;

•

significant fluctuations in foreign currency exchange rates;

•

changes in capital availability or cost, including interest rate fluctuations;

•

volatility of global credit markets;

•

the timing and magnitude of capital expenditures;

•

our ability to identify potential new acquisitions and to successfully acquire and integrate such operations or products;

•

direct or indirect consequences of acts of war or terrorism;

•

cybersecurity threats that could impact our networks and reporting systems;

•

the impact of natural disasters and other weather-related occurrences;

•

fiscal and monetary policy, including changes in worldwide tax rates;

•

changes or difficulties in complying with government regulation;

•

changing regulations or market conditions regarding environmental sustainability;

•

work stoppages due to labor disputes;

•

competition, including technological advances;

•

our ability to protect and defend our intellectual property rights, as well as litigation involving intellectual property rights;

•

the outcome of any legal proceeding that has been or may be instituted against us and others;

•

our ability to meet future cash flow estimates to support our goodwill impairment testing;

•

the demand for existing and new products;

•

our ability to manage worldwide customer launches of complex technical products, in particular in developing markets;

•

the success of our customers' products, particularly in the pharmaceutical industry;

•

difficulties in product development and uncertainties related to the timing or outcome of product development;

•

significant product liability claims; and

•

other risks associated with our operations.

        Although we believe that our forward-looking statements are based on reasonable assumptions, there can be no assurance that actual results, performance or achievements will not differ materially from any future results, performance or achievements expressed or implied by such forward-looking statements. Readers are cautioned not to place undue reliance on forward-looking statements. We undertake no obligation to update publicly any forward-looking statements, whether as a result of new information, future events or otherwise, except as required by law. Please refer to Item 1A ("Risk Factors") of Part I included in this Form 10-K for additional risk factors affecting the Company.

24 /ATR

2013 Form 10-K

---

Table of Contents

ITEM 7A.    QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK

MARKET RISKS

 A significant number of our operations are located outside of the United States. Because of this, movements in exchange rates may have a significant impact on the translation of the financial condition and results of operations of our entities. Our primary foreign exchange exposure is to the Euro, but we also have foreign exchange exposure to the Brazilian Real, British Pound, Swiss Franc and South American and Asian currencies, among others. A weakening U.S. dollar relative to foreign currencies has an additive translation effect on our financial condition and results of operations. Conversely, a strengthening U.S. dollar has a dilutive effect.

        Additionally, in some cases, we sell products denominated in a currency different from the currency in which the related costs are incurred. Any changes in exchange rates on such inter-country sales may impact our results of operations.

        We manage our exposures to foreign exchange principally with forward exchange contracts to hedge certain firm purchase and sales commitments and intercompany cash transactions denominated in foreign currencies.

        The table below provides information, as of December 31, 2013, about our forward currency exchange contracts. The majority of the contracts expire before the end of the first quarter of 2014.

        As of December 31, 2013, the Company has recorded the fair value of foreign currency forward exchange contracts of $3.0 million in prepayments and other, $1.0 million in miscellaneous other assets, $0.5 million in accounts payable and accrued liabilities and $0.1 million in deferred and other non-current liabilities in the balance sheet.

        The Company maintained an interest rate swap to convert a portion of its fixed-rate debt into variable-rate debt until May 31, 2011. Under the interest rate swap contract, the Company exchanged, at specified intervals, the difference between fixed-rate and floating-rate amounts, which was calculated based on an agreed upon notional amount. On May 31, 2011, this interest rate swap contract matured and was not renewed. No gain or loss was recorded in the income statement in 2011 as any hedge ineffectiveness for the period was immaterial.

        The Company had one foreign currency cash flow hedge until March 15, 2012. A French subsidiary of AptarGroup, AptarGroup Holding SAS, had hedged the risk of variability in Euro equivalent associated with the cash flows of an intercompany loan granted in Brazilian Real. The forward contracts utilized were designated as a hedge of the changes in the cash flows relating to the changes in foreign currency rates relating to the loan and related forecasted interest. On March 15, 2012, the loan and foreign currency forward contracts were repaid. During the year ended December 31, 2012, the Company did not recognize any net gain (loss) as any hedge ineffectiveness for the period was immaterial, and the Company did not recognize any net gain (loss) related to the portion of the hedging instrument excluded from the assessment of hedge effectiveness.

25 /ATR

2013 Form 10-K

---

Table of Contents

ITEM 8.    FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA

AptarGroup, Inc.

 

CONSOLIDATED STATEMENTS OF INCOME

See accompanying notes to consolidated financial statements.

26 /ATR

2013 Form 10-K

---

Table of Contents

AptarGroup, Inc.

 

CONSOLIDATED STATEMENTS OF COMPREHENSIVE INCOME

See accompanying notes to consolidated financial statements.

27 /ATR

2013 Form 10-K

---

Table of Contents

AptarGroup, Inc.

 

CONSOLIDATED BALANCE SHEETS

See accompanying notes to consolidated financial statements.

28 /ATR

2013 Form 10-K

---

Table of Contents

AptarGroup, Inc.

CONSOLIDATED BALANCE SHEETS

See accompanying notes to consolidated financial statements.

29 /ATR

2013 Form 10-K

---

Table of Contents

AptarGroup, Inc.

 

CONSOLIDATED STATEMENTS OF CASH FLOWS

See accompanying notes to consolidated financial statements.

30 /ATR

2013 Form 10-K

---

Table of Contents

AptarGroup, Inc.

 

CONSOLIDATED STATEMENTS OF CHANGES IN EQUITY
Years Ended December 31, 2012, 2011 and 2010

See accompanying notes to consolidated financial statements.

31 /ATR

2013 Form 10-K

---

Table of Contents

AptarGroup, Inc.

 

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
(Amounts in thousands unless otherwise indicated)

NOTE 1 SUMMARY OF SIGNIFICANT ACCOUNTING POLICIES

NATURE OF BUSINESS

 We create dispensing solutions that enhance the convenience, safety and security of consumers around the globe and allow our customers to differentiate their products in the market. The Company focuses on providing value-added packaging delivery systems to a variety of global consumer product marketers in the beauty, personal care, home care, prescription drug, consumer health care, injectables, food and beverage industries. The Company has manufacturing facilities located throughout the world including North America, Europe, Asia and Latin America.

BASIS OF PRESENTATION

 The accompanying consolidated financial statements include the accounts of AptarGroup, Inc. and its subsidiaries. The terms "AptarGroup" or "Company" as used herein refer to AptarGroup, Inc. and its subsidiaries. All significant intercompany accounts and transactions have been eliminated. Certain previously reported amounts have been reclassified to conform to the current period presentation.

        AptarGroup's organizational structure consists of three market-focused lines of business which are Beauty + Home, Pharma and Food + Beverage. This is a strategic structure which allows us to be more closely aligned with our customers and the markets in which they operate.

        On November 1, 2012, the Company initiated our European restructuring plan (see Note 19 Restructuring Initiatives for further details). During 2013, the Company recognized approximately $14.6 million of expense related to the plan, of which $2.7 million was accelerated depreciation. For presentation purposes, the accelerated depreciation related to this plan is reported in Depreciation and Amortization within the Consolidated Statements of Income.

ACCOUNTING ESTIMATES

 The financial statements are prepared in conformity with accounting principles generally accepted in the United States of America ("GAAP"). This process requires management to make estimates and assumptions that affect the reported amounts of assets and liabilities and disclosure of contingent assets and liabilities at the date of the financial statements and the reported amounts of revenue and expenses during the reporting period. Actual results could differ from those estimates.

CASH MANAGEMENT

 The Company considers all investments which are readily convertible to known amounts of cash with an original maturity of three months or less when purchased to be cash equivalents.

INVENTORIES

 Inventories are stated at lower of cost or market. Costs included in inventories are raw materials, direct labor and manufacturing overhead. The costs of certain domestic and foreign inventories are determined by using the last-in, first-out ("LIFO") method, while the remaining inventories are valued using the first-in, first-out ("FIFO") method.

INVESTMENTS IN AFFILIATED COMPANIES

 The Company accounts for its investments in 20% to 50% owned affiliated companies using the equity method. There were no dividends received from affiliated companies in 2013, 2012 and 2011.

PROPERTY AND DEPRECIATION

 Properties are stated at cost. Depreciation is determined on a straight-line basis over the estimated useful lives for financial reporting purposes and accelerated methods for income tax reporting. Generally, the estimated useful lives are 25 to 40 years for buildings and improvements, 3 to 10 years for machinery and equipment, and 3 to 7 years for software.

FINITE-LIVED INTANGIBLE ASSETS

 Finite-lived intangibles, consisting of patents, non-compete agreements and license agreements acquired in purchase transactions, are capitalized and amortized over their useful lives which range from 3 to 20 years.

GOODWILL

 Management believes the excess purchase price over the fair value of the net assets acquired ("Goodwill") in purchase transactions has continuing value. Goodwill is not amortized and must be tested annually, or more frequently as circumstances dictate, for impairment. The annual goodwill impairment test may first consider qualitative factors to determine whether it is more likely than not (i.e. greater than 50 percent chance) that the fair value of a reporting unit is less than its book value. This is sometimes referred to as the "step zero" approach and is an optional step in the annual goodwill impairment analysis. Management has performed this qualitative assessment as of December 31, 2013 for all four of our reporting units. Based on our review of macroeconomic, industry, and market events and circumstances as well as the overall financial

32 /ATR

2013 Form 10-K

---

Table of Contents

performance of the reporting units, we determined it was more likely than not that the fair value of goodwill attributed to all four of our reporting units was greater than its carrying amount. Therefore, no impairment of goodwill has been recorded.

IMPAIRMENT OF LONG-LIVED ASSETS

 Long-lived assets, such as property, plant and equipment and finite-lived intangibles, are evaluated for impairment whenever events or changes in circumstances indicate that the carrying value of an asset may not be recoverable. An impairment loss is recognized when estimated undiscounted future cash flows expected to result from the use of the asset plus net proceeds expected from disposition of the asset (if any) are less than the carrying value of the asset. During 2013, we recognized a $1.5 million adjustment for accelerated depreciation on certain corporate assets to reduce the carrying amount to the fair value.

DERIVATIVES INSTRUMENTS AND HEDGING ACTIVITIES

 Derivative financial instruments are recorded in the consolidated balance sheets at fair value as either assets or liabilities. Changes in the fair value of derivatives are recorded in each period in earnings or accumulated other comprehensive income, depending on whether a derivative is designated and effective as part of a hedge transaction.

RESEARCH & DEVELOPMENT EXPENSES

 Research and development costs, net of any customer funded research and development or government research and development credits, are expensed as incurred. These costs amounted to $71.8 million, $65.4 million and $67.0 million in 2013, 2012 and 2011, respectively.

INCOME TAXES

 The Company computes taxes on income in accordance with the tax rules and regulations of the many taxing authorities where the income is earned. The income tax rates imposed by these taxing authorities may vary substantially. Taxable income may differ from pretax income for financial accounting purposes. To the extent that these differences create timing differences between the tax basis of an asset or liability and its reported amount in the financial statements, an appropriate provision for deferred income taxes is made.

        In its determination of which foreign earnings are permanently reinvested in foreign operations, the Company considers numerous factors, including the financial requirements of the U.S. parent company and those of its foreign subsidiaries, the U.S. funding needs for dividend payments and stock repurchases, and the tax consequences of remitting earnings to the U.S. From this analysis, current year repatriation decisions are made in an attempt to provide a proper mix of debt and shareholder capital both within the U.S. and for non-U.S. operations. The Company's policy is to permanently reinvest its accumulated foreign earnings and only will make a distribution out of current year earnings to meet the cash needs at the parent company. As such, the Company does not provide taxes on earnings that are deemed to be permanently reinvested.

        The Company provides a liability for the amount of tax benefits realized from uncertain tax positions. This liability is provided whenever the Company determines that a tax benefit will not meet a more likely than not threshold for recognition. See Note 5 for more information.

TRANSLATION OF FOREIGN CURRENCIES

 The functional currencies of all the Company's foreign operations are the local currencies. Assets and liabilities are translated into U.S. dollars at the rates of exchange on the balance sheet date. Sales and expenses are translated at the average rates of exchange prevailing during the year. The related translation adjustments are accumulated in a separate section of Stockholders' Equity. Realized and unrealized foreign currency transaction gains and losses are reflected in income, as a component of miscellaneous income and expense, and represented a loss of $6.3 million in 2013, a loss of $1.6 million in 2012, and a gain of $1.5 million in 2011.

STOCK BASED COMPENSATION

 Accounting standards require the application of the non-substantive vesting approach which means that an award is fully vested when the employee's retention of the award is no longer contingent on providing subsequent service. Under this approach, compensation costs are recognized over the requisite service period of the award instead of ratably over the vesting period stated in the grant. As such, costs are recognized immediately if the employee is retirement eligible on the date of grant or over the period from the date of grant until retirement eligibility if retirement eligibility is reached before the end of the vesting period stated in the grant. See Note 15 for more information.

REVENUE RECOGNITION

 Product Sales.    The Company's policy is to recognize revenue from product sales when price is fixed and determinable, when the title and risk of loss has transferred to the customer, when the Company has no remaining obligations regarding the transaction and when collection is reasonably assured. The majority of the Company's products shipped from the U.S. transfers title and risk of loss when the goods leave the Company's shipping location. The majority of the Company's products shipped from non-U.S. operations transfer title and risk of loss when the goods reach their destination. Tooling revenue is also recognized when the title and risk of loss transfers to the customer.

33 /ATR

2013 Form 10-K

---

Table of Contents

 Services and Other.    The Company occasionally invoices customers for certain services. The Company also receives revenue from other sources such as license or royalty agreements. Revenue is recognized when services are rendered or rights to use assets can be reliably measured and when collection is reasonably assured. Service and other revenue is not material to the Company's results of operations for any of the years presented.

ADOPTION OF RECENT ACCOUNTING PRONOUNCEMENTS

 In January 2013, The FASB issued authoritative guidance requiring new asset and liability offsetting disclosures for derivatives, repurchase agreements and security lending transactions to the extent that they are offset in the financial statements or are subject to an enforceable master netting arrangement or similar agreement. We do not have any repurchase agreements and do not participate in securities lending transactions. Our derivative instruments are not offset in the financial statements. Accordingly, the adoption of this standard had no impact on the Consolidated Financial Statements other than disclosure. Additional information can be found in Note 10 of the Notes to the Consolidated Financial Statements.

        In February 2013, The FASB issued authoritative guidance that amends the presentation of accumulated other comprehensive income and clarifies how to report the effect of significant reclassifications out of accumulated other comprehensive income. The guidance requires footnote disclosures regarding the changes in accumulated other comprehensive income by component and the line items affected in the statements of earnings. The adoption of this standard had no impact on the Consolidated Financial Statements other than disclosure. Additional information can be found in Note 9 of the Notes to the Consolidated Financial Statements.

        Other accounting standards that have been issued by the FASB or other standards-setting bodies that do not require adoption until a future date are not expected to have a material impact on our consolidated financial statements upon adoption.

NOTE 2 INVENTORIES

 At December 31, 2013 and 2012, approximately 20% and 19%, respectively, of the total inventories are accounted for by the LIFO method. Inventories, by component, consisted of:

NOTE 3 GOODWILL AND OTHER INTANGIBLE ASSETS

 The changes in the carrying amount of goodwill for the year ended December 31, 2013 are as follows by reporting segment:

34 /ATR

2013 Form 10-K

---

Table of Contents

        The Company has also completed the annual impairment analysis of its reporting units as of December 31, 2013 using a qualitative analysis of goodwill commonly referred to as the "step zero" approach. Based on our review of macroeconomic, industry, and market events and circumstances as well as the overall financial performance of the reporting units, we determined it was more likely than not that the fair value of goodwill attributed to all four of our reporting units was greater than its carrying amount. Therefore, no impairment of goodwill has been recorded.

        The table below shows a summary of intangible assets for the years ended December 31, 2013 and 2012.

        Aggregate amortization expense for the intangible assets above for the years ended December 31, 2013, 2012 and 2011 was $5,033, $3,177, and $2,195, respectively.

        Estimated amortization expense for the years ending December 31 is as follows:

        Future amortization expense may fluctuate depending on changes in foreign currency rates. The estimates for amortization expense noted above are based upon foreign exchange rates as of December 31, 2013.

NOTE 4 ACCOUNTS PAYABLE AND ACCRUED LIABILITIES

 At December 31, 2013 and 2012, accounts payable and accrued liabilities consisted of the following:

35 /ATR

2013 Form 10-K

---

Table of Contents

NOTE 5 INCOME TAXES

 Income before income taxes consists of:

        The provision (benefit) for income taxes is comprised of:

---

        The difference between the actual income tax provision and the tax provision computed by applying the statutory federal income tax rate of 35.0% in 2013, 2012 and 2011 to income before income taxes is as follows:

        The tax provision for 2013 reflects an increase of $6.7 million due to tax law changes in France. These changes were enacted on December 31, 2013 but retroactive to January 1, 2013. An additional $2.3 million of tax was incurred as a result of new French distribution taxes effective for distributions after August 17, 2012. The increases were partially offset by a benefit of $3.6 million from the expected use of net operating losses in Brazil and a benefit of $1.4 million from a tax law change in Italy.

        The tax provision for 2012 reflects the benefit of $0.7 million in Brazil related to claims filed under a program to encourage equity funding of Brazilian entities and deferred tax benefits of $1.8 million, due in part to the merger of some of the company's Indian operations. These benefits were partially offset by $0.7 million of additional expense created by tax law changes enacted in 2012 in France.

        The tax provision for 2011 reflects the benefit of $0.7 million in Brazil related to claims filed under a program to encourage equity funding of Brazilian entities. An income tax surcharge enacted in France in December 2011 resulted in additional tax expense of $1.2 million in 2011.

36 /ATR

2013 Form 10-K

---

Table of Contents

        Significant deferred tax assets and liabilities as of December 31, 2013 and 2012 are comprised of the following temporary differences:

---

        There is no expiration date on $5.3 million of the tax-effected net operating loss carryforwards and $1.4 million (tax effected) will expire in the years 2014 to 2028. The U.S. state tax credit carryforwards of $6.2 million (tax effected) will expire in the years 2014 to 2028. The total amount of both net operating losses and state tax credit carryforwards that will expire in 2014 is $0.1 million. This amount is not expected to be used.

        The Company evaluates the deferred tax assets and records a valuation allowance when it is believed it is more likely than not that the benefit will not be realized. The Company has established a valuation allowance of $1.4 million of the $6.7 million of tax effected net operating loss carry forwards. These losses are in start-up jurisdictions or locations that have not produced an operating profit to date. A valuation allowance of $2.9 million has been established against the $6.2 million of U.S. state tax credit carry forwards. A valuation allowance of $0.5 million has been established related to other future tax deductions in non-U.S. jurisdictions, the benefit of which management believes will not be realized.

        The Company repatriated a portion of non-U.S. subsidiary earnings in 2013, 2012, and 2011 in the amounts of $79 million, $79 million, and $82 million, respectively. All of these amounts were received from our European operations except for $1.3 million from Canada in 2012. All repatriations from Europe were from current year earnings and not from funds previously considered permanently reinvested. The $1.3 million of Canadian funds were distributed as the result of the completion of our 2009 restructuring activities within Canada. The tax effects related to these repatriations were recorded in the period the repatriation decision was made.

        As of December 31, 2013, the Company had $1.1 billion of undistributed earnings from non-U.S. subsidiaries which have been designated as permanently reinvested. The Company has not made a provision for U.S. or additional foreign taxes on this amount as it is not practical to estimate the amount of additional tax that might be payable on these undistributed non-U.S. earnings. These earnings will continue to be reinvested indefinitely and could become subject to additional tax if they were remitted as dividends or lent to a U.S. affiliate, or if the Company should sell its stock in the subsidiaries.

        The Company has not provided for taxes on certain tax-deferred income of a foreign operation. The income arose predominately from government grants. Taxes of approximately $2.4 million would become payable in the event the terms of the grant are not fulfilled.

37 /ATR

2013 Form 10-K

---

Table of Contents

INCOME TAX UNCERTAINTIES

 The Company provides a liability for the amount of tax benefits realized from uncertain tax positions. A reconciliation of the beginning and ending amount of income tax uncertainties is as follows:

        The amount of income tax uncertainties that, if recognized, would impact the effective tax rate is $7.8 million. The Company estimates that it is reasonably possible that the liability for uncertain tax positions will decrease no more than $5 million in the next twelve months from the resolution of various uncertain positions as a result of the completion of tax audits, litigation and the expiration of the statute of limitations in various jurisdictions.

        The Company recognizes interest and penalties accrued related to unrecognized tax benefits as a component of income taxes. As of December 31, 2013, 2012 and 2011, the Company had approximately $0.9 million, $1.3 million and $1.4 million, respectively, accrued for the payment of interest and penalties, of which approximately ($0.4) million, ($0.1) million and ($0.2) million was recognized in income tax expense in the years ended December 31, 2013, 2012 and 2011, respectively.

        The Company or its subsidiaries file income tax returns in the U.S. Federal jurisdiction and various state and foreign jurisdictions. The major tax jurisdictions the Company files in, with the years still subject to income tax examinations, are listed below:

NOTE 6 DEBT

 Average borrowings under unsecured lines of credit were $61.4 million and $110.3 million for 2013 and 2012, respectively, and the average annual interest rate on short-term notes payable, which is included in the notes payable caption under current liabilities of the balance sheet was approximately 3.1% for 2013 and 2.1% for 2012. There are no compensating balance requirements associated with short-term borrowings.

        On January 31, 2012, we entered into a revolving credit facility that provides for unsecured financing of up to $300 million. Each borrowing under this credit facility will bear interest at rates based on LIBOR, prime rates or other similar rates, in each case plus an applicable margin. A facility fee on the total amount of the facility is also payable quarterly, regardless of usage. The applicable margins for borrowings under the new credit facility and the facility fee percentage may change from time to time depending on changes in AptarGroup's consolidated leverage ratio. On January 31, 2013, we amended the revolving credit facility to, among other things, add a swingline loan sub-facility and extend the maturity date for the revolving credit facility by one year, to January 31, 2018. On January 31, 2014, we amended the revolving credit facility to, among other things, increase the amount of permitted receivables transactions from $100 to $150 million, reduce the cost of committed funds by 12.5 basis points and uncommitted funds by 2.5 basis points, and extend the maturity date of the revolving credit facility by one year, to January 31, 2019. The outstanding balance under the credit facility was $110 million at December 31, 2013 and is reported as notes payable in the current liabilities section of the Consolidated Balance Sheet. We incurred approximately $1.0 million in interest and fees related to this credit facility during 2013. The revolving credit and the senior unsecured debt agreements contain covenants, with which the Company is in compliance, that include certain financial tests.

38 /ATR

2013 Form 10-K

---

Table of Contents

        At December 31, the Company's long-term obligations consisted of the following:

---

        Aggregate long-term maturities, excluding capital lease obligations, which is discussed in Note 7, due annually for the five years beginning in 2014 are $801, $16,055, $50,056, $56, $75,119 and $211,143 thereafter.

NOTE 7 LEASE COMMITMENTS

 The Company leases certain warehouse, plant, and office facilities as well as certain equipment under noncancelable operating and capital leases expiring at various dates through the year 2027. Most of the operating leases contain renewal options and certain leases include options to purchase during or at the end of the lease term.

        Amortization expense related to capital leases is included in depreciation expense. Rent expense under operating leases (including taxes, insurance and maintenance when included in the rent) amounted to $30,720, $26,911 and $27,558 in 2013, 2012 and 2011, respectively.

        Assets recorded under capital leases consist of:

---

        Future minimum payments, by year and in the aggregate, under the capital leases and noncancelable operating leases with initial or remaining terms of one year or more consisted of the following at December 31, 2013:

39 /ATR

2013 Form 10-K

---

Table of Contents

NOTE 8 RETIREMENT AND DEFERRED COMPENSATION PLANS

 The Company has various noncontributory retirement plans covering certain of its domestic and foreign employees. Benefits under the Company's retirement plans are based on participants' years of service and annual compensation as defined by each plan. Annual cash contributions to fund pension costs accrued under the Company's domestic plans are generally at least equal to the minimum funding amounts required by the Employee Retirement Income Security Act of 1974, as amended (ERISA). Certain pension commitments under its foreign plans are also funded according to local requirements or at the Company's discretion.

        The following table presents the changes in the benefit obligations and plan assets for the most recent two years for the Company's domestic and foreign plans.

 

        The following table presents the funded status amounts recognized in the Company's Consolidated Balance Sheets as of December 31, 2013 and 2012.

        The following table presents the amounts not recognized as components of periodic benefit cost that are recognized in accumulated other comprehensive loss as of December 31, 2013 and 2012.

40 /ATR

2013 Form 10-K

---

Table of Contents

        Changes in benefit obligations and plan assets recognized in other comprehensive income in 2013 are as follows:

        The following table presents the amounts in accumulated other comprehensive loss as of December 31, 2013 expected to be recognized as components of periodic benefit cost in 2014.

Components of net periodic benefit cost:

 

        The accumulated benefit obligation ("ABO") for the Company's domestic defined benefit pension plans was $114.6 million and $118.8 million at December 31, 2013 and 2012, respectively. The accumulated benefit obligation for the Company's foreign defined benefit pension plans was $67.0 million and $63.6 million at December 31, 2013 and 2012, respectively.

        The following table provides the projected benefit obligation ("PBO"), ABO, and fair value of plan assets for all pension plans with an ABO in excess of plan assets as of December 31, 2013 and 2012.

41 /ATR

2013 Form 10-K

---

Table of Contents

        The following table provides the PBO, ABO, and fair value of plan assets for all pension plans with a PBO in excess of plan assets as of December 31, 2013 and 2012.

Assumptions:

        The Company develops the expected long-term rate of return assumptions based on historical experience and by evaluating input from the plans' asset managers, including the managers' review of asset class return expectations and benchmarks, economic indicators and long-term inflation assumptions.

        In order to determine the 2014 net periodic benefit cost, the Company expects to use the December 31, 2013 discount rates, December 31, 2013 rates of compensation increase assumptions and the same assumed long-term returns on domestic and foreign plan assets used for the 2013 net periodic benefit cost.

        The Company's domestic and foreign pension plan weighted-average asset allocations at December 31, 2013 and 2012 by asset category are as follows:

Plan Assets:

        The Company's investment strategy for its domestic and foreign pension plans is to maximize the long-term rate of return on plan assets within an acceptable level of risk. The investment policy strives to have assets sufficiently diversified so that adverse or unexpected results from one security type will not have an unduly detrimental impact on the entire portfolio and accordingly, establishes a target allocation for each asset category within the portfolio. The domestic plan asset allocation is reviewed on a quarterly basis and the foreign plan asset allocation is reviewed annually. Rebalancing occurs as needed to comply with the investment strategy. The domestic plan target allocation for 2014 is 60% equity securities and 40% fixed income securities and infrastructure. The foreign plan target allocation for 2014 is 96% investment funds, and 4% money market.

42 /ATR

2013 Form 10-K

---

Table of Contents

        Authoritative guidelines require the categorization of assets and liabilities into three levels based upon the assumptions (inputs) used to price the assets or liabilities. Level 1 provides the most reliable measure of fair value, whereas Level 3 generally requires significant management judgment. The three levels are defined as follows:

•

Level 1: Unadjusted quoted prices in active markets for identical assets and liabilities.

•

Level 2: Observable inputs other than those included in Level 1. For example, quoted prices for similar assets or liabilities in active markets or quoted prices for identical assets or liabilities in inactive markets.

•

Level 3: Unobservable inputs reflecting management's own assumptions about the inputs used in pricing the asset or liability.